Song Dynasty: Yuan Dynasty, you didn't expect this, did you? I'm still alive.
Chapter 145 Mystery
Let's go back to the 28th year of Xingwei (1376).
At this time, Zhao Yu was waiting for the construction of the Indian railway to proceed, temporarily halting his campaigns and enjoying a rare period of leisure in his life.
However, Zhao Yu was not one to be content with a quiet life. Before long, a worry began to weigh on his mind. Although he had never suffered a defeat in his campaigns on the grasslands, the core strength of his army ultimately depended on the grassland cavalry. While his own dragon cavalry was more than capable in defense, they were always lacking in pursuit.
The key issue is that when cavalry are pursuing on horseback, the loading process of the muzzle-loading flintlock musket is extremely cumbersome and difficult. Once they are engaged in close-quarters combat, its combat efficiency is even lower than that of traditional bows and arrows.
Zhao Yu knew that his army urgently needed a gun that could be quickly loaded and fired on horseback to make up for the shortcomings in pursuit operations.
Soon, Zhao Yu conveyed this requirement to the Gewu Academy and the Military Equipment Bureau, ordering them to work together to design a musket suitable for cavalry that could be quickly reloaded on horseback.
As the biggest financial backer of the Gewu Academy and also the emperor of the Eastern Song Dynasty, his request was immediately listed as a top-level research and development project, and the two academies worked together to promote it.
This scene is a stark contrast to Timur's predicament when he struggled to find even qualified craftsmen to replicate his muskets.
The Eastern Song Dynasty had a strong industrial base and a wealth of skilled craftsmen. What was even more remarkable was that, compared to the craftsmen in Central Asia who relied entirely on experience, the craftsmen of the Eastern Song Dynasty generally had a higher level of education, which made their growth rate vastly different.
For the same technical step, an ordinary craftsman might need to spend decades to figure out the tricks of the trade through accumulated experience; while a craftsman from the Eastern Song Dynasty who understood mechanics and geometry could often grasp the core principles and master the skills in just a few months.
Take rifling as an example. Ordinary craftsmen can only use a lever with a blade to pull back and forth inside the barrel by feel. The depth, angle, and twist of the rifling are all controlled by experience and muscle memory. It often takes several years for a skilled craftsman to truly master this craft.
However, in the Eastern Song Dynasty, craftsmen skilled in geometry used a more scientific method to solve the problem: they first calculated the optimal twist rate using formulas (such as "one meter for one revolution"), and then designed a rifling machine with a fixed guide rail. The angle of the guide rail was precisely fixed, and the cutter moved at a constant speed along the guide rail, resulting in rifling of consistent depth and uniform twist rate with minimal error. Once the first barrel was successfully tested, subsequent barrels only required repeating the same operation. New craftsmen only needed to understand the blueprints and learn to operate the machine to be able to produce qualified rifling in a few months, without needing to undergo ten years of arduous training like traditional craftsmen.
Take the design of the Minié bullet, for example. Ordinary craftsmen often had to burn thousands of bullets, repeatedly experimenting and adjusting to find the right "bottom concave depth" and "iron plug shape," which was time-consuming and labor-intensive. However, the mechanical craftsmen of the Eastern Song Dynasty, upon receiving a request, would directly take out paper and pen and solve the problem through precise calculations: they would first calculate the chamber pressure generated by the propellant, then estimate the radial force required for the bullet's expansion, and combine this with the yield strength of lead to deduce the optimal depth and taper of the concave hole, ensuring that the bullet expanded precisely to fit the rifling under chamber pressure without causing the barrel to explode due to excessive deformation. They would even consider the speed and pressure distribution of the propellant gases entering the concave hole, optimizing the shape of the concave hole to make the bullet's expansion more uniform.
This process doesn't require firing hundreds of bullets for trial and error. After calculating clearly on paper, a batch of samples is made for verification, and minor adjustments are made to finalize the design. It takes only a few weeks, rather than the years required by traditional craftsmen. Not to mention, for core projects involving military research and development, ordinary technical workers are no longer in charge of the design.
The person in charge of designing the new musket was a master alchemist and weapon crafter from the Gewu Academy, whose Daoist name was Xuanjizi.
Upon learning of this, Prime Minister Xu Xiuyuan, a scholar of Taoism, fully cooperated with the research and development work. All relevant data from the Ministry of Works and the Ministry of Revenue were made fully available to Xuanjizi's research and development team, clearing away all obstacles for the research and development work.
After receiving the imperial decree, Xuanjizi devoted himself to research, focusing on Zhao Yu's needs. The explicit requirement was to develop a musket that could be quickly reloaded on horseback; the implicit requirement was to control costs and increase production to ensure that it could meet the needs of large-scale military equipment.
He first identified the key issues preventing existing flintlock muskets from being loaded on horseback: firstly, the musket was too long, making loading from the muzzle inconvenient, and the jolting motion on horseback only exacerbated the problem; secondly, the operation was cumbersome, and errors were easily made during the jolting. However, simply shortening the barrel would significantly reduce the weapon's power, creating a dilemma.
However, Xuanjizi quickly came up with a solution—adopting a rear-loading design with fixed ammunition.
In this way, soldiers on horseback no longer need to perform the cumbersome process of loading the muzzle; they can simply load the fixed ammunition quickly to complete the firing. This not only greatly improves efficiency but also effectively avoids the problem of gunpowder leakage caused by bumps, perfectly meeting the needs of cavalry warfare.
The idea is good, but is it technically feasible?
Rear-loading ammunition requires extremely high airtightness between the barrel and the cartridge case, which necessitates high-precision components for support.
Coincidentally, the Eastern Song Dynasty had invented precision machine tools more than a decade earlier, and they had already been widely used in the arsenals of the Military Equipment Bureau and the Royal Chamber of Commerce. The problem of producing high-precision parts was solved instantly.
Having solved the loading method problem, a new question arises: how should fixed ammunition be manufactured?
Xuanjizi immediately thought of the metal casing—if the cartridge case were made of metal, it would not only perfectly meet the official's requirement of "immediate and rapid loading", but also exceed expectations, completely isolate the firearms from the effects of rainy weather, and prevent the gunpowder from becoming damp and ineffective.
However, metal cartridge cases require extremely high energy from the gunpowder, which ordinary black powder cannot meet. Only smokeless powder (nitrocellulose) or nitroglycerin can achieve the required power.
To produce one ton of nitrocellulose gunpowder, approximately 1.5 tons of high-quality cotton, 3 tons of concentrated nitric acid, and a large amount of concentrated sulfuric acid are required.
Xuanjizi immediately consulted the relevant data from the Ministry of Works and investigated the raw material supply issues one by one.
There was no need to worry about cotton supply, as the Eastern Song Dynasty had countless slaves cultivating cotton on a large scale in plantations across the country, ensuring ample production. There was also no need to worry about concentrated sulfuric acid, as the Eastern Song Dynasty had already achieved large-scale industrial production, mainly using the lead chamber process, with sulfur and saltpeter as the raw materials.
Japan has many volcanoes and is rich in sulfur; India, Persia and Central Asia also have abundant sulfur or pyrite deposits, which can make them completely self-sufficient.
As for nitrate, a large nitrate mine was discovered a few years ago in Chile near Peru, with reserves far exceeding those of nitrate mines in India, ensuring a completely worry-free supply of raw materials.
The real problem lies with concentrated nitric acid.
Although the Eastern Song Dynasty was able to produce nitric acid on an industrial scale at that time, it used the saltpeter process. To prepare ordinary nitric acid into high-concentration concentrated nitric acid, many complicated processes were required, and these processes had not yet been industrialized.
According to data provided by the Ministry of Industry, even with all efforts, only 1000 tons of concentrated nitric acid could be produced annually, enough to supply only 300 rounds of ammunition for 15 muskets per year.
It seems barely enough, but it not only costs a lot of money, but also requires sacrificing other production capacity that requires concentrated nitric acid.
More importantly, although Xuanjizi had never been on the battlefield, based on his understanding of war, he felt that a musketeer equipped with only 300 rounds of ammunition a year was far too weak in terms of firepower and completely unable to meet the demands of high-intensity warfare.
The production of nitroglycerin also requires concentrated nitric acid, so this approach is also not feasible.
Left with no other choice, Xuanjizi had to abandon the metal cartridge case and opt for black powder, which was cheaper and had more readily available raw materials.
However, this would prevent the use of a metal casing, which made Xuanjizi, who was a perfectionist, feel somewhat uncomfortable. But he quickly came up with a compromise: using a paper casing, immersing the finished ammunition, either wholly or partially, in molten paraffin or beeswax, and then quickly removing it to cool.
In this way, a thin waxy protective film will form on the surface of the cardboard, just like putting a transparent "raincoat" on the bullet. Although it cannot prevent moisture for a long time, it can effectively cope with short-term rainy weather and meet the basic needs of the battlefield.
The last problem to be solved is the ignition method of fixed ammunition.
In fact, Xuanjizi had already considered this idea, and the answer was to use mercury fulminate as the base fire.
Gewu Academy originally started by studying chemistry. Mercury fulminate, an explosive, had long been discovered, but its production was limited by the availability of concentrated nitric acid.
Fortunately, the amount of mercury fulminate required for the primer is extremely small, only 0.03 grams per bullet, and the existing production capacity of the Eastern Song Dynasty was fully capable of meeting the needs of large-scale equipment deployment.
After a period of seclusion and in-depth research, Xuanjizi finally came up with the final design plan—a breech-loading bolt-action musket with rifling and paper-based fixed ammunition.
He named this new type of firearm "Xuanji Needle Gun" (its design is similar to the Dreiser needle gun of later times).
This musket cost 25 taels of silver to manufacture, and 100 rounds of ammunition cost 5 taels of silver. It was extremely cost-effective and suitable for large-scale military deployment.
Its maximum range can reach 600 meters, and within a range of 200 meters, it can easily penetrate the most advanced armor of the time. Although its range is slightly inferior to that of a muzzle-loading flintlock musket with Minié bullets due to the airtightness of the breech-loading design, its rate of fire reaches a terrifying 5-12 rounds per minute. Well-trained soldiers can even achieve a rate of fire that is 5-6 times that of a traditional muzzle-loading musket.
Its greatest advantage is that soldiers can quickly load and fire in various positions such as lying down, concealed, and on horseback, perfectly meeting Zhao Yu's core requirements for cavalry firearms.
You'll Also Like
-
Hunter x Hunter: Infinite Growth
Chapter 932 45 minute ago -
Covering the Sky: I Created the Devouring Heaven Demon Art in the Mythical Era
Chapter 1075 45 minute ago -
The Wittrum of the Marvel Universe
Chapter 217 45 minute ago -
Digimon: I reached the top using the Knight item.
Chapter 523 45 minute ago -
The Black Detective of the Detective Conan World
Chapter 1005 45 minute ago -
Food Wars: Starting with Equipping the Greedy Wolf Pot
Chapter 123 45 minute ago -
On the first day of school, the school beauty in black stockings took me to a hotel.
Chapter 281 45 minute ago -
She regretted divorcing the female CEO.
Chapter 513 45 minute ago -
A bizarre blind date: spending money on the beautiful woman's mother can be a major shock.
Chapter 314 45 minute ago -
Stop crying, I'll give it to you, okay?
Chapter 441 45 minute ago