The black tech madman who saves the world

Chapter 104 Robot Multi-Armed Crab (56 Explosions!)
After tossing for a long time, everyone ate and drank well, and Chen Mengchuan and Toni began to arrange connection nodes.

The advantage of the origin connection joint is that the flexibility of the robotic arm can go far beyond ordinary single-axis rotation, and each node can be flexibly manipulated at various angles, which is very convenient.But this kind of flexibility has a big requirement, that is, the metal wear-resistant balls at the joints must be sufficiently hard and tough.Because every flexible movement will bring a lot of pressure, the more joints, the greater the pressure on the joints.

Under such high-intensity pressure, the quality of the wear-resistant ball of each joint has become the most important core part.Chen Mengchuan chose Tenglong Special Steel Works for the acquisition at the beginning because the wear-resistant balls of this special steel plant are very famous in the whole of China, no matter in terms of output or quality.

Soon, after the first session was connected, Chen Mengchuan started the control system that Achen had set up, tried to operate it, and the effect was perfect!

A group of people happily assembled all the 6-section robotic arms quickly, and then started the test.

Under Ah Chen's operation, the first 6-node origin robotic arm was completely presented in front of everyone, and its flexibility was unimaginable!
A burst of cheers resounded throughout the laboratory.

They finally completed China's first 6-node origin robot arm, which is also the world's first true 6-node origin robot arm!The blueprint that was once on the table was finally completed by them!
Many people wept with joy, including Toni. He took off his glasses, silently looked at the 6-node origin robot arm in front of him under the operation of Ah Chen, and burst into tears.

Chen Mengchuan took out the tablet and asked Chen, "Chen, what is the computing power of the robotic arm?"

Ah Chen replied: "The current single-arm calculation capacity is not high, and it is very interesting to control. Father, please prepare a few more robotic arms for Ah Chen."

Chen Mengchuan nodded with a smile, greeted the excited crowd, and began to assemble the second robotic arm.

With the experience of the first one, the assembly process of the second robotic arm is much faster. It didn't take long for the second 6-node origin robotic arm to be assembled.

Ah Chen was very happy controlling the two robotic arms.

Toni and a kind of engineer installed multifunctional mechanical tools for the two mechanical arms, and then started Achen's automatic installation program.

The crowd began to look at the two robotic arms in shock, and quickly and accurately spliced ​​the third robotic arm little by little. It took only half an hour to complete the splicing of the third 6-node origin robotic arm, and The degree of completion far exceeds the first and second ones.

"Achen, repair the missing installation of robotic arms No. 1 and No. 2." Toni pushed his glasses and said.

"Okay, Dad Toni." As Chen said, he quickly dismantled the No. 1 robotic arm and reassembled it.After that, the No. 2 mechanical arm was disassembled and reassembled in the same way.

The three 6-node origin robotic arms under the control of Ah Chen surpassed the scalpels in the hands of the world's most accurate shell surgeons. They are precise, stable, and fast, without any unnecessary movements. The entire assembly movement is smooth and natural!
The first batch of parts brought by Sun Zhongyong included 9 sets of 6-node origin robotic arms.Achen quickly assembled all nine 9-node origin robotic arms under the instructions of Chen Mengchuan and Toni.

"True unbelievable efficiency!" exclaimed Toni.

Chen Mengchuan nodded with a smile, took out his phone, and called Sun Zhongyong.Let him send all the parts from Tianzhi Special Steel Plant.

Then the two stopped Ah Chen and went to find Zhou Kai and Gu Xiaoxiao.

The Haima supercomputing laboratory is not far from the robotic arm laboratory, and the two quickly found Zhou Kai and Gu Xiaoxiao.

"You want to make a central control core? Use a small supercomputer to control 8 robotic arms?" Zhou Kai was a little shocked by the thoughts of Chen Mengchuan and Toni.

Chen Mengchuan nodded with a smile: "The volume should be smaller, not too large, and it should be able to run stably and have a good heat dissipation function. Finally, it must be able to support the peak computing power of 8 robotic arms."

Zhou Kai pondered for a while, and found a group of IBM engineers.

After learning about Chen Mengchuan's idea, a group of people became interested and started discussing it.

Because there are currently 10000 supercomputing computing nodes in reserve in Haima's supercomputing laboratory as replacements, so these can be temporarily used for experiments.

Realizing that there may still be a large demand in the future, Chen Mengchuan asked Gu Xiaoxiao to place an order to buy another 10 supercomputing nodes.

Two days later, an IBM engineer finally came up with a design.

A hive of small supercomputer nodes.

The volume is about 7 or 8 cubic meters, and it is extremely heavy. It initially meets the needs of Chen Mengchuan. It uses 198 supercomputing computing nodes and adopts segmented cooling, just like hanging two refrigeration air conditioners on it.

This amount of calculation is enough to support 12 6-node origin robotic arms.

After Chen Mengchuan and Toni obtained the plan, they immediately returned to the robotic arm laboratory and started calculations. Finally, they came to the conclusion that eight 8-node origin robotic arms of the Big Three must be used to support such a heavy computing core. .

A group of people cooperated with Ah Chen again to design a new plan.

This new solution uses 8 4-node origin mechanical feet on the ground as support, and 8 6-node origin robotic arms are connected to the main control.In this way, the manipulator can have sufficient movement force under the condition that the remote calculation amount of the robot arm is sufficient.

The computing core uses the volley 1.0 power supply system, which can support 89 meters of wireless power supply and support the continuous operation of the robotic arm.

Soon after the new mechanical octopus design came out, it looked very strange.

It looks like a large spider with 8 tentacles growing on its back.

"Come up with a name, Mengchuan." Toni pushed his glasses and spoke first.

Seeing such a complicated and somewhat ugly mechanical octopus, Chen Mengchuan was very embarrassed, and quickly said modestly: "No, no, Toni, you contributed more to this project than me, and the naming rights should belong to you."

"Are you sure?" Toni smiled.

Chen Mengchuan nodded seriously.

Toni thought about it seriously, and said, "Then it's called the universe super invincible ultimate mutant 16-armed sci-fi spider octopus!"

Chen Mengchuan: "..."

"I'm just kidding, let's call it a robotic multi-armed crab," Toni said.

"Many-armed crab?" Chen Mengchuan smiled, but the name is still normal.

Toni nodded: "Crabs are decapod. Eight crab legs support the body. Two crab claws are their defense and attack tools, which can also be regarded as the crab's arms."

"Okay, then I'll listen to you, call it a multi-armed crab." Chen Mengchuan smiled.

　Chapter 5!Continue to erupt later!
　　
　
(End of this chapter)