Return to the exciting era of 1999

Chapter 837
"I haven't worked in such a good environment for many years. There are no restrictions. I really miss the feeling of those days!"

With his hands behind his back, Da Qizi walked with Ji Donglai from one end of the factory building to the other.

The huge factory building is 14 meters high, and there is an old-fashioned crane on it, which has a natural advantage when unloading the truck.

The construction of the furnace foundation was accelerated through the efforts of the workers. The mixing station transferred from Tashkent was under construction around the clock, and the steel bars imported from China did not need to be filled in.

The aluminum block mold is easy to make, and it is already on the way after being opened in China. For the rest of the small parts and the large-scale equipment base casting required for the synthetic ammonia project, Da Qizi recommends that all be made locally, which is one word: cheap.

"Master Qi, I will completely leave this to you. You have worked with the former Soviet Union and understand the dog temper of these people. If you can handle it well, I will rely on you for the food."

"You have a stable personality, and they will like you. In addition, I asked someone to drill a well locally. The land over there is ours. When you are free, you can grow some domestic vegetables. If you can sell them, you will earn income. If you can't sell them, you will be yourself." eat."

"I've been here for a long time. The biggest limitation here is that there are no vegetables. Except for Piyazi, it's Kaledoshika. You can eat any tomato. After a long time, you will get tired of it. I will give you full autonomy here. I have also met some Chinese people locally, if I can get an order from them, I will also give you a commission..."

While keeping the order steady, Ji Donglai didn't expect the order to make him much money.

The next step is to get closer to Chevrolet. The steering pump and oil pump have successfully entered Chevrolet. If the casting side can still enter, it means that you are really stable.

Da Qizi himself is a technical background, coupled with his steady personality that is equivalent to an elephant, he is extremely trustworthy wherever he is placed.

The initial list of scrap aluminum contacted by Xin Li showed that there were not many of them, but when the goods were inspected, Ji Donglai and everyone were confused.

"It's all ours?"

Pointing at the pressed aluminum blocks of fifteen carriages, Ji Donglai and Da Qizi were a little dazed.

"It's all yours. There are so many next month. We are all talking about selling."

"Fuck!"

"peat!"

"There are beans!"

"This is not enough to eat, I can choke to death!"

Seeing such a big car, Ji Donglai spread his hands at Da Qizi, but Da Oolong didn't say anything, and took out his phone to shake him for luck.The transfer of large aluminum blocks is definitely not as simple as it is said. Ji Donglai seriously doubts that this thing will fall apart halfway through the old tractor.

The driver who drove the car looked like a drunkard, everything you said was OK, and the location was a big oolong, and he wanted to leave there. Fortunately, the worker's reaction speed was fast enough, otherwise the car would not necessarily go anywhere. up.

The pressed aluminum block of a train is less than [-] tons, and it is just right for two large tractors to transport it.Behind it is a local Kamaz truck, which is still an old-fashioned product. Only now does Ji Donglai know that such old equipment still exists in this world.

All the aluminum blocks were piled up next to the furnace like big radishes, and the orderly local workers began to speed up the progress unconsciously.

Roller machines from China began to clear customs along the Khorgos port. This time, Xin Li chose to ship the goods from LYG, which saved a lot of money in the whole freight.

This time, in addition to the imported waste pressed aluminum blocks, Ji Donglai also imported a lot of aluminum plates. The overall price is much cheaper than imports from other countries.

The aluminum ingots are imported from Russia by Da Qizi, and they are all standard aluminum bars.

"Mr. Ji, the process here is actually not difficult. From here, the aluminum strip is rolled into an aluminum plate, and then I cut it here, then round it, and then we perform three-step stretching..."

Don't look at a simple non-stick pan, the process looks uncomplicated, but it is very cumbersome.

From the smelting of waste aluminum blocks to aluminum strips, the next step is to directly enter the roller machine for rolling and pressing to form aluminum plates of fixed thickness, then cut into small aluminum plates by cutting machines, and then cut into fixed circular plates in the next step.

Then two-step stretching is carried out on the stretching machine, and this step is directly flanging.

Then the overall surface is sprayed with Teflon, and the next step is to use the waste heat of the furnace to cure the Teflon surface.Because it is gas heated, the bottom of the non-stick pan will eventually have to be decoated.

The handle mounting hole on the side of the stamping pot is very simple, fixed machine position, with foot switch.

The stainless steel handle is simpler. The stainless steel rod imported from China is burnt red in the furnace. The next step is to put it into the mold, step down, and the bending and handle punching are all formed.

Occasionally, there are substandard products, and the workers are too lazy to repair them, and they are directly thrown in the corner to wait for the furnace to be refined and then reprocessed again.

The injection molding workshop of the high-temperature-resistant plastic handle is next to the casting workshop. The mold with 48 cavities is very huge, all of which are imported from China.

Making a product once is enough for three months of assembly here.

Every time the mold is preheated directly next to the furnace, Da Qizi makes the best use of energy.

For the rubber parts workshop, Ji Donglai considered again and again, and imported from China, the production cost is really a bit high.

"Boss, here is a boss looking for you."

The workshop machinery and equipment were in place one after another, and Da Qizi and Da Oolong were very busy every day. Only Ji Donglai could sit in the office and drink tea, and Li Xiaojuan, as Ji Donglai's queen translator, was very busy on the side.

The guard introduced a person to Ji Donglai, and he didn't take off his mask until the guard left.

"Mueller, what are you doing like this? My dear, sit down!"

The person who came was Muller, the Purchasing Manager of Uzi Daewoo Motors. Ji Donglai's steering pump and oil pump were brought in by the other party, and now he has seen the benefits.

"Mr. Ji, I'm sorry, the management is strict now. I'm bringing you good news. Our company's Chevrolet car steering parts were originally supplied by a local foundry company. Didn't Uzi Daewoo go bankrupt in the previous stage?" .”

"The company went bankrupt. We took some measures. Someone bought the operating rights of the company, but the company couldn't produce it. We purchased the corresponding parts from Russia and sold them to Chevrolet."

"But the price is very expensive. I heard from your workers that you can also do casting. I want to ask if you can do it? If you can do it, we can cooperate..."

Muller has inherited the genes of all outstanding talents in Uzbekistan, and his words have always been so oblique.

Ji Donglai listened to Li Xiaojuan's translation for a while before he realized that the general idea was that the last company that supplied Uzi Daewoo with auto casting parts was actually Huang Liao, the former axle company.

(End of this chapter)