Manufacturing Empire in the Valley

Chapter 167 Tackling Two Projects
Fang Dongping was stunned for a moment, the expression on his face changed a few times, and then he shook his head slightly: "Isn't it possible? I've already left Factory 311 now, can he do this wicked trick to me? I reckon it might be a hydropower station." It was caused by power cut measures."

A medium-sized hydropower station was built more than [-] kilometers upstream of Aoshan Town, and all the electricity in Aoshan Town was provided by this hydropower station.Since Niujia Village is relatively close to the town, it also gained fame and became the first mountain village in Shili Baxiang to be connected to electricity.

However, the electricity in Niujia Village is connected to Factory 311, and then to the Cave Factory. Once the power supply is cut off at Factory 311, not only Niujia Village will have a power outage, but the Cave Factory will also be cut off.

The phenomenon of power shortage in China is still very serious in this era. In order to ensure the normal progress of production work, the power of power plants will generally be supplied to those key units first, and then the second-level or benefited units will be considered last. Supply electricity to residents.

When the benefits of Plant 311 are relatively good, the upstream hydropower station will naturally provide full power.But as the benefits got worse and worse, Factory 311 gradually faded out of the list of key enterprises, and later even the next-level units were not included.Up to now, it has been reduced to the embarrassing situation where grandma doesn't care and asks uncle to ignore it. Power outages are a frequent occurrence.

After hearing Fang Dongping's words, Niu Xiaoqiang also became a little uncertain.He thought for a while, and then said: "How about we wait and see, if the power outage at the hydropower station is estimated to not be too long, the call will come within ten hours at most, if it is caused by Chen Tianhou, That……"

Niu Xiaoqiang was a bit stuck when he said this. To be honest, if Chen Tianhou was really responsible, he would have nothing to do.

Fang Dongping hummed: "Let's wait and see, I hope it's not what you think, otherwise it won't be easy."

After Fang Dongping finished speaking, he looked at the wooden boxes stacked in the air-raid shelter, his face was full of worry.

Factory Manager Zhang's approval note clearly stipulates that the delivery date is three months, which is already a huge grace period.According to the normal delivery time, it should not exceed one month, because large enterprises have to settle accounts at the end of each month, and it is difficult for others to make accounts if it is delayed for too long.

"Forget it, let's not think about it, let's do what we can do first, Xiaoqiang, you go to read the information on technological innovation first, and then I will make a total with you after breakfast, and see which technology to tackle key problems More appropriate."

"Good master."

The file bag was placed next to the kerosene lamp. Niu Xiaoqiang opened the bag and sat under the lamp to check the documents.

The petroleum industry involves a wide range of areas, from oil production equipment to refined oil refining, there are hundreds of large technical categories alone, and tens of thousands of small technical categories.Director Zhang knew that Fang Dongping had a lot of research on mechanical engineering, so most of the information he provided was related to this aspect.

Niu Xiaoqiang learned a lot from Fang Dongping. His attainments in mechanical manufacturing are stronger than most researchers, and what he lacks is only practical operation experience and experimental links.But even so, when he saw the information provided by Director Zhang, he couldn't help feeling a sea of ​​complexity.

According to Fang Dongping, the two of them only need to pick out a relatively good technology to tackle key problems before they can compete. Therefore, Niu Xiaoqiang first needs to screen these materials.He shook his head, calmed down his heart completely, and started the screening work.

After an unknown amount of time, Fang Dongping's voice sounded again: "Have you chosen yet?"

Niu Xiaoqiang was so fascinated, he subconsciously let out an ah, turned around and said, "Master, have you finished your breakfast yet?"

Fang Dongping nodded, and sat down on the empty seat beside him: "I briefly read these materials last night, and even I thought it was too complicated, so you probably won't feel relaxed, right?"

Niu Xiaoqiang nodded with a wry smile: "You're right. After reading it for a long time, I only got a general idea. As for which one to choose, I still need to conduct an in-depth analysis."

Fang Dongping lit a cigarette, took a puff, found four pages of documents from the pile of documents, and handed them to Niu Xiaoqiang: "Anyway, your future development direction is not here, and we don't need to make it so complicated. This is what I sketched out last night. Take a closer look at the selected projects, let's pick one from here."

Niu Xiaoqiang hummed and studied carefully.

After about a quarter of an hour, he handed one of the pages to Fang Dongping: "Master, I think this project is relatively easy."

Fang Dongping looked down and saw the title "Efficiency Improvement and Cost Saving in Oil Refining Process" written on the top of the page.He couldn't help being stunned for a moment, then smiled and said, "I didn't expect you to choose this project."

The efficiency improvement and cost saving of the refining process are more related to the knowledge category of overall planning, and are not so closely related to mechanical engineering.Niu Xiaoqiang chose this project mainly because it is relatively easy to get started, and it is not as complicated as the improvement of mechanical equipment, which can greatly save time.

He asked curiously, "Master, which project did you prefer?"

Fang Dongping pointed to another page: "This is what I like."

Niu Xiaoqiang took a closer look and found that the title written on this page was "Innovation in Oil Extractor Fault Repair Technology".

The oil extraction machine is commonly known as the "kowtow machine". When it is working, the head of the machine keeps moving up and down, which is very similar to the kowtow action.Because the oil extraction machine looks like a donkey's head, it is also called "donkey head machine".

Its structure seems simple, but it has relatively high requirements for machining technology, especially the two aspects of durability and corrosion resistance, which are the key points to measure the quality of donkey head machine.

Since the donkey head machine has relatively high requirements on processing technology, it is not so easy to repair once it breaks down.In order to ensure the efficiency of oil production operations, the oil production team generally adopts the method of replacing the faulty parts as a whole to repair, which will inevitably lead to waste of resources.In Fang Dongping's view, there is great potential in this aspect.

Niu Xiaoqiang nodded slightly: "Although you have not set foot in the field of petrochemical machinery, the working principles of many mechanical equipment are the same. As long as you study it in depth, it should not be difficult to come up with an improvement plan."

When he said this, he looked at the plan he had chosen, and said with a smile: "The project I chose is relatively simple, and I personally think it is not too difficult to achieve results. Director Zhang will definitely be more satisfied with the two results, and the relationship between us and him will go further, right?"

　Thank you book friend "563535345" for your support!bow!
　　
　
(End of this chapter)