Coquettish Rebirth

Although it was said that Tomita Electric was only willing to sell 30% of the shares, Jia Hongjian didn't take it seriously-maybe this was just a verbal bottom line, but actually the psychological bottom line was even lower?So he asked the negotiators in front to continue to explore the other party's bottom line to see if they could buy 40% of the shares or even more.Then he put his mind on redesigning the shape of the SUV with Mr. Guo Konghui.In terms of designing SUVs, Jia Hongjian felt that he must be involved. Why?First of all, not to mention how many products of Huaxia High-tech are from his hand, Jia Hongjian, but the reason why this SUV design cannot lack him is that this car is completely different from other manufacturers' SUVs!What's the difference?Our car doesn't have an engine!Our machine uses an electric motor, and our electric motor is not placed in the traditional engine position, but placed near the rear suspension, which is placed in the traditional mailbox position.In this way, wouldn't the engine compartment where the engine is installed in the front of the general suv be empty?

When it comes to the empty engine compartment, many people will understand, but they still don't understand why the empty engine compartment has something to do with Jia Hongjian's decision to design the shape.In Jia Hongjian's opinion, this matter was too obvious - just talking about the front of the car, why does the front of the car usually have a dimmed air intake?What is this thing for?It is natural air intake to introduce fresh air to the engine, and provide ventilation and heat dissipation for the heat sources that need to be cooled, such as the air conditioner condenser, water tank, and oil radiator!In other words, as long as we can provide cooling for the air conditioner condenser and the oil radiator, then there is no need to open an air intake in the front of the car to provide fresh air to the engine, and there is no need to provide cooling for the water tank!

And this will lead to a huge change in the design of the front part of the car. Is it enough to just find the people below to design it?How many cars are there on the market now without an air intake at the front?So this design can be said to create new history?Can we not participate at this time?And to be honest, this suv has no front engine.So in fact, the front of the car does not necessarily need to be designed as high as the traditional suv!In fact, because the front of our suv is empty, it is equivalent to having an extra suitcase.Except for the various reinforcement ribs and other designs added in it, the front of the car is not able to protect the front row people enough to prevent a collision. The height of the front of the car is actually adjusted at will!So as long as we are willing, the chassis of our car can be a new one modified from the MPV site, and the body can actually be made as streamlined and low as a sports car!That is to say, except that the site is higher than the average sports car.Other places can be the same as sports cars!

Of course, this may result in much less interior space than other SUVs, but this is also an innovative idea!For example, in the case of ensuring that the overall body height is similar to that of ordinary suvs, reduce the height of some of the front of the car?Because of the high ground of traditional suvs, the front of the car is actually relatively high. At the same time, the front of the car is relatively horizontal. Even if there is a slope with a high rear and a low front, the slope is generally not large.But because there is no engine, water tank and other things in the front of our car, it means that the front of our car can actually be made higher at the rear and lower at the front!And the higher the back and the lower the front, this means more streamlined!

That's right.High rear and low front does not mean straight straight line, it does not mean that the front of the car should be as sharp as an axe, but that we can use an arc to make the front of the car quite streamlined, just like Toyota’s back then. Bullet mpv official car is the same!However, Toyota's bullet mpv has a very short front and does not look domineering, but what Yankees like most is domineering.And let's make the front of the car longer, then make it more streamlined, and then design the front of the car to be more powerful and domineering.By the way, the pillars on both sides of the windshield are adjusted to match the curve of the front of the car with a low front and a high rear. Then this design will definitely have an aerodynamic effect, right?

Of course, such a design.Jia Hongjian discovered the problem just by drawing a sketch—because the front of the car is long and streamlined at the same time, which makes it look like the front is long and the back is short when combined with the rear passenger compartment!Just like the type of car that was popular in Europe and the United States a few decades ago—especially the Ferrari 250gto, which was developed as a racing sports car back then. The shape is that there are only two seats, and the front body is quite long. !The driver's position is already close to the rear wheels!The whole car looks like it is long and flat in front.And the back is tall and short, it is quite unbalanced!If this kind of design is specifically for retro, it would be pretty good, but the problem is that we are not specifically for retro!At least Jia Hongjian himself can't appreciate this style, at least he himself thinks it feels very unbalanced!So he felt that this would increase the length of the car.If only two rows of seats are made in the car, it will not look good!And if it is made into three rows of seats and the rear passenger compartment is elongated, it will feel relatively balanced!

If the third row of seats is added, Jia Hongjian designed and designed the car. In order to make the car look domineering and good-looking at the same time, and not to look too much like an MPV multi-purpose van, then simply put the third row The seat is made of only two seats.In this way, the first row has two seats, the second row has three seats, and the third row has two seats.In this way, if the entire body is looked down from directly above, it will also have a narrow front and rear shape similar to a water drop suit and a slightly wider middle.The highest point of the roof of the whole car reaches the highest point on the left and right sides of the driver's head, and then slowly lowers down. Through such a design, the effect of visual front and rear symmetry is achieved.Of course, in this way, the headroom of the third row of seats will inevitably be less, so the angle of the seats should be adjusted slightly larger, so as to ensure sufficient space.

After such a design, the length of the car is really long!This requires a new site change, but this is not a problem, anyway, the designer is hired, isn't it just for them to draw.Although Jia Hongjian reckons that the designers will be aggrieved when they hear the news, but this is already very good. At least his boss is very interesting to the designers, at least it will not let everyone Change the picture overnight?At least it's cuter than those Party A who don't know shit, right?As a reborn person, Jia Hongjian had several designer friends in his previous life. After these friends met Jia Hongjian every day, they would make all kinds of complaints about Party A's idiots!

According to them, Party A has already decided on the requirements, and after the designers have worked hard to design the drawings, Party A has to change the requirements at this time!Just change it, but the time is very tight!The designers who often do it have to change the drawing overnight!As a result, after the modification was completed, Party A said lightly—"I feel like I haven't changed a few places, and the changed places are not as good as the previous plan..." Your sister's plan definitely made the designer feel impulsive to find a kitchen knife to chop. How about dead Party A!

Although we, as the boss, let the designers revise the manuscript after designing the site, and re-argument the balance, the center of gravity, where the various components on the chassis should be located, and how the force will be, etc. But at least we are not forcing designers to work overtime!And we won't let them change it, and then say that it would be better if they didn't change it, right?So Jia Hongjian felt that if he was a designer, he would rather work for a boss like himself!

After a few days of work, the new site design drawing was revised.And Mr. Guo also came to see a sketch of the outline drawn by Jia Hongjian, "Yo, Hung-chien! Our car doesn't have an air intake!" When the old man saw the three-dimensional view drawn by Jia Hongjian, he immediately noticed the car. The most notable feature of the front face!A car like Jia Hongjian, from the front, doesn't seem to be much different from other SUVs, except that the headlights seem to be positioned a little lower.But between the two headlights, on the bumper, there is no traditional air intake position!At the position of the air intake, there is a huge metal surface connected between the two headlights.This metal surface is made of a huge Tesla logo!

At the same time, the metal surface is designed with the middle protruding forward and the sides leaning back a little, so that people feel that the front face is really domineering!There is really a feeling of going forward bravely, as if anyone who stands in front will be knocked away!It's like the visor that the ancient European knights put down when they wore helmets!Looking at the side view, the front of this car is obviously lower than the front of a normal suv, resulting in a more streamlined front of the car, coupled with the windshield that is obviously more backward, the overall wind resistance looks much smaller than that of a normal suv few!And I don't know if it's because the overall passenger compartment is longer, so even if the front of the car is flattened, the proportions don't look abnormal, and it doesn't look ugly!Coupled with the waistline that Jia Hongjian made at the side door that runs through the entire side body, the whole car looks like a cheetah full of explosive muscle power, ready to lower its head and charge forward!

Even though the old man is quite old, the old man still has a strong ability to accept such a conceptual and sci-fi car designed by Jia Hongjian!In any case, the old man has always been fighting on the front line of car manufacturing, and he has also been fighting on the front line of car design!That aesthetic is totally timeless!After the old man is very optimistic about the shape designed by Jia Hongjian, the next thing to do is to make a scale model that has been reduced many times to go to the blowing hole-this will save money, although it is also possible to build a car and then use the real car blowing hole , but if you want to modify it, wouldn't the already finished car be wasted?And if you use a model to blow, it is generally a magic weapon to save money and be efficient when the design is not finalized! (To be continued..)