Reborn in 1982: I Became the Richest Man by Repairing Cars

Chapter 101 Ingenious Craftsmanship, Showcasing Masterful Skill

Chapter 101 Ingenious Craftsmanship, Showcasing Masterful Skill (Please Subscribe)

Not long after, Zhao Yaru came out of the storeroom in the backyard.

He held a roll of asbestos board and a small stack of copper sheets in his hand and placed them on the counter.

"We charge for asbestos sheets by the foot here, 25 cents per foot. A single cylinder head gasket for a Jaguar XJ6 takes about 1.5 feet."

"If it's 10 truckloads, I'll charge you 16 feet, which is 4 dollars in total."

She then pointed to the copper sheet: "The copper sheet is sold by the sheet, and one sheet can be cut into three Jaguar cylinder head gaskets."

「10台车大概需要4张,每张8毛,4张就是3块2。」

"That's 7.2 yuan in total, how about that?"

What can we do?

Jiang Hui immediately nodded: "Okay, Sister Yaru, we'll do it your way."

As he spoke, he took out some money from his pocket, counted out 7.2 yuan, and handed it over.

Zhao Yaru took the money, casually stuffed it into the drawer, and then found two brown paper packets to wrap the asbestos board and the copper sheet separately.

"It's all wrapped up for you. The asbestos board is soft, so be careful when you handle it and don't break it, as it's not easy to cut."

"The copper sheet I chose for you is of moderate thickness, easy to cut, and durable."

"Thank you for your thoughtfulness, Sister Ya-ru."

Jiang Hui took the paper package and bowed to Ma Jiancheng, saying, "Director Ma, thank you so much today. If it weren't for your reminder, this job would have really fallen through."

"Once the Jaguar is fixed, I'll come over and invite you guys to dinner again."

Ma Jiancheng waved his hand and said with a smile, "It's nothing. If you can get the job done, just come and support our store more often in the future."

"By the way, be careful when cutting. Jaguar is a high-end car, and the holes in the cylinder head gasket must be in the correct positions."

"Otherwise, if it leaks engine oil or water after installation, it will cause a lot of trouble."

"Don't worry, Director Ma, I know what I'm doing."

Jiang Hui smiled and agreed, "Then I won't delay any longer. I'll go back and make the cylinder head gasket as soon as possible. They need to come over to repair the car this afternoon."

"Okay, you go ahead with your work. If you need anything, just come and find us anytime."

Zhao Yaru added from the side.

It seems the last meal went very well.

Jiang Hui responded, picked up the materials, quickly walked out of the store, mounted his old bicycle, and braved the cold wind to head to the repair shop.

In less than an hour, we were back at Xiao Jiang's Auto Repair Shop.

Lin Yuanwu was standing guard at the door, looking around. When he saw him return, he immediately went to greet him.

Inside the shop, Fan Weimin and Li Shigui had already returned.

The two were sitting on a bench in the corner, their faces full of worry, clearly having failed to find the item.

"Jiang Hui, you're back!"

"Master."

When Fan Weimin saw Jiang Hui enter, he immediately stood up, his tone full of disappointment and urgency, "The place I went to didn't sell Jaguar XJ6 cylinder head gasket spare parts."

Li Shigui also stood up, shaking his head helplessly: "Master, I couldn't find it over there either."

"The city's auto repair company's parts station checked the records and said they had never received any Jaguar spare parts; they only supplied parts for domestically produced cars and Eastern European cars."

"There are no spare parts available for the Yingjili car. The staff even said that there are only a few of these cars in the capital, so there is no need to stock them."

Jiang Hui smiled and patted Fan Weimin and Li Shigui on the shoulder, reassuring them, "It's okay, I couldn't find the original parts either."

"There are only a handful of these Jaguar XJ6s in the entire country, so it's normal that spare parts are hard to find."

"Then—what should we do?"

Lin Yuanwu asked anxiously from the side.

"Although we couldn't find a spare part, someone pointed us in a good direction: we'll make our own cylinder head gasket!"

"These are the asbestos sheets and copper sheets I bought; they're the materials for making cylinder head gaskets."

"Make it yourself?"

Lin Yuanwu's eyes lit up, and he leaned closer. "You can make this yourself?"

"Why not? In the past, when imported cars didn't have spare parts, old mechanics would do it this way."

As Jiang Hui unpacked the kraft paper package, he said, "I know the structure of the Jaguar XJ6's cylinder head gasket, and I can finish it quickly."

As he spoke, he rummaged through his toolbox and pulled out the various tools he needed.

A sharp pair of scissors, several nails of different thicknesses, a measuring tape, a pencil, a compass, a ruler, and a bottle of cylinder head gasket adhesive.

Next, Jiang Hui went back to the small courtyard at the back, found a table by himself, and started working.

Sometimes, maintaining a degree of mystery is not a bad thing.

Otherwise, it would be difficult to explain why I am so familiar with the parameters of the Jaguar XJ6's cylinder head gasket.

The engine hasn't even been disassembled yet.

Jiang Hui thoroughly digested the information about the cylinder head gasket in the system, spread out the asbestos board on the table, and began to work.

In less than half an hour, he quickly sketched the outline of the cylinder head gasket with a pencil.

Anyone who has studied mechanical drawing in university knows that this speed is definitely considered very fast.

Within this outline, the lines are smooth, the edges are neat, and even the positions of the waterways and oil channels are marked with perfect accuracy.

Then he picked up the scissors and slowly cut along the outline drawn in the pencil.

Asbestos boards are relatively soft but very resilient. When cutting them, you need to apply even force and ensure that the edges are flat and free of burrs.

Jiang Hui's fingers were nimble; with each rise and fall of the scissors, the excess asbestos board was cut away little by little.

Before long, the general shape of the cylinder head gasket was revealed.

The next step is drilling, which is the most crucial step.

Based on the marked locations, Jiang Hui selected iron nails of suitable thickness and aligned them with the marked points on the waterway, oilway, and cylinder.

Hold the nail down with one hand and pick up a small hammer with the other, then gently tap the top of the nail.

The soft "bang" echoed through the small shop, not loud, but incredibly precise.

With each tap, the nail pierces the asbestos board, leaving a neat little hole.

He would stop every now and then to touch the edge of the hole with his finger to make sure there were no burrs.

Then compare the parameters in the system to ensure that the hole positions are accurate.

After finishing, Jiang Hui took out a piece of copper sheet and cut it into a slightly smaller piece according to the size of the asbestos board. He then carefully laid it on one side of the asbestos board.

The copper sheet wrapped around the asbestos board not only increases its hardness but also provides a better seal, making it much more durable than pure asbestos board.

Then, he picked up the cylinder head gasket adhesive and applied it evenly to the joint between the copper sheet and the asbestos board.

Next, gently press with your hand to ensure that the two fit together tightly without any gaps.

Then set the finished cylinder head gasket aside and let the glue dry naturally.

After finishing the job, Jiang Hui took the cylinder head gasket back to the shop.

Lin Yuanwu leaned closer, carefully examining the cylinder head gasket, and couldn't help but give a thumbs up: "Jiang Hui, your craftsmanship is absolutely amazing!"

"The workmanship is much better than that of ordinary aftermarket parts."

"When Yang Qingshan comes, he definitely won't be able to tell that this is handmade."

"It needs to dry for about ten minutes until the glue is completely dry. Then check it again. If there are no problems, it can be used."

Jiang Hui had gotten used to the occasional flattery from the people in the shop.

However, what he said was true; he was very confident in the cylinder head gasket he made.

Now we're just waiting for Yang Qingshan, this fat sheep, to come to our door.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like