Lin Gao Qiming

Chapter 223 Five-Year Plan ([-])

Ma Qianju strikes while the iron is hot: "Since everyone agrees with this plan, I suggest that our overall construction plan start with the second phase of the Bairentan Hydropower Station. This overall plan is called the 'First Five-Year Plan'."

In the first five-year plan system envisioned by Ma Qianju, the Wenlan River system project has three major functions of shipping, irrigation, and power generation, and the industrial and agricultural system is laid out with the river as the center, which is completely consistent with their original idea. , but this plan puts forward the utilization method of Wenlan River in a more specific way.

The future industrial bases will all be located in the lower reaches of the River East, and if there is any expansion in the future, they will extend to the Mayao Peninsula.A series of ports such as Mayiao Port and Hongbai Port around Mayiao can be used.In the 20th century, several large-scale industrial investment projects and development zones in Lingao County were also located in this area.

Crossover Group has planned two major industrial zones: a steel-chemical industrial zone centered on Bopu Port.Give full play to the advantages of large volume and low price of sea freight.The fleet transported anthracite coal from Vietnam, pig iron, wrought iron and bituminous coal from Guangdong, iron ore from Tiandu, timber from Fujian, and chemical salt from the Mayao Peninsula...

The machinery industry-light industry zone centered on Bairen City is also arranged in Hedong.

In this way, the traversers only had two industrial areas in the early days.The industrial areas are few and concentrated, and the area they need to protect by force is relatively small. The lines for transporting electricity, coal, equipment, and finished products are also shorter, and transportation and energy consumption costs can be minimized.

The steel and chemical products manufactured by Bopu, as well as various raw materials shipped from the sea, can be directly transported to Bairen Industrial Zone for processing and manufacturing through the water transportation channel of Wenlan River, and the finished products can be transported by water to Bopu for export. .

The current power supply is mainly based on the Bairen Hydropower Station. After planning to produce its own boilers and power generation equipment in the future, the Crossing Group will set up a thermal power plant in Bopu, using seaborne Hongji anthracite to generate electricity, and directly supply the energy-intensive chemical industry. powered by.

The Industry and Energy Council's plan to accomplish the following goals within the first five-year plan:

Complete the construction of a complete iron and steel enterprise, including: ore dressing plant, ore sintering furnace, coke oven, blast furnace, hot blast stove, iron melting furnace, and install another converter in addition to the existing small converter.

The concentrator has 2 concentrators, 5 pulverizers and 2 crushers brought from another time and space.

A small special steel factory that manufactures various special steels using the crucible method.

A rolling mill with:

2 preliminary forging machines, 2 hot rolling mills, 2 hot piercing machines, 2 cold rolling steel mills, 2 cold drawn steel pipe machines, 2 cold drawn bar machines, 2 cold rolled steel pipe machines.It can conveniently cold-roll and hot-roll steel plates, strip steel, wire rods and various section steels of various common specifications.

By the end of 1634, this iron and steel complex had reached the level of daily production of 80 tons of iron, 50 tons of crude steel, and 100 tons of special steel per year.

冶炼有色金属：粗铜160吨，生产电解铜120吨、镍锭3吨、钴10吨、铅140吨、锌80吨、锡12吨、锑20吨。

These non-ferrous metals are mainly imported as ores or crude products, and are further refined in the metallurgical sector.

Although non-ferrous metals are not in great demand except for copper and lead, they are essential in many key places.Fortunately, these products had already been produced on a considerable scale in the Ming Dynasty, and there was no problem in importing a certain amount of crude products from the mainland.

The metallurgical industry seems to be a huge system, but its five-year plan is the least difficult.With the existing industrial system of the traverser, it has been able to provide necessary materials such as cement, bricks, and refractory materials without any difficulty.The most technologically advanced rolling mills all use equipment brought from another time and space, which can be put into use as long as they are installed in place.As for the blast furnace, there is no big technical problem for the traveling people.

"In addition to refractory materials, ore dressing and blast furnace feeding require some special equipment, I hope the machinery department can provide them. At that time, we will need your strong support." Ji Wusheng said.

"No problem," Zhan Wuya agreed, "The key is that the steel can be guaranteed. I have seen these equipments. It is not difficult. Some of them can be made of wood."

The goal of the Ministry of Machinery Industry is to complete the self-upgrading system of the machinery industry within the first five-year plan, which can not only satisfy the production and manufacture of various special equipment across the industrial system, but also complete self-renewal and upgrading.

But the problems facing the construction of the Ministry of Machinery Industry are much more complicated.Due to the tonnage of the ships, the Transit Group brought quite limited machinery and equipment. Many special equipment were not brought due to the tonnage and space. The equipment in the hands of Zhan Wuya and other machinery is the most basic general-purpose machine tools, lathes For the largest.

In theory, these so-called "industrial mother machines" or general-purpose machine tools, such as lathes, punches, vises, and planers, can produce any product, but the reality is far from that simple.

Since humans entered the era of industrialization, a clear development route for machine tools is: higher efficiency and lower production costs.For general-purpose machine tools represented by lathes, the increase in processing efficiency is very low. Unless workers and equipment are infinitely increased, the output will not increase.

The simplest such as screws commonly used on industrial equipment, this little thing is scientifically known as "standard parts" in the industry.The so-called standard parts refer to the commonly used parts (parts) that have been completely standardized in structure, size, drawing, marking and other aspects, and are produced by professional factories, such as screw parts, pins, washers and so on.These parts are used in the connection and fastening of various industrial equipment.

This type of standard parts was indeed processed by ordinary lathes in history, but the processing efficiency was very low. Workers had to cut multiple times during processing, and each time they had to carefully set the tool; the manufacturing cost was also uneconomical— ―Clamping a round bar on it, and finally cutting out a small bolt, the waste of material is huge, and the requirements for workers are also high during processing.

Therefore, in actual production operations, standard parts are manufactured with special machine tools. Even the simplest and most common hardware parts such as iron nails are produced with special machine tools in modern times.

The first task of Zhan Wuya's Machinery Industry Department is not to manufacture their equipment for various industrial departments, but to complete equipment matching for its own system and manufacture a batch of special machine tool equipment.Build a mold factory, a foundry factory, a standard parts factory, a bearing chain factory and a tool factory.

"You don't know how much this system will promote the industry once it is established. The machinery industry can manufacture different special machine tools according to various product needs! Combined automatic machine tools!" Wang Luobin said excitedly, "Know what is called big industry Is it? With this system, we will have a real big industry.”

"Let's use an analogy," Li Yiluo, who has made black guns, explained: "Everyone is worried about the supply of bullets. In fact, it is not difficult to make bullets. I can make them at the machinery factory with the existing equipment. , but in this way, you can’t make dozens of rounds a day, and you’ll lose it as soon as you grab the trigger. If we build a bullet production line, although we need to manufacture more than 30 sets of equipment, we can manufacture thousands of rounds of bullets in an hour. The productivity is terribly high.”

"Can you make K98?" Wei Aiwen asked.

"K98 is a fart." Xiao Bailang looked disdainful, "AK47 is nothing to worry about."

"I want K98, or MP44 is fine." Wei Aiwen is a loyal Hardite.

"After completing the self-supporting of the machinery industry department, we will experimentally carry out the reproduction of general-purpose machine tools, or call it self-replication." Zhan Wuya said, "After all, there will not be only one machinery factory in the future, and the demand for general-purpose equipment will increase. Big."

Jiang Ye said: "Now we have not as many machine tools as a workshop in the factory where I used to work."

Ma Qianju agreed: "Now we are operating on Hainan Island. In the future, we will occupy Taiwan Island or land on the mainland. We need to replenish firearms and ammunition and develop local industries. All equipment cannot be manufactured in Lingao. Let’s transport it over there. We still need to set up a few more machining centers.”

"I don't think so." Wen Desi said, "To ensure the stability of our time-traveling regime for generations to come, the core system of the machinery industry cannot spread, and it must be firmly in the hands of the time-traveling group."

He made a further explanation: "Suppose: If a local old man wants to open a textile factory, we can provide the most advanced textile machinery and power equipment in this time and space at a discount, and provide maintenance services at the same time. However, in addition to using these equipment, He can neither repair nor reproduce the equipment. Everything depends on us."

In his vision, in the future world, only the Traveling Group has the ability to manufacture machinery and equipment. Rich people or countries in this time and space can buy weapons, equipment, ships and vehicles manufactured by the Traveling Group, but once these things are lost Without the maintenance guarantee provided by the Traveling Group, it would be completely scrap iron.In this way, the industrial lifeline of the entire world is completely in the hands of the Traversing Group.

"Isn't this the Mechanicus in Warhammer 40?" Xi Yazhou had rich associations.

"Can't science be a religion?" Wen Desi asked rhetorically, "We have mastered the science and industry beyond the level of this time and space, and it is not too much to ask to rule the earth?"

"Then there must be the Gray Knights of Science!"

"You idiot, why don't you set up the Sisters of Science. Nice nuns."

"Who will be the Emperor?"

……

"We'll talk about this later," Ma Qianju hurriedly brought the topic back, "Let's talk about how much special equipment the Ministry of Machinery Industry can provide for each department."

(End of this chapter)