The car giant started by marrying the daughter of the king

Chapter 82 New BJ212 Design Finalized
After coming out of the Automobile Bureau of the First Ministry of Machine Building, Jiang Hui and Zhu Jiansheng did not ride their bikes back immediately, but found a restaurant nearby to have a meal first.

The father-in-law and son-in-law had a lot to discuss, so they just ordered two bowls of noodles and started eating.

"Xiao Jiang, Chief Engineer Zheng mentioned joining the 'Sanqi Preparatory Group'. I think you can consider it."

"Based on the scale of FAW and 2FAW, 3FAW will also be a vice-ministerial level enterprise by then. As a member of the preparatory group, you can at least be a section chief at 3FAW."

"And Sanqi's platform is higher than that of Capital Automobile Manufacturing Plant, so it has a bright future."

If we analyze the problem from Zhu Jiansheng's perspective, the conclusion we get will definitely be different from what Jiang Hui thinks.

After all, at that time no one could have imagined that the "Sanqi Preparatory Group" would eventually end up with a project being disbanded.

FAW First and Second Automobile Works were both built, so why did Third Automobile Works fail?

China's strength is getting stronger and stronger, so it stands to reason that the construction of these major projects should be getting better and better.

"Dad, if Sanqi can really be implemented, it will have a good future, but it will definitely not be built in the capital. Just for this reason, I won't consider it."

Jiang Hui did not immediately analyze the reasons why he did not go from other aspects, but simply considered it from the perspective of work location.

This idea is very normal in later generations, but in this era, relatively few people consider this issue right away.

At that time, many people went from the Northeast to support the construction of the Third Front, including the employees of Second Automobile Works, many of whom came from First Automobile Works.

Once the transfer order came down, everyone moved obediently.

Changing the place of work doesn't seem to be a big deal.

Of course, this is also related to the characteristics of each factory at that time.

Every factory is a small society, with residential buildings, hospitals, schools, cinemas, supply and marketing cooperatives, barber shops, etc.

The workers can live comfortably without having to deal with organizations and people outside the factory.

For them, migration is nothing more than changing from one place of living to another.

All issues such as accommodation, children’s schooling, etc. are transferred synchronously, so you don’t need to worry about them yourself.

These situations cannot be compared with anything in later generations.

"You are still young. Even if you want to leave the capital, it is not impossible to consider it."

"And the current situation is different from when Second Automobile Works was built. Third Automobile Works will definitely be located in some more important cities with more convenient transportation."

Of course Zhu Jiansheng was reluctant to let his daughter leave the capital, but compared with his son-in-law's future, some sacrifices were worth it.

"The new BJ212 has now officially entered a critical stage. Even if I am willing to go, the factory will not let me go."

After Jiang Hui said this, Zhu Jiansheng did not refute.

Because it's true.

Unless Jiang Hui is willing to make things very rigid, but if that happens, the result will not be good.

"During this period, everyone has been busy drawing. The design of the new BJ212 should be completed soon, right?"

Zhu Jiansheng has focused his main energy on writing the book "Automobile Design" in the past two weeks and has not learned about the specific details of the new BJ212.

All parties have high hopes for this product, and there is obviously no harm in paying more attention to it.

"It's almost done. The gearbox has already started mass production, and the engine drawings are almost finished."

"The design plans for some other important parts have also been finalized, and some drawings for the body and interior and exterior are being drawn up."

Jiang Hui shoveled the last mouthful of noodles into his mouth, wiped his mouth with his palm, and let out a light breath.

The noodles in this shop are really good. "The drawings have been drawn, and the design work is mostly done."

"However, various difficulties may arise in the production of samples in the next stage."

"You have to be mentally prepared for this."

Developing a new car model is not an easy task.

Zhu Jiansheng felt that he needed to remind Jiang Hui so that he would not be hit by the sudden setback.

This time, the new BJ212 is almost started from scratch, and most of the parts are designed with new regulations.

Many supporting factories have never encountered this situation before, and it is almost inevitable that they will encounter some problems during the production of samples.

So even though the drawing design work is going smoothly now, the time spent on sample production is estimated to be more than expected.

"The equipment of various domestic supporting factories is still too backward. If there are advanced equipment, the processing of many parts will be much easier."

"For example, if the engine block is cast and there is a CNC machine tool, the production efficiency and production accuracy can be improved by several levels."

"The machine tools jointly developed by the Capital Internal Combustion Engine Factory and the Beijing Second Machine Tool Factory waste a lot of time just changing the tool when machining a cylinder block, and the machining accuracy is not particularly ideal."

For the automotive industry, various machine tools and equipment are indispensable.

Stamping machines are needed to produce car body parts, injection molding machines are needed to produce interior and exterior parts, and die-casting machines, forging machines, lathes, grinders, milling machines and other machine tools are needed to produce many engine components.

There are also countless other special tooling equipment.

This requires the synchronous development of the entire equipment industry to truly enable the automotive industry to grow and develop.

In addition, the materials industry must also follow suit.

Otherwise, without qualified metal and resin materials, no matter how good your design drawings are, you will not be able to produce qualified parts.

For example, the A-pillar is designed to be as thin as possible to avoid affecting the driver's field of vision.

But if the strength of the steel plate does not meet the requirements, you will be taking human life lightly if you make it too thin.

The material requirements for various parts are different.

"Yeah, it's not a problem to describe it as a state of disrepair."

"However, the relevant departments have finally realized this and have begun to make changes."

Zhu Jiansheng could only comfort himself in this way.

Otherwise, what else can be done?

"I think so too. In the future, China's industrial development speed will definitely exceed everyone's imagination and bring great surprises to the world."

When Jiang Hui said this, he was full of confidence.

After eating the noodles, the two returned to the Capital Automobile Manufacturing Plant together to make final confirmation of the drawings drawn by the various supporting factories and draftsmen.

The two of them don't draw specific drawings of parts now, but instead share their ideas with others and let them draw them.

Otherwise it would be a waste of time.

While Jiang Hui was busy confirming the design drawings of the new BJ212, a group of special guests arrived at the Capital Airport.

Jiang Hui probably never imagined that these guests were actually related to him.

(End of this chapter)