Return to the exciting era of 1999

Chapter 287 The Uncontrollable Factory

Ji Donglai was in charge of pushing the carts, and Li Baoping didn't talk too much, but inspected each size of the processed parts step by step, and both of them detected the places marked on the drawings.

Because the inspection was done in the reverse order of processing, Ji Donglai's last step was to inspect the primary processing of the pump body. At this point, Ji Donglai's eyeballs almost fell off.

The workers in the workshop almost drove the ordinary lathe away, and the iron filings on the cast iron pump body fell like snowflakes. The workers' operation was so fast.

According to the requirements of the process design card, the other party needs to follow up with three knives gradually, and the amount of each knives should not be too large. As a result, the workshop workers directly put in place with one knife, and the rest is handed over to the finishing CNC machine tool.

When processing a basket of products, the workers will sit on the chairs in front of them and rest for 10 to [-] minutes, then get on the car again and continue driving at high speed.

"Master Li, isn't this speed a bit fast?"

Seeing that the workers did not carry out the processing process according to the process card, Ji Donglai subconsciously looked at Li Baoping, who was testing the damping hole, and raised his head in surprise when he heard Ji Donglai say this.

"Can you understand the processing drawings?"

Putting down the pump body in his hand, Li Baoping glanced left and right, put the car in the designated area, and took Ji Donglai into the lounge.

"Well, there are relatives in my family who work in factories. I grew up with them, so I know a little bit!"

Holding the blueprint process card, Ji Donglai looked at the various processing processes of a pump body on site from front to back, and finally found that the workers on site violated more than one, and strictly speaking, almost none of them complied.

According to the requirements of the process card, two machine tools are used to process the seam and inner cavity of the pump body, and tooling and fixtures are required in the second step.During the on-site processing, the workers in the workshop now finish the work directly on a lathe, and there is no alignment on the tooling at all, which means that the concentricity on the side of the seam is lost.

Even if there is alignment in the later finishing process, there will be a risk of a certain side wall thickness of the pump body being out of tolerance, which is absolutely not allowed in industrial processing.

As for the high-pressure pump bodies, the surface is processed and the interior is milled. Now they have not been equipped with tooling as required, which is very abnormal.

At the very least, the concentricity of the bearing cannot be guaranteed. It is no problem if you encounter a master craftsman. If you are negligent, the quality of this product will almost freeze.

"Remember to talk less, watch more, and listen more here! I really think it's not good here, remember not to stay here, look at the people in the workshop, they all have to stay here, really Those who are capable will not choose to stay here!"

"Besides, the boss doesn't rely on this to make money, do you know? The boss now hopes that the processing plant will be ruined, and then these old employees will resign, so he can sell this piece of land, understand?"

"Can't we see what you can see? You will know when you go to the pump body finished product workshop. There are also our quality inspectors over there. They are also inspecting. Can't they detect this kind of defect? ​​It can, But everyone has reached a tacit agreement, no one cares!"

"You are someone who will enter the technical department in the future. Don't compete with the people in the workshop. Don't tell anyone what you said today? It's easy to be caught by someone with a heart. This factory is much bigger than what you see. The water is much deeper!"

After unscrewing the plastic water cup, Li Baoping took a sip of water, Ji Donglai couldn't help being startled, and secretly thought that he had come to the right place.

He quickly took out a small bag of tea from his pocket and gave it directly to Li Baoping. The supplier gave it to Ji Donglai, and Ji Donglai gave it all to Li Baoping this time.

The other party was very helpful, and then began to give Ji Donglai a popular science about the past and present of this factory.

It has been 20 years since Li Baoping started his internship in this factory. The processing factory was originally profitable. Even in the economic crisis, the factory is still able to maintain a balance of income and expenditure.

It was the other two companies that lost money, including the foundry, which turned out to be just in time for the privatization of state-owned enterprises.

In order to privatize these properties, Zhang Qinglu and the leaders of several other factories transferred all the debts to Jichuan Pump Industry, and then split the company completely.

The rest of the bosses were debt-free and bought the factory to other places for production and processing at a small price. Zhang Qinglu naturally obtained the trademark and land use rights of Jichuan Pump Industry.

According to the agreement, the severance pay for each worker in the factory was [-] plus. Zhang Qinglu wanted to pay less, but the workers never agreed. After all, it was a lot of money.

The number of workers on the account is 300, and Zhang Qinglu has to pay at least 3000 million for all compensation.

Now that the value of the land in the factory seems to be rising, Zhang Qinglu is anxious, so he keeps hiring new general managers to negotiate with the workers, but with little success.

Zhang Qinglu then changed his strategy, relying on time!
Some elderly people in the factory have underlying diseases. After the factory was privatized, the heating was owned by the heating company. The heating was not good, and the workers were very cold in winter.

In summer, almost all the electric fans in the company's workshop are broken. Even if they can blow, they can't achieve much cooling effect.

In this way, the old workers couldn't take it anymore and had to resign.

How can there be any compensation for resignation since ancient times?Dismantling and dismissing factories are two concepts, and many people have to do this as a last resort.

Last year, Zhang Qinglu again did not know where he came up with the bad idea. The whole factory adopts the piecework model for the upper and lower parts. Take today's pump body, the price of processing is two yuan.

Every process is priced, so the factory is almost insane.The follow-up process is the end of the previous process, and the price is very low. In order to earn more income, the later workers even come to the lathe workshop to urge them.

Unreasonable implementation of processing technology will inevitably lead to a rapid decline in product quality. Now the product quality of the entire factory can no longer be described as poor.

The best way to destroy the factory is to destroy this brand. Originally, the steering pump and oil pump of Jichuan Pump Industry were the designated products of the local BAIC. Now the market share is getting lower and lower, and it will return to zero in a few years. .

At that time, the workers could only accept the fact that the factory went bankrupt, and the land was auctioned off as a matter of course. Zhang Qinglu is now using the factory's continuous loans. As for the flow of funds, who knows.

The outside world now knows only one thing, the quality of the products in this factory can no longer be controlled.

Of course, Zhang Qinglu is still thinking about one thing: sell the product, and then transfer the money out after international lawsuits and compensation.

The last conclusion was analyzed by Ji Donglai himself, not by Li Baoping.

Combined with Li Baoping's explanation to Ji Donglai, and Zhang Qinglu seeking Ji Donglai's help to sell such poor quality products to foreign countries, and looking for his own memory, this conclusion is almost instant.

(End of this chapter)