The Red Era, the Opening University Speech

Chapter 301 The boy who slays dragons finally becomes a dragon
Shen Zhongyi, who had been following Li Mu, teased:

"Advisor Li is right. Old Zhang, you should pay attention to this issue."

"The superiors have also issued a special document asking all researchers to put their health first and protect our life capital so that they can make more contributions to the country."

"Your research base is far away from the emperor, but you can't disobey orders, right?"

The Institute of Atomic Power where he worked had undergone several rounds of rectification under the supervision of the higher-ups.

Everyone was a little resistant at first, but after persisting and finding that after a good rest, the research speed was not only faster than before, but also became much easier, so they gradually accepted it.

But the situation in Sichuan and Chongqing is different.

In other words, most parts of the country have not fully implemented this instruction document.

"I know you are right, but I have a heavy responsibility on my shoulders. They are secretly trying to do research on it. What can I do?" Upon hearing this, Zhang Yunhua was no longer in a hurry to look at CAD and CAM and sighed.

At the end, he looked at the experts and professors in the institute, feeling helpless.

Shen Zhongyi smiled and said, "That's a coincidence. Consultant Li is an expert in this area. I think you can go and learn from him."

"Ahem, let's talk about the software first. As for how to get everyone to pay attention to their health, it won't be too late to discuss it privately later." Li Mu glanced at the experts and professors behind him and interrupted quickly.

If you don't speak up, your secrets will be exposed.

Zhang Yunhua nodded happily and said, "Okay, research and development is the most important thing, and it won't be too late to talk about other things later."

……

Everyone was chatting.

The software debugging work is finally completed.

After the person in charge of the computer group reported.

Li Mu walked straight forward and operated the Type 02 computer.

First, he drew the design he had just drawn again.

As he painted, he said:

"The current CAD functions are relatively simple, with only basic drawing and editing tools, and they also need to rely on commands to operate."

“But it can impose geometric and dimensional constraints on the graphics, and to a certain extent, it can avoid our mistakes in drawing.”

“For example, here, the data I marked exceeded the range of the computer’s calculation, so it was marked out.”

……

In order to enable everyone to fully understand the functions of CAD.

Li Mu added some modified data during the drawing.

After the drawing was completed, Zhang Yunhua and Shen Zhongyi looked at the design drawing on the Type 02 computer, their eyes brighter than each other, and they immediately praised it.

"Stop, stop." Li Mu hurriedly stopped and continued: "Let's talk about CAM. Its most important function now is computer-aided machining parts programming."

"By inputting the process route and process content of the parts and outputting the motion trajectory and CNC program of the tool during processing, the manufacturing process can be automated and precisely controlled."

“It includes an auxiliary process planning process, which can encode the original data, processing conditions and processing requirements obtained from CAD by computer, and then give an industrialized process.”

As he spoke, he input a design drawing of the steering device, which is part of the submarine's control system, into CAM.

After about 30 seconds of waiting, the CAM software shows that the input is completed.

“Next, as long as it is connected with the relevant CNC machine tools, mass automated production of steering devices can be carried out.” Li Mu said finally.

Of course, this process is definitely not that simple.

As expected, Zhang Yunhua asked, "With our current CNC machine tools, I'm afraid we can't fully achieve such high-precision data, right?"

With his keen eyesight, he could naturally see that the steering device after optimization and upgrading had definitely achieved a qualitative improvement.

But the disadvantages are also obvious - it is currently difficult to achieve.

“We can’t say it’s completely impossible. Just because CNC machine tools can’t do it, we can rely on manual labor to solve it.” suggested an old researcher.

This idea won the support of many people.

It is not an exaggeration to say that we workers are powerful. Sometimes, what computers cannot achieve can be achieved by humans.

Li Mu waited for everyone to finish speaking before he smiled and said, "Everyone is right. It is indeed possible to reach the standard by hand rubbing by senior workers."

"Oh, Consultant Li, do you have any better idea?" Shen Zhongyi looked at his expression and suddenly made up his mind, so he asked.

After working with Li Mu for a period of time, Zhang Yunhua and others couldn't see it, so how could he not see it?

Seeing this, others also asked Li Mu for help.

Apart from manual work, they really couldn't think of any other way. Importing equipment was also impossible, as Emperor M and Big Brother would hardly sell it to them at this moment.

Zhang Yunhua thought for a moment and said, "If it involves confidential information, Consultant Li, please don't say anything."

Even though the confidentiality level of the atomic submarine research base is already very high, no matter what the level is, as long as it is confidential, the research situation of each party cannot be shared.

"It's not really a secret, so it's okay to reveal a little. Kyoto is developing a 3+2-axis CNC milling machine. Once successful, it will be able to achieve high-precision production and processing, and the problems that everyone is worried about will also be solved." Li Mu said.

After that, he briefly introduced what a 3+2 CNC milling machine is.

After hearing this, everyone couldn't help but widen their eyes in shock.

If we can really make a 3+2 CNC milling machine, the impact on Xia Country’s industrial development will be almost immeasurable!

Zhang Yunhua took a breath and said:
"Advisor Li, is there anything you don't know?"

"I am a little ashamed now that Director Shen invited you here."

"It is far more important for you to stay in Kyoto and do research than to come here!"

At the end, he couldn't help feeling a little ashamed.

Atomic submarines are certainly important.

However, in terms of its role in promoting the country's overall industry, it is far less important than the 3+2-axis CNC milling machine.

"You can't say that. I came to Sichuan and Chongqing for my own considerations. Besides, it's not like we can't do research there without me." Li Mu shook his head.

The Aviation Academy is full of talented people, even though they were unable to digest the advanced information he provided at the beginning.

But given time to digest it, they will be able to prove why they are able to enter the country's top research institutions.

According to the progress, we should have almost mastered the theories in the materials and start the experiments.

……

Afterwards, Li Mu continued to demonstrate the functions of CAD and CAM to Zhang Yunhua and others.

They are all rare talents selected from thousands, with excellent comprehension. After a few times, they have learned a lot.

Once everyone has fully mastered the task, his mission will be basically completed.

The rest of the time is at his disposal.

He spends most of his time studying in the archives room.

Although Zhang Yunhua and Shen Zhongyi often brought some experts and professors to ask him about the semiconductorization of electronic equipment.

But these problems are not difficult in themselves, and Zhang Yunhua and others have already carried out a certain degree of research, so they are very easy to solve.

Occasionally, he would be invited by Zhang Yunhua to go to the various laboratories in the research base to "catch people."

Those who did not take care of their bodies for the sake of research were all "educated" by him using the words that Guo Mo and others had said to him.

As for those who refuse to change their ways despite repeated warnings, they will be directly banned from entering the laboratory.

Neither Zhang Yunhua nor Shen Zhongyi could do this, but it would be very appropriate for him to do it. He would be leaving in a few days anyway, so he was not afraid of offending anyone.

——It can be said that the dragon-slayer boy finally became the dragon. But the effect is also very good. At least after a few days, the researchers in the research base are in much better spirits.

Li Mu was very happy with this part-time job. After arresting someone, he could stand on the commanding heights and criticize him earnestly. It turned out to be so pleasant. No wonder he always...

Four days passed in a flash.

Starting from the demand analysis for designing nuclear submarines, we move step by step to concept design, overall layout design, prototype production, and test verification.

Li Mu read through the entire design plan for the atomic submarine.

After obtaining approval from above, he even went directly into the structural laboratories of the atomic submarine, including the torpedo compartment, command compartment, and reactor compartment.

After some practical learning, the gains were considerable.

Even if he could find more advanced and detailed information from the chat page in the future, it would not be as good as what he gained in these few days at the research base.

Talking about something on paper will never be better than seeing and understanding it in person.

……

Early this morning.

After Li Mu finished washing up, he did not continue exercising as usual.

Instead, he picked up his packed luggage and prepared to leave.

I have been at the research base for 4 days. I have learned almost everything I wanted to know, and it is time to leave.

Just when he was about to go out.

There was a knock on the door.

When the door opened, it was Zhang Yunhua and Shen Zhongyi.

The two looked at Li Mu with reluctance, but they also knew that it was impossible for Li Mu to stay.

It is their luck to be able to come here.

Zhang Yunhua took Li Mu's luggage and said regretfully, "If you, Consultant Li, could stay, I think we would be able to develop an atomic submarine in less than three years!"

He was not exaggerating when he said this.

With the help of Li Mu in the past few days, all the electronic components of the atomic submarine have undergone a comprehensive design upgrade.

According to their plan, this would take 3 to 4 months to complete.

"I'm reluctant to leave you all, but there's no such thing as a reunion that lasts forever. I hope we'll have a chance to work together again in the future." Li Mu said with a smile.

Shen Zhongyi said, "There is definitely such an opportunity. Consultant Li, if you can make a magnetohydrodynamic thruster, you can definitely make more advanced equipment!"

"That's right, the 3+2-axis CNC milling machine, this step you have taken can be said to give us the potential to surpass the world's top!" Zhang Yunhua also said.

Hearing this, Li Mu waved his hands and said, "Two Directors, please stop praising me, or I will be so proud that I will lose my mind!"

"Let's go quickly, otherwise everyone will get up and I'll have to trouble them to send me off."

"Is there a possibility?" Zhang Yunhua glanced at Li Mu with a half-smile, then took his hand and walked out the door, saying, "Everyone is here."

I saw that the downstairs of the dormitory was already full of people without me noticing.

……

The ship is big.

Inside the computer building that was just built this year.

Experts, professors and students in the field of computer technology from various universities and research institutions are discussing the application of CAD, CAM and CAE in one of the conference rooms.

Although at the beginning, they didn't quite trust Yang Tianxing and the other three.

But after these few days, I am completely convinced.

The problems that he and others could not solve were easily solved in front of the four people.

Especially the three softwares, CAD, CAM and CAE, amazed them.

From the time Huang Xinhua and others moved into the Shipbuilding Industry Corporation to the present, they have used software to complete the optimization and upgrade of more than 7 machines and equipment, the design of 3 new machines, and the planning of 5 projects.

It involves many fields such as steel production, civil machinery manufacturing, and construction.

This achievement is truly astonishing.

Normally, it would take them at least a year and a half to complete so many projects.

But now, it’s all done in just 5 days!

……

Outside the conference room.

Li Dazhang and his entourage walked to the door.

Listening to the president of Shipbuilding University's quietly reporting on the results, he couldn't suppress the smile on his face.

"In the long run, these five days of discussion will have a positive impact on the scientific, industrial and educational development of Sichuan and Chongqing," Dai Boxing concluded.

After listening to this, Li Dazhang's eyes became even more passionate when he looked at Yang Tianxing and the other three.

Such good results in such a short time.

If we can keep people here, it will undoubtedly be of great significance to the development of Sichuan and Chongqing.

"It's a pity that Consultant Li has not come yet, otherwise the results would be more and better." Li Dazhang said with a little regret.

Just a few ordinary researchers in the Semiconductor Research Institute can achieve such good results. If Li Mu came in person, he couldn't even imagine how far they could go.

Dai Boxing nodded in agreement and said, "The leader is right. It's a pity that Consultant Li didn't come!"

As they talked, they looked at Huang Xinhua who was standing behind them.

The latter looked helpless, he had been asked this question several times in these days.

But no matter how many questions he asked, he could only answer: "I don't know exactly when Li Mu will come, but don't worry, leader, he will definitely come."

"There's only less than a day left." Dai Boxing didn't know whether to laugh or cry, and said, "How about you extend the trip by a few days?"

Hearing this, Li Dazhang's eyes lit up.

Extending the trip is indeed a good idea.

"I'm afraid I can't make the decision on this." Huang Xinhua expressed helplessness.

Dai Boxing looked at Li Dazhang's eyes and instantly understood. He was ready to cooperate and let him express his position first.

I don’t ask for a lot, one or two days will be fine!

But at this moment, a commotion suddenly broke out in the conference room:

"Advisor Li, it's Advisor Li!"

"What? Which Consultant Li? Consultant Li from Kyoto?"

"Yes, it's him!"

……

The originally orderly meeting room suddenly became noisy.

The students stood up from their seats and looked around for Li Mu, wanting to see their role model in person.

Soon, everyone's eyes were fixed on Li Mu who was sitting in the corner.

The outfit he was wearing was exactly the same as the other college students who came to take the class for free, and it was easy to overlook it if you didn't look carefully.

(End of this chapter)