Start with a photographic memory and build a memory palace

Chapter 326 Simplifying Complexity: Advanced Civilization Technology

……

The young man's forging is complete.

A piece of metal, meticulously forged by him, appeared in Wu Wen's hand.

Staring at what was before him, Wu Wen fell into deep thought.

The metal sheet in his hand has a unique internal structure that not only gives it extraordinary performance, but also forms a special energy circuit.

In a sense, it is like a crude chip.

If Wu Wen were to make it himself, he would naturally be able to complete it easily, given his abilities.

However, the person who forged this metal sheet was just an ordinary young man.

Although the forging process is completed in virtual space, the technology used is something that ordinary people can also perform.

The emergence of this "oscillating forging method".

This instantly gave Wu Wen a new idea.

The foundation of civilization's development lies in manufacturing.

Following standard procedures.

To alter the particle structure of a metal block and create unique properties and energy circuits, one must rely on advanced technology and a complete industrial system.

However, the "vibration forging method" seems to be a technology that could only be developed in a higher stage of civilization.

It enables people to create products that surpass the current level of civilization, even without a complete industrial system, solely through individual effort.

This is undoubtedly a technology that transcends civilizational classes!
This way.

The reforms of the Tang Dynasty no longer needed to be carried out in a step-by-step manner.

at this time.

In the virtual space, a forging table appeared in front of Wu Wen.

He picked up the forging hammer, aimed it at a heated iron block, and began to hammer it continuously.

In this process.

Wu Wen did not use any other abilities, but forged the iron block solely with his strength and skill.

Vibration forging method!

Wu Wen imitated the forging method of the young man and began to operate.

As he hammered, the internal structure of the iron block in front of him gradually changed.

However, during this process, the young man's vibration forging method gradually changed in Wu Wen's hands.

In Wu Wen's view, the vibration forging method he had learned must have a more profound part, or that what he had learned was incomplete.

Thus, through Wu Wen's deductions, this vibration forging method was gradually supplemented and perfected in his hands.

First, there is the improvement of power generation techniques.

The force with which an ordinary person strikes an iron block with a forging hammer is limited. If you want to make a deep change in the microscopic layer inside the iron block, you need to strike it with much stronger force.

Therefore, a technique is needed to amplify one's own strength.

The simplest technique for amplifying power is rotation.

In a sense, as long as the body can withstand it, the speed of rotation can be increased faster and faster, and the strength can be increased almost without limit.

Of course, this kind of power amplification burst through simple rotation is a one-time exertion.

Forging iron blocks is a continuous process.

Therefore, in addition to rotation, we need to further develop our skills.

Wu Wen held a forging hammer, steadily assumed a horse stance, his waist and stance becoming one, his upper body twisting, then returning to the original position, causing the forging hammer in his hand to rotate once.

Using the explosive force generated by the rotation, Wu Wen slammed the hammer heavily onto the iron block.

The force is mutual.

The forging hammer collides with the iron block, creating a recoil.

Using the recoil force from the forging hammer, Wu Wen made his body spin rapidly in place.

This is a process of releasing force, and at the same time, it is a process of using force to rotate and accumulate energy.

After spinning around once, Wu Wen slammed the iron block down heavily with his hammer again.

Although Wu Wen only spun once this time, the force with which he struck the iron block was twice that of his first strike.

The reason for this is that when Wu Wen initially spun, he used the force of the recoil to make his initial rotation speed faster than the first hammer blow.

Therefore, the power unleashed by the second hammer blow was double that of the first.

The forging hammer and the iron block collided violently again, the force of the hammering increased, and this time a greater recoil was generated.

Using this stronger recoil force, Wu Wen increased his initial rotational speed again, and then swung out his third hammer.

The force of this third blow was four times greater than that of the second blow. Following this method...

Wu Wen continued to forge and hammer.

He was like a spinning top, constantly rotating in both directions, with the speed increasing as he went.

However, Wu Wen himself did not experience much pressure during this process.

Because his body is at the center of the spinning top, the force he receives and unleashes is mostly concentrated on the hammer on the outer edge of the top.

Therefore, even with the hammering force increasing exponentially, Wu Wen was able to barely withstand it thanks to his body, which was only slightly stronger than that of an ordinary person.

If the force of the hammering is sufficient, then the angle, frequency, and other factors of the hammering also need to be taken into account.

Otherwise, it would be impossible to create a stable wave field from the vibration waves during the forging process.

This skill requires strong dynamic calculation ability and precise body control.

For example, at least the formula for centrifugal force needs to be known: force equals mass multiplied by radius, multiplied by the square of the angular velocity of rotation.

Therefore, a doubling of angular velocity can increase force by up to four times.

The direction of the reaction force and the angle of leverage, the angle between the reaction force and the direction of the applied force, need to be controlled within 30°~60° in order to be effectively converted into rotational kinetic energy.

The coupling between the rotation direction and the attack direction also needs to be handled cleverly.

When the forces are superimposed in the same direction, if the attack is clockwise (right-handed), the force should continue to accumulate by clockwise rotation after the counter-shock, forming a continuous acceleration.

When balancing in the opposite direction, if continuous attacks cause rotational imbalance (such as left-hand overload), it is necessary to instantly reverse the rotation (counterclockwise) to counteract the inertia and avoid loss of control.

……

……

These complex things were naturally extremely simple for Wu Wen, and he could handle them with ease.

Therefore, Wu Wen continued the forging process.

During this process, he looked as if he were dancing, and the sound of the forging hammer striking the iron block was like playing a beautiful melody.

His movements and voices were perfectly combined, and a wonderful melody slowly emerged from his body.

Thus, under Wu Wen's skillful execution, the forging process resembled a spectacular performance.

As the performance came to an end.

Wu Wen also completed the forging.

He put down his forging hammer and watched the iron block he had hammered and forged slowly cool down.

The shape it exhibits is that of a multifaceted crystal with 360 facets, which has been polished a million times and has a metallic luster.

Wu Wen gently picked it up and placed it in his hand.

Under his investigation, it was a technological work of art with unparalleled precision.

Just then, a beam of light shone down from above and landed on the polyhedron.

Instantly, the polyhedral crystal seemed to be activated, its internal energy circuits began to operate, and its surface emitted a faint blue light.

Photoelectric effect!

The polyhedral crystal that Wu Wen forged has a special internal structure that enables it to undergo photoelectric reactions.

At this moment, it is an energy engine.

Its function is to convert light and electricity into energy.

However, Wu Wen's mind was not entirely focused on the perfect masterpiece in his hands at the moment.

Instead, he reflected more on the wondrous state he had just entered during the forging process.

Vibration forging method!

It may seem like just simple hammering, but the techniques and knowledge involved are extremely complex.

Because of my superior strategic vision, I was able to execute it so easily.

However, if it were an ordinary person to perform this, one can imagine how difficult it would be.

but!

Besides mastering and learning complete forging knowledge, there is another way to practice this forging method: mastering the rhythm and melody of forging.

It's like driving a car. You don't need to know how the vehicle works; you just need to master driving skills to get the car moving.

Therefore, to perform the vibration forging method, it is not actually necessary to master its logical principles.

All you need to do is get yourself into that state.

Just as cultivation teaches, it's about entering a state of mind.

This allows for the perfect execution of the vibration forging technique.

This is how such exquisite "works of art" are created!
……

(End of this chapter)