My black technology will move by itself

Chapter 127 Technical points suitable for doing bad things

'This kind of control system should be able to sell to make money, right? '

Lin Yun looked at Yang Fengyun's tearful appearance, and asked himself feeling his conscience.

Xiaozhi: [Networked control is required, this is an important flaw, otherwise high precision cannot be guaranteed! 】

In terms of specific operations, Xiaozhi has a great say.

'That's not bad, then you can see who can talk about patent licensing. '

How much is a piece of meat, of course Lin Yun can't let it go.

"Mr. Yang, the CNC system you mentioned, I have never used other companies, so the ones on these five axes are packaged with other ideas, and there are some relevant documents next to it, otherwise, you can first see if it is suitable for use?"

Before Lin Yun finished speaking, Yang Fengyun and the engineers who followed him divided the thin stack of materials into pieces.

"Young and promising, young and promising!"

Secretary Wu didn't join in the fun, looked around Lin Yun, and praised him sincerely.

"I'm overwhelmed, the difference is actually quite a bit. But as far as these five axes are concerned, they can be used if they can be used, and the effects and performance are also passable, but the manufacturing materials are not up to standard, and the wear rate will be higher."

Shaking his head, Lin Yun said modestly.

"What does that matter, now that we have it, we can be very rich after that."

He didn't care about this, and what Lin Yun said was not a shortcoming at all in the eyes of Secretary Wu.

On the other side, Yang Fengyun also led his engineers to start the domestically-made five-axis in front of him step by step according to the manual, and prepared to make a few S-shaped prototypes to confirm the accuracy of the machine tool.

As an ISO standard, although the S-type test piece is rotten, it is difficult to say what effect it will have in actual production, but it is very qualified as an inspection of the accuracy of machine tools.

So from easy to difficult, American NAS parts, German S parts, and Chengfei S parts, which Yang Fengyun is proud of, were freshly baked from the machine tool one by one.

In fact, it's not that much, but Yang Fengyun couldn't bear the excitement in his heart.

Originally, I thought that this trip was just to ask for some resources, but I didn't expect that the mountain that was pressing on my heart would be overthrown in an instant.

There were still some hot trial parts sinking in Yang Fengyun's hands, but they didn't arouse his reaction at all. The elderly chief engineer rubbed back and forth on the precise mechanical cutting surface, and didn't even let go when the skin was scratched by the sharp edges and corners.

"You, how did you do this?"

Unbelievable, Yang Fengyun saw the potential of the CNC system on the five-axis.

But thinking about it, he didn't understand the operating logic in the system.

"...Think about how to do it first, and then make it."

What else could Lin Yun say, asking Xiaozhi to give the result as soon as he slapped his head?
This can't work!

"Yes, can you sell us a few, and the CNC system..."

The old man blushed, Yang Fengyun was completely convinced, and now he only thought about where he would show his talents after he got it.

The industrial mother machine of the five-axis linkage CNC machine tool is definitely a big killer that can enhance the country's industrial heritage.

"What are you talking about with me? You have to find me, Sister Yu, or Lao Liu!"

Smiling, Lin Yun continued.

"And these five-axis are not as good as you think, this is the need to connect to the terminal server to improve performance control."

However, Yang Fengyun, who heard this, turned a deaf ear to it, because as far as the industrial control system is concerned, the computer on the equipment alone can barely meet the general needs.

For high-performance settings, of course, it is necessary to use a terminal server to enhance performance.

Just from the perspective of Lin Yun's five axes, it seems that he did not work independently.

But these are small issues.

With a red face, Yang Fengyun grabbed Liu Daoshun, an old subordinate, and opened his mouth like a lion.

Don't care about these management matters.

Lin Yun pulled Yu Shuang and Secretary Wu to talk about the sale.

"This, this has to be discussed in a meeting."

He was a little hesitant, and just as Secretary Wu understood Lin Yun's request for equipment to be connected to the Internet, his heart beat violently a few times.

Finally, it was their turn to have a chance to play tricks!
"So the basis for the five-axis linkage CNC machine tool to be replicated is partly due to the supercomputer room built before?"

Yu Shuang grasped the key.

Before, Yu Shuang thought Lin Yun was just joking.

Because in terms of the various technologies and architectures of purchasing supercomputing components, not to mention comparing with the world's top level ARM supercomputing, even the domestic Tianhe-[-] and TaihuLight are afraid that there is a big gap.

Costs are costs, and secrecy is secrecy.

Using general-purpose devices, the effect that can be achieved is not as prominent as the power of the whole country.

"The performance of Lingyun Supercomputing is not bad, and it must be matched to the Internet to form a computing cloud platform. There must be no pressure."

Lin Yun gave an affirmative answer from a professional perspective.

"But if you want to export and dump, I'm afraid you still have to suffer a lot."

Secretary Wu felt a little melancholy.

In the field of high-end machine tools, catching up is catching up now, but it is impossible to sit back and relax. The most is a worldwide price war and barely making a profit.

But the current situation is much better than when it broke through before, and it didn't cost too much money. In the past, it was really...

"Not to mention anything else, in terms of CNC system, the level of foreign countries can't keep up with mine, especially after sharing data online."

Lin Yun is very confident.

"Why, do you have to share data online?"

Secretary Wu asked cautiously.

"That is another important technical node. It is mainly to use the power of supercomputing to build a platform. At that time, both in scientific research and production, the efficiency and yield can be significantly improved!"

This is not Lin Yun's nonsense, but a comparison after actual experiments.

What are the few S-shaped test pieces that Yang Feng manipulated just now? Lin Yun made them in the past few days, and there are still many scrapped five-axis semi-finished products.

Basically, these scraps are all because the performance of the offline server is not enough, so the high precision of the machine tool cannot fully exert all the performance.

In other words, if you want efficiency and yield, you must pay for it.

It's just a simple and easy requirement to access the supercomputing platform, and not all industrial production needs to be kept secret.

The market will teach them to be human.

"Is that so..."

With his eyes flickering, Secretary Wu considered the gains and losses.

"Will the data after being connected to the Internet be detected by foreign users?"

Of course, Secretary Wu wanted to make the best use of everything.

High-precision machine tools are not needed. When they are used, the value of the data that can be obtained can be high or low. Secretary Wu naturally doesn't want to make mistakes.

"I shot, you understand."

Lin Yun understood, and returned a look of understanding.

"well!"

In a hurry, Secretary Wu took the time to do research and write a report.

"Why do I feel that you are doing something bad?"

In Yu Shuang's mind, the recent scandal between the "AIA" and its godfather appeared in Yu Shuang's mind.

Strongly related, it is the five-axis linkage CNC machine tool.

(End of this chapter)