Cities: from Heavy Locomotives to Industrial Overlords

At this time, Su Qin was inspecting the workshop of Feiyue Automobile.

After all, the success or failure of Feiyue Automobile is too important.

It is related to the next development of Feiyue Group.

With the rapid development of automotive technology, especially artificial intelligence, a car is not simply a sofa 170 plus four wheels.

It is a tedious and long process from R&D and design to mass production of a car to sell to consumers.This includes five main stages: market research, conceptual design, engineering design, prototype test, and mass production.

The manufacturing process of automobiles is mainly divided into five processes: stamping, welding, painting, final assembly and testing.

That is, the four major processes and inspections of automobiles.

The first car produced by Feiyue Motor this time is equipped with graphene batteries and L5-level autonomous driving technology.

So the production process is slightly longer.

Therefore, the relevant workers of Feiyue Motor are working overtime day and night to prepare.

Now the first step that Feiyue Automobile has made is the final assembly.

Final assembly is the last link of the four major processes of automobile manufacturing.

The final assembly line mainly includes interior line, chassis line, exterior line and so on.

The wiring harness, door, dashboard, engine, front and rear axles, electronic and electrical tires and other components are generally installed. The main purpose is to assemble the body, chassis, electronic appliances, interior and exterior trim and other parts together to form a complete car. .

in the workshop.

Su Qin nodded slightly as he watched the workers busy assembling a car.

At this time, the outline and general appearance of the first Feiyue car have come out.

Su Qin is very confident about Feiyue Automobile.

Once listed, it will definitely detonate the market.

Guan Lin said, "Mr. Su, we are in final assembly now, because it uses automatic driving technology, so it will take a little longer!"

Su Qin said, "The East China Sea International Auto Show is more than a month away, and we don't have much time."

"The prototype must be built within a month!"

At the Donghai International Auto Show, Feiyue Automobile produced a total of two prototypes.

Because they are all produced on the assembly line, the construction period is similar.

Guan Lin nodded and said, "Well, I'll work overtime and try to finish the final assembly within 20 days, leaving more than ten hours for testing."

The main purpose of the car is to find out the quality problems existing in the production and assembly process of the auto parts, such as the motion of the transmission mechanism, and the abnormal noise of the powertrain ignition.

Including checking the parts and lubricating oil on the surface of the car, performing four-wheel alignment inspection and sealing performance test, etc., to ensure that all functions are normal.

Cars that pass the test generally need to be tested on various roads in the factory, and sometimes they need to be evaluated on the test road in the factory to ensure that the performance and functions of the vehicle meet the requirements.

This also takes time.

If all goes well, that's fine, but if something goes wrong, there's simply not much time to adjust and repair.

Su Qin thought for a while and said, "20 days is too long, no, at most 15 days, the first car must be completed within 15 days!"

Guan Lin said, "Mr. Su, we have always been in a hurry. In addition, there are many cameras, radars and other sensors to be installed in the L5-level autonomous driving technology, so I am afraid that there is not enough time."

Autopilot technology includes video cameras, radar sensors, and laser rangefinders to understand surrounding traffic and navigate the road ahead through a detailed map.

Therefore, in order for Feiyue cars to realize autonomous driving, the installed cameras, radar sensors, laser sensors, ultrasonic sensors, etc. are all essential.

These are all time-consuming.

Su Qin looked at Guan Lin and said, "Old Guan, we don't have much time. We can only make workers and engineers work overtime."

"Don't worry, if the first Feiyue car rolls off the assembly line, I won't treat these workers and engineers badly!"

"We have to have a car off the assembly line in 15 days, then 5 days for testing and testing, and finally 10 days for the finishing touches!"

"If a problem is detected, then we can fix the adjustment."

"If the test is OK, then we'll have to perfect our first car!"

Generally speaking, in the production process of a car, there must be more or less problems.

As long as it's not a big problem, then it's not a problem.

Guan Lin gritted his teeth and said, "Okay, Mr. Su, since you said so, then I will work harder and try to take Feiyue off the assembly line within 15 days."

"Mr. Su, the East China Sea International Auto Show is a big international auto show. If our Feiyue car can make an appearance at this international auto show, it will be absolutely amazing."

Su Qin nodded: "Yes, that's why I asked you to work overtime to make our first Feiyue car!"

"The Donghai International Auto Show is a very important node, and we must catch up."

Although it is said that the Donghai International Auto Show is held once a year.

But Su Qin didn't want to wait until next year!

There is more than a month left, and the Donghai International Auto Show is here!

Feiyue Automobile must make a shocking debut on such an international stage!