The Light of Domestic Products: The whole world begs me to sell

Chapter 245 Purchase 5nm lithography machine technology!
Hu Lai's sudden explosive news completely disrupted Chen Hai's original plan.

After hanging up the phone, Chen Hai looked extremely excited, even his eyes were shining with excitement.

"Mr. Hu, now that there is an emergency, the way we prepared for the trial will no longer be needed."

"Tomorrow, the leader will come to the mountain city in person. I will contact you at that time. Tonight, you should go back and have a good rest."

Hu Lai did not refuse either. He also knew that the 5nm lithography machine involved a lot of things, and it was also a huge hole card for this lawsuit, and most importantly, he needed to quickly enter the system to exchange the 5nm technology.

Soon, Hu Lai returned to the office of Phoenix Headquarters.

As soon as he entered the office, Hu Lai immediately entered the Guohuozhiguang system.

"Dear host, welcome to the Light of Domestic Products system."

Hu Lai went straight to the point, and quickly clicked on the chip in the system - the branch of the lithography machine.

Lithography machine technology arranges lithography machines with different processes, from top to bottom are sub-nanometer, 3 nanometers, 5 nanometers, 7 nanometers, and 14 nanometers.

He clicked on each technology one by one to determine the required points again. The sub-nanometer level is as high as 5 million points, 3nm also needs 2 million points, and 5nm requires 1 million points.

Now he has 2500 million points that can be paid in advance, plus the 1.25 million points accumulated in selling computers and new energy vehicles in the past six months, a total of [-] million points can be used.

There is no extra hesitation, and I am directly preparing to buy a 5nm EUV lithography machine. Not to mention a long time, the 5nm lithography machine will definitely be the world's top process within at least 3 years.

"Are you sure you choose to buy the '5nm EUV lithography machine' technology?"

"determine."

"It has been detected that you do not have enough points. Currently, you can advance a maximum of 10 million points, plus a 1.1% handling fee. You need to consume a total of [-] million points. Do you want to buy?"

"Sure!"

After a burst of bright light, Hu Lai was also a little excited.

However, he did not rush to check the technical manual of the 5nm lithography machine. Instead, he clicked on the NB-Y chip architecture that he had collected for a long time!

On the way back to the office, he thought it over clearly. The system credits can be used up to 1.25 million. Now after purchasing lithography machine technology and using 1.1 million, there are exactly 1500 million.

The NB-Y structure where 1500 million points are used to purchase 1000 million points is just right!
"Are you sure you choose to buy 'NB-Y' chip architecture technology?"

"Sure!"

Another yellow light flashed, and after seeing the debt of 1 million in the points column in the system, Hu Lai felt much more comfortable.

Now, with the NB-Y chip architecture technology, Phoenix Semiconductor can use the NB-Y architecture to design more dedicated chips, 5 nanometers, 7 nanometers, and 14 nanometers are all available!
And with the 5nm EUV lithography machine, all the means of restricting the Phoenix Group in country M will be invalid!

The ST list and the blockade of chip production are all jokes.

After Phoenix Semiconductor can produce high-end 5nm chips by itself, Phoenix notebook computers will have 5nm chips under the extremely powerful NB-Y architecture, and the Inet I5 and I7, which will not be killed by time, are "blood flowing"?
Not only Inet, but after being able to produce 5nm chips, will the entire mobile phone chips, such as Qualcomm and MediaTek, be turned upside down by Phoenix? !

Hu Lai smiled slightly, and skillfully copied the two technologies to the computer, and then opened the technical document of the 5nm lithography machine technology.

He has purchased the manufacturing documents of "Super Blue Sky Motor" in the system before, and he knows very well that the manufacturing documents in the system will provide the parts and technical description documents needed for manufacturing in great detail.

Explanation documents can be understood by professionals, but the more troublesome part is the procurement of parts.

Last time, in order to produce the "Super Blue Sky Motor", there was one of the induction coils that no domestic company could produce. In the end, the factory manager Zhang purchased materials from abroad before realizing the production.

The EUV lithography machine is much more complicated than the Super Blue Sky motor, and many parts and components are likely to be unable to be produced in China, and it is even not easy to purchase abroad in the current international environment.

Sure enough, seeing that more than 6 spare parts are needed among the spare parts, Hu Lai suddenly felt that things were not as simple as he thought.

but.

Hu Lai, who has experienced so many things, has long been calm. He did not contact Chen Hai in a hurry. Instead, he asked Factory Director Zhang to immediately notify his colleagues in the Phoenix Semiconductor Department who have knowledge of lithography machines to return to the company immediately.

It must also be that the Phoenix Group has been recruiting aggressively in recent years, especially since it has a 28nm domestic lithography machine, it has attracted a group of top semiconductor professionals to join.

Half an hour later, the semiconductor department of Phoenix Group was brightly lit, and more than 60 people who received the notice all came to the conference room.

Hu Lai had been waiting for a long time, and when he saw all the staff arrived, he said slowly:

"Dear colleagues, I'm sorry to let you go back to the company at such a late hour. There is a high probability that we need to stay up late to work today, but I will accompany you all."

Everyone saw that more than 60 people were suddenly recalled by the company, and they had already noticed in their hearts that something was unusual.

At this time, he was even more surprised to hear that Mr. Hu Lai would stay up late with everyone. In an instant, everyone couldn't help pricking up their ears, and all eyes were on Hu Lai.

"Everyone is a professional in the semiconductor industry. After a while, everyone will be assigned a list of spare parts. Our task tonight is to screen out the spare parts that cannot be made in the list..."

After getting the allocation list, everyone looked at each other in blank dismay.

Turtle.

More than half of the spare parts list is the spare parts needed for lithography machines. Is Phoenix Semiconductor going to start developing lithography machines?
96nm or 56nm lithography machine?It can't be 28 nanometers, can it? !

……

Time passed quickly, and when the sun rose, the lights of the Phoenix Semiconductor Department were still on.

Factory Manager Zhang stayed up all night like everyone else. At eight o'clock in the morning, he gently knocked on the door of Hu Lai's office.

At this time, Hu Lai was carefully reading the technical documentation of the 5nm lithography machine, and he spent the night like this.

Director Zhang walked in quickly with a document in his hand.

"Boss, here is the latest spare parts list."

"The time is too tight, and half of the work has not been completed, but now it has been confirmed that these more than 100 parts are not produced in China."

"One of them is to determine that we can't produce it in the country for a short time and it is not easy to buy, and it is a controlled item."

Hu Lai took the document and glanced at it.

The information written on the information is very clear, and the names of foreign manufacturers for spare parts that cannot be produced in China are clearly marked.

"Boss, the only thing we are sure is difficult to buy and can't produce is the mirror produced by Zeiss in D country."

"This mirror is not an ordinary mirror, it is the most critical part in the lithography machine. It is made of special materials. Its size is only 30 cm, but the entire mirror surface is very flat..."

"Let me make an analogy. If this 30cm mirror is enlarged to the size of the earth, then the entire mirror plane will only have a hair-sized bump... It is known as the smoothest man-made structure in the universe, and it is also the smoothest. A good light reflector part..."

Hu Lai nodded, and made a note in his heart, Cai Si from country D.

(End of this chapter)