God-level industrial master

Chapter 139 Let's Give It a Try

Is there something wrong?

As soon as this idea popped up in their hearts, the technicians quietly looked at each other and exchanged glances.

One of them was a technician in charge. He took a few steps forward and said in unproficient English: "What's the matter, what's the problem?"

The people from Siemens seemed very angry, and spoke a lot in English with a little excitement, and the speed of speech was relatively fast. The technicians in the Red Star Factory couldn't understand them at all, but they could guess that the product in front of them should be released. question.

This is an accessory on the DJ4 electric locomotive. What the workers are welding is the electrical control cabinet. The cabinet is made of stainless steel. After the stainless steel plate is cut, it is welded by the workers of the Red Star Factory.

Shaoshan series electric locomotives also have control cabinets.The control cabinet of the electric locomotive is one of the important parts, and it can be regarded as one of the cores of the electric locomotive. It will also be equipped with a large number of electrical components.

The electrical cabinet in front of me is just a cabinet without electrical components. The key electrical components to be assembled inside are directly supplied by Siemens. In the final assembly workshop of the Red Star Factory, engineers and technicians from Siemens will be responsible for guiding the assembly.

It's just a cabinet. To put it bluntly, it is equivalent to a shell. There are no electrical components in it. How can there be any problems?

One of the technicians of the Red Star Factory looked around the cabinet for a long time, but didn't see any tricks, so he couldn't help but looked suspiciously at the Siemens people several times.

As for the people from Siemens, they seemed to be even more excited, and chattered a lot. Unfortunately, there are very few people in Red Star Factory who really understand English and can speak fluent English.

This time, in order to cooperate with the cooperative manufacturing work, Red Star Factory hired several full-time translators from outside, but it is still impossible to have translators next to every Siemens employee, except for the two people in front of them.

I couldn't understand what they said, so I had no choice but to call the translator over. After the translation, the technicians of the Red Star Factory finally knew what was going on.

It turned out to be a welding defect.

The people from Siemens found that the welding quality of this stainless steel cabinet was relatively poor, and there were several obvious defects in it, and the slag inclusion phenomenon in one place was quite serious.

That's what happened.

The few technicians in the Red Star Factory finally knew the reason, but they basically didn't take it seriously. In this era, the strict quality concept is far from as strong as it is now.

One of the technicians said lightly: "Such small defects are fine. Our Shaoshan series electric locomotives also have similar electrical control cabinets. We generally accept such small problems during welding."

what!
After the translation, the people from Siemens became angry. In their eyes, quality is life and is paramount, and any defects cannot be ignored.

One of the Siemens technicians dug out the electrical cabinet welding process specification, which is in English and the original version of the Siemens company process specification.

He pointed to this process specification and said very seriously: "Any defect is not allowed. This electrical cabinet is unqualified and must be reworked. If the rework still fails to meet our requirements, this cabinet must be scrapped."

what!
so serious!

The technicians of the Red Star factory felt a little uncomfortable. We have always done this before. There is no problem when such an electrical cabinet is installed on our Shaoshan series electric locomotives. Such a small defect on the DJ4 electric locomotive is completely Not a problem either.

The two sides disagreed and almost clashed.This matter quickly spread to Xie Zhenhua, and then to Chang Jinlin.

Realizing the seriousness of the matter, Chang Jinlin quickly called Xie Zhenhua over, and asked seriously: "Old Xie, you should have heard about it."

"Yeah." Xie Zhenhua nodded, "I heard that there was a dispute between us and people from Siemens, and there was almost a conflict."

Chang Jinlin said: "This matter shouldn't be, the fault lies with us."

Xie Zhenhua agreed: "Yes, this cooperation has taught us a profound lesson. We used to be too extensive and did not pay enough attention to quality. Siemens has taught us a lesson."

"Old Xie, what shall we do?"

Xie Zhenhua said: "Take this as a lesson and strengthen the quality awareness training of our engineering and technical personnel. We will produce high-quality products in the future instead of being so extensive."

"Yes." Chang Jinlin agrees with this point. Everyone's quality awareness really needs to be improved, and the cooperation with Siemens has increasingly discovered the huge gap in quality between the two parties.

But Chang Jinlin was a little worried. With such strict quality requirements, can the electrical cabinet be welded to pass, and can the people of Siemens be satisfied?

Xie Zhenhua also seemed to see Chang Jinlin's worries, and said slowly: "Mr. Chang, you are worried that the quality requirements are too high, and the electrical control cabinets we welded cannot meet the requirements of Siemens, which will lead to scrapping one after another, right? "

"Yeah." Chang Jinlin nodded lightly.

A contract was signed between Hongxing Factory and Siemens AG to formally cooperate, and Siemens AG will guide Hongxing Factory in the production and manufacture of AC electric locomotives.

In terms of manufacturing process, it completely follows the version of Siemens Company, and in terms of quality requirements, it also fully follows the requirements of Siemens Company.

Siemens has high requirements. In the mid-to-late 90s, when quality awareness was generally weak, many people could not even understand why there was such a high quality requirement. Why did it have to be reworked or even scrapped if there was a small defect that did not affect the use? Woolen cloth.

Many workers in the Red Star factory have been used to it extensively, and they can't understand it, and they can't understand such quality requirements psychologically. It is very difficult to weld products with strict quality requirements.

Xie Zhenhua said: "Let's try it first, if it really doesn't work, we'll find a way."

This is the only way to do it, try to do it first, if the first one doesn’t work, then do the second one, if the second one doesn’t work, then do the third one, until you pass it.

Jiuzhou Industrial Co., Ltd.

Tang Fei also has a lot of things recently, mainly due to the completion and commissioning of two new factory buildings, and the production area has been doubled, and the production site has been adjusted appropriately.

The No. 1 workshop was adjusted to a welding workshop, engaged in professional welding, currently mainly welding aluminum alloys, and making interior panels for Hongxing Factory.

However, such a large area is simply not needed for interior decoration panels. An area of ​​1 to 2000 square meters is enough, while the area of ​​No. [-] factory building is more than [-] square meters.

Tang Fei mainly considered from a long-term perspective. If he can't use such a large area now, it doesn't mean he won't need it in the future.In the future, the welding scale of aluminum alloy can be expanded, and some carbon steel parts can also be welded, such as stainless steel welding.

The No. 2 workshop is mainly a mechanical processing workshop, which processes some important and critical parts on the motor, such as stamping of silicon steel sheets, processing of motor spindles, etc.The stamping of terminal blocks was also moved into No. 2 workshop.

Plant No. 3 used to have the largest area, more than 3000 square meters, but now it is mainly an assembly plant for motors.

Mainly used for the assembly of micro motors, such as computer power fan motors, CUP motors, motherboard motors and so on.

The newly built two workshops are high-grade, large in size and good in environment. They are mainly used for the assembly of various motors, such as the assembly of electric bicycle motors, the assembly of main cooling motors, and the assembly of traction motors.

One of the workshops is used for the assembly of electric bicycle motors, and the other must be used for the assembly of electric locomotive motors, such as the current main cooling motor and the traction motor that will be made.

Tang Fei walked around his various factories, took a look, and thought in his heart that the area is enough for the time being, and two new factories are under construction. When these two factories are completed, the production site will be wider and more spacious. rich.

At that time, the traction motors of electric locomotives will have a separate large factory building dedicated to traction motors. Of course, there may be other motor products at that time.

After looking around, Tang Fei passed by the gate of Factory No. 1 when he was about to go back to the office, and looked in from the gate.

Good guy, at least two-thirds of the area is vacant, and the welding of the interior panels only takes up about five or six hundred square meters. At least two thousand square meters of this factory building are temporarily idle.

Well, it seems that I have to go to the Red Star Factory and do some welding business before I come back. Aluminum alloy welding can also be done, and stainless steel welding can also be done.

While thinking this way, he walked towards the office building.

Just as he was about to enter his office, a voice sounded from behind, "Boss, something happened to Red Star Factory!"

Hearing this, Tang Fei stopped involuntarily, looked at Yang Chenglin walking towards him, and quickly asked, "What happened to the Red Star Factory?"

Yang Chenglin is the marketing director of Jiuzhou Industrial Co., Ltd., responsible for market development. He performed very well and won a lot of orders for Tang Fei.

In Yang Chenglin's work, in addition to keeping in close contact with foreign customers such as Ian Donnelly, Britt and John, he also has frequent visits with relevant personnel of the Red Star Factory. Some things about the Red Star Factory may not be known to Tang Fei , but Yang Chenglin definitely knows.

At present, the Red Star Factory is the largest and the most important thing is to cooperate with Siemens and start to try the production of DJ4 electric locomotives.

Yang Chenglin came over and told Tang Fei, "Boss, I heard that Siemens has very high quality requirements, almost to the point of harshness. Many parts of the DJ4 that were trial-produced by Red Star Factory were made one after another, but many were scrapped. Few are qualified, and the most terrible thing is the welding of the electrical control cabinet, which is always unqualified and has not been able to meet the requirements of Siemens, and the welders in the Red Star Factory have already complained. "

As a reborn person, Tang Fei knew that it wasn't that they were demanding on quality, but that the Red Star Factory was used to being extensive, and now they were suddenly in line with international standards, and suddenly raised the quality to such a high level, they were seriously uncomfortable.

Perhaps after this unadaptive period, the quality awareness of the employees of Red Star Factory will gradually improve, and the product quality will also gradually improve. This may be a good thing for Red Star Factory.

Has their electrical control cabinet welding been unqualified?
Hearing what Yang Chenglin said, Tang Fei's heart suddenly moved, and he blurted out: "Their welding is unqualified, so let us try it!"

Tang Fei knew that a huge opportunity had come unknowingly. It came so suddenly that Tang Fei was almost unprepared.

After realizing that this was a huge opportunity, Tang Fei felt as if he was instantly enveloped by a huge surprise.

.........

Today is the third update, and the second update will be delivered!

(End of this chapter)