Traveling through the sword to engage in military industry.

Chapter 88 The Machine Tool is about to be completed

Main plane.

"Junior brother, we have copied and produced all the machine tool parts you wanted. The drill bits and other key cutting and boring parts are all made of the best tool steel available. It is very difficult to process these parts, but the effect is really great, and the processing life is very long. Junior brother, when is it convenient for you to come and have a look and inspect them casually?" Ren Zhong received a call from Li Shaoxin just after he came back.

This is one of his disciples who was his cheap master, Mr. Cao. He has now received several orders from Ren Zhong, including manual punching machines, key parts of 6140 old machine tools, and 50KW water turbine engine assembly production.
Due to the large number of orders, there is a tendency for me to gradually become a tool.

Li Shaoxin and Wu Jiancheng are apprentices of Mr. Cao, an eighth-level fitter. They have also obtained the skill certification of eighth-level fitters. Machining is basically the ceiling in Jincheng.

"Brother Li, that's great. I'll be there right away." Ren Zhong was overjoyed and drove there impatiently.

On a 6140 machine tool produced in the s that Ren Zhong found like junk, two senior brothers Li Shaoxin and Wu Jiancheng skillfully disassembled the original machine tool into a pile of spare parts, and then reassembled it with new parts they had processed themselves.

As soon as the machine switch was pulled, the entire machine started up without any pause. Li Shaoxin casually changed a drill bit, took out a piece of steel plate, and began to drill neat holes in the steel plate as if he were using his own arms.

"This is No. 45 steel. For our drill bit, it is like drilling tofu. What do you think, little junior brother, I didn't lie to you, did I?" Li Shaoxin said with some pride.

He is already in his forties, but he never expected that one day he would be able to make a bunch of spare parts by himself and recreate the 6140 that he could operate with his eyes closed thirty years ago.

Of course, in terms of processing reliability and service life, Li Shaoxin feels that his set is at least 50% stronger than the original one, because today's tool steel materials are much stronger than those in the 70s.

"Not bad, not bad, Senior Brother Li and Senior Brother Wu are really awesome." Ren Zhong's eyes lit up when he saw this. Flattery doesn't cost money, just praise them as much as you can. "Senior Brother Li, I am really very satisfied. Next, I will make a hundred sets of parts like this. I can sell a lot of them in Heifei, but considering the transportation cost, I will customize the castings locally in Heifei."

"Next, Senior Brother Li, can you teach me how to load and unload? I want to learn some useful skills. After all, there are not many talented people over there, so I have to rely on myself."

“No problem, you just need to remember the order of a few key points, that’s it.” Li Shaoxin felt even more proud when he saw that Ren Zhong was satisfied. As for the order for one hundred sets, that was icing on the cake.

He is a little different from Uncle Cao. As long as there are orders, he is happy with the work and does not ask too many questions.

"Junior brother, this machine tool cannot be installed by one person alone. It will be more convenient if two people work together," Wu Jiancheng also explained from the side.

"Wait, brothers, let me take a video with my phone. I'll watch the video later to get a feel for it." When Ren Zhong saw his two brothers taking action, he quickly picked up his phone and started watching and filming.

After looking at it once, Ren Zhong felt that the assembly was not that difficult. In the hands of the two senior brothers, the parts were disassembled one by one, and it seemed very simple.

"Two senior brothers, please just stand by and watch while I put it back. This time, don't say anything. Let me see if I can put it back by myself." After the two men finished dismantling, Ren Zhong volunteered with great confidence.

"Okay, little junior brother, you have a high level of comprehension." Li Shaoxin said with a smile.

The two really stood aside and began to watch Ren Zhong assemble. Since he had just seen the parts in front, it was not a big problem for Ren Zhong to reassemble them. However, as the parts became more and more, Ren Zhong began to get stuck. It was not easy to remember dozens or hundreds of parts at once. Ren Zhong turned on the video of his mobile phone and started to watch it. He wanted to bring his mobile phone to the world of Sword and Fairy after he finished it independently. Although there was no signal, it was like a brick, but the video could be watched, as long as no one found out that he was looking at the phone.

After assembling the machine tool with some bumps and bumps, Ren Zhong discovered that there were still five small accessories left and he could not find any place to install them. He was dumbfounded.

this.
Ren Zhong's face turned red.

He can see with his eyes, but he hasn’t mastered the use of his hands yet.

"Two senior brothers, where are these installed?" Ren Zhong stopped pretending. He was originally a liberal arts student. Isn't it normal to make some small mistakes when doing these things?

Why do you have to compete with yourself?

In an instant, Ren Zhong's thoughts became clear again.

"Let me take a look. This is for the drill bit." Li Shaoxin and Wu Jiancheng picked up the small accessory and quickly pointed out where it should be.

Following the personal instructions of the two senior predecessors, Ren Zhong dismantled most of it again, found the installation positions for all the small accessories, and re-installed them. Once the entire machine tool was turned on, it started operating immediately!
However, this thing is too old. It was originally an old machine tool from the 70s, and was produced in many machine tool factories. Later, it was transformed into CNC. Ren Zhong did not consider introducing the CNC version into the world of Bright Sword, as that is too advanced. Apart from anything else, even Ren Zhong himself would have difficulty in training himself to assemble it successfully.

Things like this that are so far ahead of their time should not cause chaos in the world of Bright Sword.

Next, Ren Zhong tried to install it several times, and basically succeeded in turning the machine tool. After two old masters tested it and found no problems, Ren Zhong was sure that he had mastered the installation and disassembly techniques. Anyway, there was a video reference, so he basically mastered it.

So he directly took away this set of machine tool parts and brought them to the World of Bright Sword in batches.

As for the casting part, the three-dimensional graphics of standard sizes are printed out from the main plane and brought to the world of Bright Sword, where people start to shape the models in preparation for casting.

On the other hand, the production process of gray cast iron is not complicated, and the main plane has a very mature ratio. Professor Hu simply simulated the raw material formula of gray cast iron in the Liangjian world through a super minicomputer based on the raw material situation of the Liangjian plane, and deduced an optimal raw material ratio. Ren Zhong directly gave this ratio data to Xu Jiuchen for trial production.

With the detailed formula, Xu Jiucheng successfully refined high-quality gray cast iron in one furnace, and the grade directly reached the HT350 level. This great achievement made Xu Jiucheng very excited, as he finally refined the best cast iron in his life. However, it also made Xu Jiucheng feel a little desperate. How could a formula casually given by his boss reach the world's advanced iron-making level?

Xu Jiucheng had no idea that Ren Zhong had a world of new knowledge to support him.

People only think that Ren Zhongtian is a genius. His initial arrogance has been completely worn away and he has become a qualified tool.

The third update!



(End of this chapter)