Versatile Mage: Rebirth of Mo Fan, it makes sense!

Chapter 84 84. Forging Practice Assessment

Chapter 84 84. Forging Practice Assessment
The formation master is actually a very popular profession, who is specifically responsible for adding barriers to equipment. The defensive formations in high-speed railways, the arena formations in colleges, and some special formations all require formation masters.

There are other popular majors, such as Lanxiang. Some children who are not talented in fire choose to apply for the chef major. As the saying goes, you may not be good, but your skills must be good.

There are also some delivery majors, such as the space department where talents are awakened, but they cannot be cultivated and can only be transferred as delivery majors.

However, since the Internet is not very developed nowadays and the takeout industry is not very popular in small cities, people basically do some ordinary postal and freight work after going out.

The second exam was about formations. Mo Fan knew some of it, but not all of it. So out of 100 points in this subject, Mo Fan would only get half of it.

Passing the blacksmith assessment in the afternoon is a sure thing.

the next day.

The magic assessment and magic release in the morning were no problem at all. Mo Fan was a combat mage, so these assessments were a piece of cake for him.

The third day's exam was the hard currency exam, which tested the basic theories and practical problems of blacksmiths.

The basic theory in the morning covered all subjects, and Mo Fan wrote nearly four or five papers on theory.

The basic practical questions in the afternoon are a key part. You need to make a simple magic tool process under the teacher's requirements, which is a basic test for the blacksmith apprentice.

"Okay, the content of this assessment is an on-site answering session. The teacher will randomly check the students' mastery of demon materials and items. If you answer correctly, you will get extra points, and if you answer incorrectly, you will lose points!"

Soon it was time for the practical exam on the third afternoon.

More than 30 candidates gathered in a classroom.

There are two teachers invigilating, each responsible for the practical assessment of the students.

"Liao Bujin!"

After the teacher called the roll, the student named Liao Bujin stood up.

"Okay, please tell me which part of the organism this material came from?"

"This is the horn of a black-eyed bull. It is a very special bone!"

"Okay, perfect answer!"

Then the teacher continued to ask questions.

Mo Fan listened to this test quietly. It was like a one-on-one test, with one student taking the test and another taking the test. Each question had its own merits.

The question asked by the first student was exactly the same as the common monsters that Mo Fan encountered in Huangpu New City before.

Mo Fan was lucky and obtained the strange bone on the spot.

After about half an hour, it was finally Mo Fan's turn to take the test.

"Mo Fan!"

Mo Fan came to the teacher and waited for the teacher's questions.

The entire large table was filled with various demon parts and various forging tools.

The so-called theoretical test consists of just these few steps. First, you need to answer the name of the monster type asked by the teacher, then identify the name of the forging tools, and then simply use these tools to process the existing materials according to the teacher's repetition.

Mo Fan waited for the teacher's questions. The teacher pointed out the skeleton of the demon and asked Mo Fan to identify it.

To be honest, Mo Fan had seen quite a few monsters in his previous life, and since he was trying to make up for his shortcomings in this life, these basic problems were simple and easy to solve.

After the monster name test, the teacher asked Mo Fan to identify the forging equipment.

"what is this called?"

"Forge furnace!"

This is considered an essential equipment for a blacksmith, similar to that for a magician, with the difference being whether or not one has a spirit seed.

As we all know, the soul of a chef is a good iron pan. If it is not used conveniently or poorly, the dishes cooked may not be delicious.

The forging furnace is the second face of the blacksmith. If the forging furnace is not used smoothly, the quality of the magic tools forged may not be high.

"Yeah, great, what about this?"

"Forging hammer!"

This is one of the most basic tools in forging. Putting the material into the forging furnace must be smelted and melted. During the melting process, you need to hammer it all the time to make the rough blanks completely shaped. There are also certain differences in the hammering technique and the forging grade.

It's the same principle as forging iron, or making steamed buns and dough. "What about these?"

"Pressure control magic tools, molds, fixtures, measuring tools, and painting magic tools!"

Pressure controlled mold.

To put it simply, it is a kind of auxiliary magic tool forged by special use of space array. This kind of magic tool uses the space array driving device to make the working magic tool move back and forth repeatedly.

A mold, as the name suggests, is a mold produced by the blacksmith himself, which is a form of mass production.

Mo Fan's forging shop uses this kind of mold to mass-produce high-quality magic tools, rather than being carefully polished bit by bit by a blacksmith.

The clamp is actually an auxiliary device. In a high-temperature furnace, sometimes the temperature of the flame may be higher than the flame temperature of the magician's own spirit seed, and a special clamp must be used to take it out.

Measuring magic tools are also very simple. What shape do you want? What scale do you want? You need this tool.

Such magic tools include calipers, vernier calipers, micrometers, surface roughness gauges, etc.!!!

The last auxiliary magic tool is the magic drawing tool.

It is also the last step in the process.

Generally, the magic tools created are nearly one square meter in size, so it is necessary to use a precise drawing magic pen to carve the magic circuit.

To put it simply, it means carving a formation on this semi-finished magic tool.

This is the principle by which magic tools can be enlarged or reduced in size and imprinted in the mind.

Therefore, the theory of forging also involves some of the mysteries of space formations.

"Okay, last question, the process steps for forging magic tools by the blacksmith!"

Mo Fan thought for a moment and said, “The first step is the preparation before forging, such as the special demon bones and forging equipment, etc.”

"The next step is cutting, heating, forging and deformation, cooling, heat treatment, drawing formations, cleaning and inspection!"

The first step is definitely to prepare the materials and some forging tools, and then put the special demon bones into the forging furnace.

At this time, the role of the fire mage and the thunder mage comes into play. The fire mage needs to add flames, heat the materials, and forge and deform them.

After heating to a certain degree, the desired shape needs to be cooled.

The so-called heat treatment is nothing more than improving the performance of the magic tools. The next step is to use a special magic pen to draw the formation, and then clean and inspect. The purpose is to ensure the smooth flow of magic energy and ensure that the magic tools can be used.

"You speak well and fluently. It seems you have put in a lot of effort. Next, we will start the practical assessment!"

The teacher nodded in satisfaction and announced the next test content, "What you have to do next is to simply perform material cutting operations and formation drawing operations!"

Mo Fan nodded.

【Update time】

5 updates before each day 『√』

Every word is changed 『√』

Note:

If there are any minor points or inappropriate places, please point them out in the comments. In addition, if you find any typos, please remind me

Note:

Those who have finished reading please leave a comment of "read" or "check in" in the comment section

If there are 0 comments in the comment area on a certain day, the daily update will be cancelled!!!

The following chapters involve the basic theory of forging, which is a bit demanding, so please read it patiently.

【Daily Discussion】

Is it poisonous to get rid of Saran?