talisman sky

Chapter 2899 Casting Furnace Forming

However, softening is just the beginning. Even if the refractory stone is metallized, its fire resistance is still terribly high.

Under Ye Li's control, the ground fire perfectly wrapped the metalized infusible stone, and its surface was burned redder and redder by the fiery heat.

Half an hour later, the infusible stone finally showed signs of melting, and a little bit of molten metal dripped down from the surface of the infusible stone.

Ye Li felt that the metallized infusible stone showed no signs of reverse transformation, which means that the effect of the golden liquid will last for a long time, and the infusible stone will not petrify in a short time.

Feeling the changes of the infusible stone, Ye Li finally breathed a sigh of relief, as long as the infusible stone can melt, then everything is fine.

It took a full hour for this huge infusible stone to finally melt into a ball of crimson juice.

Ye Li casually threw the two horns of the Great Scarlet Flame Jiao into the flames, and then threw various auxiliary materials, as well as Feng Xing, Wood Xing and Yang Xing materials into the fire one by one.

The flames licked all kinds of materials, the rich and pure ground fire was extremely hot, ordinary materials could not resist the power of the flames, and in just a quarter of an hour, all the materials were melted into juice.

After melting, it is the process of fusing various materials, which requires the spiritual power of the talisman master to be strong enough and the control ability to be fine enough.

Only in this way can the various materials be perfectly separated and evenly blended together.

Let the patterns of all materials blend together, and the characteristics of each other can be perfectly combined.

If the fusion is not uniform and the materials are not evenly distributed, the difference in hardness on the surface of the cast furnace alone is enough to cause the entire furnace to shatter when it cools down.

Moreover, uneven materials make it difficult to guide the formation of the rune formation, which basically means that the casting has failed.

As a master caster, Ye Li naturally understands this very well, so he has completely focused on the ground fire in front of him at this time, manipulating the material juice to spin rapidly in the flame.

The high-speed rotation of the juice turned all the juice into vortices, and finally blended together.

Each material is slowly combining with other materials, wrapping and interweaving each other.

In the end, a mass of crimson pure and uniform liquid appeared in front of Ye Li.

Ye Li raised a slight smile at the corner of his mouth, he knew very well that all the materials had been perfectly blended together.

Now is the time for shaping, and a shape of a casting furnace appeared in Ye Chui soon. This is a casting furnace in the shape of a square tripod. The furnace is square and supported by four legs. At first glance, it looks like a square. tripod.

The shape of Fang Ding is very simple, which can also save Ye Li a lot of time. After all, if Ye Li wants to create a unique casting furnace, it will definitely consume a large part of his time.

Ye Li is very clear that the effect time of the golden liquid cannot be too long. If he can't complete the casting furnace within a few hours, once the golden liquid fails, the casting furnace will be finalized immediately, and he will not be able to In the hardened Fang Ding, if the direction of the pattern is changed, the casting furnace will be completely scrapped.

Among these materials, other materials are easy to talk about. Infusible stone is really hard to find. If this piece of infusible stone is lost, Ye Li really doesn't know where to find another one of this size.

After the quick shaping, Ye Li immediately put on his full energy and began to speed up the formation of the motion guide lines.

In this casting furnace, the effect of the power of fire is not the most important, because the main flame used by the furnace is the ground fire, and the flame produced by itself is used when there is no ground fire.

The purpose of Ye Li's use of the two horns of the Great Scarlet Flame Dragon is because the two horns of the Great Red Flame Dragon have the property of gathering fire, which has a strong effect on gathering ground fire.

After guiding the fire-gathering formation and fire-generating formation of the fire line, Ye Li opened the eye of the beginning again. The formations of other attributes are auxiliary functions, so they need to be combined with the fire formation.

The more auxiliary formations connected around the main body, the more complex it will be.

Ordinary casters, the main rune formation is surrounded by auxiliary formations of one attribute at most, but Ye Li intends to connect three auxiliary formations to the main rune formation.

The auxiliary arrays of Feng Xing, Mu Xing and Yang Xing are all for the purpose of exerting the power of Fire Xing to the end. Ye Li relies on the effect of the Eye of Shiyuan to draw these three arrays to the most perfect state .

Of course, with his current casting level, even without the help of the Eye of Primordial Origin, he can draw the formation extremely perfectly.

It's just because Ye Li attaches great importance to Mietian Gong and is unwilling to make any mistakes in the casting furnace, so he activates the Eye of the First Yuan to make all the preparations as perfect as possible.

With the help of the Eye of Primordial Origin, the pattern of the casting furnace was guided to be drawn at an extremely fast speed.

An extremely complicated and huge rune formation gradually took shape in Fang Ding.

Every rune line appeared in the most perfect place. Ye Li's ability combined with the special effect of the Eye of Primordial Origin allowed him to exert the power of the caster to the extreme.

After almost two hours, the rune formation was finally completed.

At this time, Fang Ding also began to show signs of petrification again, the effect of the golden liquid was gradually disappearing, and the infusible stone would return to its original appearance.

Although the nonmelting stone at this time has been mixed with other materials, it still plays the most important role as the main body.

The gradual petrification of the infusible stone automatically lowered the temperature of Fang Ding.

The crimson color on Fang Ding began to disappear slowly, as if it was gradually cooling down.

At this time, Ye Li did not extinguish the flame as in the last step of the ordinary casting process. Instead, he frantically activated the power of the earth fire in the formation to burn the Fang Ding, which gradually became dim in front of him.

The non-melting stone is indeed the non-melting stone, even such a violent ground fire can't shake Fang Ding at all.

The burning of the flames did not cause even the slightest change on the surface of the square tripod. The gray-black casting furnace remained motionless in the flames, and the flames looked very powerless in front of the infusible stone.

For this, Ye Centrifuge is very satisfied, because he knows that when the power of the flame in the casting furnace is fully exerted, the temperature will be even higher than the previous ground fire.

At such a high temperature and long-term calcination, ordinary casting furnaces are absolutely unbearable. The rune array in the furnace will lose its effectiveness due to the gradual deformation of the furnace body, and the casting will also stop because of this. .

Now there is a casting furnace made of infusible stone, no matter how high the temperature of the flame is, the furnace will not be damaged because of it, and no matter how long the casting process of Mie Tian Gong lasts, there will be no problem.

(End of this chapter)