Before being reborn and returning to the city, he flirted with a crazy loyal dog and a rough guy to

An hour later, Mr. Song took Gu Xia to Chengfeng Machinery Factory, which is also the largest and most technologically advanced machinery manufacturing factory in the provincial capital.

The Dongfeng brand tractor produced by their machinery factory has always been the leader in the country in terms of technology and sales, and the cost is also the lowest.

It can be said that Chengfeng Machinery Factory has the status of the big brother among the machinery factories across the country.

Because of Mr. Song's identity and knowledge, he was hired as a special technical consultant by Chengfeng Machinery Factory. Although he had no real power in the factory, his status and voice were not low. The factory director had to give him three points of respect.

Today he brought Gu Xia to the workshop of the machinery factory and let Gu Xia read and touch whatever he wanted. Even if the workshop director had an opinion, he didn't dare to speak out and kept smiling.

Director Tang looked at Gu Xia, who was even more beautiful than the female stars on the calendar, and really didn't understand what this beautiful lady was doing in the car.

What’s even more outrageous is that they have to touch machine tools.

If she does not operate it properly and breaks the machine tool, not to mention delaying their work, if she gets injured again, then whose responsibility is it? !
  Director Tang was full of vigilance and disgust, and asked Gu Xia with a smile on his face, "Comrade Gu, which area do you want to visit first?"

Gu Xia pretended not to understand Director Tang's thoughts and said with a smile, "Director, I understand mechanical manufacturing."

"Comrade Gu is young and promising." Director Tang praised him, but he laughed in his heart.

Gu Xia didn't say anything more. Seeing that Mr. Song wanted to test her, he ignored her and walked straight to the workshop.

Director Tang hurriedly followed him and saw Gu Xia smiled at a young man in the workshop and asked politely if he could touch the machine tool.

The young man giddily agreed.

Director Tang,...

When I see a beautiful woman, I lose my mind!
  The production rules that he always reminded and ordered were all given to dogs.

pissed him off!

Director Tang glared at the red-faced young man angrily, and hurriedly said to Gu Xia who was running the machine tool,

"Comrade Gu, please don't..."

But the next moment, Director Tang's eyes widened in surprise, as if he had seen a ghost.

Gu Xia was seen holding tools and dismantling the parts of the machine tool very skillfully. He was also talking about how to repair the parts because they were aging.

Director Tang is extremely anxious, aren't you acting recklessly?

He was about to rush forward, thinking that he would pull Gu Xia away even with brute force, but Mr. Song stopped him and said,
  "If she breaks it, I'll be responsible."

Director Tang looked at Mr. Song, then at Gu Xia, and sighed inwardly. He did not stop him anymore, but stared at Gu Xia's destruction with wide eyes.

He wanted to see if she really understood.

Seeing this, Director Tang became more and more surprised.

This beautiful lesbian seems to really understand and is not messing around. Moreover, the more he watches, the more he feels that she is more skilled at dismantling machine tools than he is!
  impossible!
  Must be wrong.

Director Tang took off his glasses and wiped them, continued reading, and after a while wiped his glasses again.

It seems that I read it correctly...

Director Tang thinks this is a bit outrageous. He has been dealing with machine tools for most of his life, but he can't compare to a beautiful girl?

Director Tang would rather he was wrong!

Mr. Song is no longer calm.

Gu Xia is completely skilled in operation and does not look like a novice at all.

But she said she had never been in contact with it.

There is no need to lie to yourself.

After Gu Xia disassembled, repaired, cleaned and installed the machine tool, she ran it for a while and said to Director Tang and Mr. Song with dissatisfaction,

"Some parts are seriously aging. If they are not replaced, the yield can only be increased by [-]%. However, the problem of defective products should also be reduced, and perhaps they can be reused."

Director Tang opened his mouth, not knowing what to say or what he could say for a moment.

He wanted to question him, but he had seen what he had done just now, so he had no face to question him.     There are people outside the world, and there is heaven outside the sky.

"Xiao Xia, is this really your first time touching a machine tool?" Mr. Song was still in a daze.

"Yes." Gu Xia reminded kindly, "I learn things a bit quickly. Don't be surprised, Grandpa Song. You will get used to it gradually."

Director Tang resisted the urge to pick out his ears.

This girl's family must be really crazy when talking.

But then, Director Tang saw the crazier side of Gu Xia.

She spent three hours repairing all the machine tools in their three workshops.

It's all!
  Director Tang was numb when he saw the back.

After testing the yield rate of the machine tool, Director Tang's eyes turned red with excitement, and he tried hard to hold back tears.

After repairing the machine tools in the workshop, the yield rate of the lowest machine tools has increased by [-]%. What is outrageous is that the yield rate of the new machine tools they just introduced the year before last has actually increased five times!
  I'm sorry that they used these high-end new machine tools in the wrong way. They failed to use the machine tools and caused a lot of damage.

Director Tang was heartbroken and ashamed.

These high-end machine tools were originally imported by the machinery factory at a large cost, but once they were put into production, they felt useless.

They felt that this high-end machine tool was not worth the money at all, and it simply made them vomit blood.

They also communicated with foreign engineers on the phone, but the other party did not know where the problem was. They only guessed that it was not compatible with the previous production line.

But now, this beautiful girl has solved the problem easily.

Consultant Song had not solved this problem before!

"Consultant Song, where did you invite the fairy?" Director Tang asked Mr. Song.

"They're all fairies. What do you think? They came from heaven." Mr. Song also made a rare joke.

Director Tang,...

At this time, Gu Fairy Xia wiped off the engine oil on her hands, stretched her sore arms and back, walked over and said to Mr. Song,

"Grandpa Song, I have read it. Our Chengfeng Machinery Factory does have the ability to make feces disposal machines. How about we start the project tomorrow and allocate some manpower and lathes to put it into production as soon as possible."

Mr. Song's mood was too agitated and he didn't respond for a while.

Director Tang's forehead was filled with questions.

What feces disposal machine?

Establish the project and put it into production?
  Are you talking about them?

They won't!
  "Don't worry, it's just a transfer of three machines. It won't affect the original orders of the machinery factory, because the yield rate of the machine tools has increased."

Gu Xia spoke again.

"So, you went through so much trouble to repair all the machine tools?" Mr. Song asked.

Gu Xia nodded.

Mr. Song's eyes softened a little when he looked at Gu Xia. What a good boy!
  "Counsellor Song, Comrade Gu, what are you talking about?" Director Tang asked.

"Gather the factory director and others to have a meeting. I will explain at the meeting." Mr. Song said with a smile,
  "Our Chengfeng Machinery Factory is going to ride the wind and waves, leap over the dragon's gate, and take off!"

Director Tang,...

He looked at the old man, then at Gu Xia, suddenly his whole body was excited, he responded excitedly, and ran away quickly,

"I'll call someone right away!"

He felt like he was about to take off too! (End of chapter)