Reborn in 1982: I Became the Richest Man by Repairing Cars
Chapter 170 Conditions Met, Major Foreign Exchange Earner
Chapter 170 Conditions Met, Major Foreign Exchange Earner
"$2000?"
Bu Fande wasn't surprised at all; instead, he fell into deep thought.
As one of the first purchasing managers to come into contact with hot stamping production lines, he had a general idea of the cost of investing in a hot stamping production line in Europe.
According to his understanding, the Saab automobile, the world's first to use hot-stamped parts, had an investment of over $2000 million in its hot-stamping production line.
Although prices have decreased in recent years, a new investment line in Europe still requires approximately $2000 million.
Even if it can be reduced further, the reduction in a short period of time will be relatively limited.
However, if importing a hot stamping production line from China costs $2000 million, that price is clearly not cheap at all.
After all, labor costs are very low in China.
The production lines in Europe are more expensive, which is closely related to the higher labor costs.
However, the production line at the Wudaoying Equipment Factory is clearly more advanced than those currently used in Europe.
Based on the information confirmed so far, the hot-stamped parts made from aluminum-silicon coated steel sheets are very satisfactory in terms of both precision and strength stability.
This makes hot stamping technology fully capable of being used on a large scale in vehicle bodies.
Otherwise, after internal evaluation, Volkswagen would not have used hot stamping technology as the most important breakthrough and selling point for the body technology of its next-generation models.
How long is the warranty period for your equipment?
Instead of directly negotiating the price, Bu Defan wanted to improve the cost-effectiveness of the deal by looking at other aspects.
"We will repair any faults free of charge within one year."
"Furthermore, to ensure the stability of the equipment during the initial production phase, we will arrange for an equipment maintenance team to be stationed directly in your factory area for the first three months."
"If any malfunction occurs, it can be resolved immediately."
Jiang Hui's words brought Bu Defan a small sense of relief.
These are new devices; no manufacturers in Europe produce them.
If any problems arise, it really will require repair by the original manufacturer.
"Your equipment maintenance team needs to help us train an equipment maintenance crew. Three months is not enough; we need to have them stationed at the factory for a year."
"No problem, but you'll need to pay for the on-site support fees!"
Bu Defan's request was not excessive, so Jiang Hui agreed without hesitation.
"This is your first batch of hot stamping forming production lines for export. The price is relatively high, which I understand."
"However, if we continue to make purchases, we hope the price can be at least 10% cheaper."
"And the more we buy, the cheaper the price we hope to get."
Bu Defan made another request.
In a sense, this is also about price.
However, the discussion focused on future prices.
Knowing Volkswagen's future strategy, he knew that there would be more than two hot stamping production lines in the future.
Given the production pace of this technology, even investing in 20 production lines might not be enough if Volkswagen were to adopt it on a large scale.
Of course, Volkswagen will not invest in 100% of its own production lines.
In the future, some parts will definitely be purchased from parts manufacturers.
"No problem. With more equipment in production, the amortization costs for R&D and other aspects can also be reduced."
"I can promise you that your second batch of equipment will be 10% cheaper than it is now."
This wasn't an unreasonable request, and Jiang Hui agreed after a moment's thought.
The price of $2000 million for a single production line was enough to bring about a dramatic transformation for the Wudaoying Equipment Factory.
At that time, we can directly purchase land to build a large factory, laying a solid foundation for future development.
After all, more than 80% of this is profit.
What are the delivery times for your two production lines?
Time waits for no one, and Bu Defan was also worried that things might change if he waited too long.
After all, not only Volkswagen is trying hot stamping technology, but other automakers such as Ford are also making moves at the same time.
"The first production line can start loading ships in two months, and it will arrive in Germany in about three months."
"The installation and debugging of our equipment will take about two months."
"Small-scale trial production can begin after about six months."
"Of course, that's on the premise that your parts molds have already been processed."
"Based on our experience, it takes at least six months to produce a set of molds for hot stamping parts."
"If we start preparing now, we can make it in time."
Jiang Hui had already considered this issue.
It's just that they're holding back a bit now, otherwise the timing could be pushed back a bit.
"What about the second production line?"
"As for the second one, it can be postponed for a maximum of two months."
This time, Jiang Hui did not hesitate at all.
"Okay, I have one more condition: when you have new equipment production capacity in the future, you need to give priority to selling it to Volkswagen."
"Is it okay if we only sell it to other customers if we don't intend to buy it?"
Clearly, Volkswagen's bet on hot stamping technology stems from its desire to avoid being outmaneuvered by other automakers.
In the short term, no other manufacturer's production line technology can surpass that of Wudaoying Equipment Factory.
Therefore, Bu Defan needs to maintain a certain leading advantage.
"no problem!"
Selling to anyone is selling.
In any case, it's all about exporting and earning foreign exchange.
This condition from Volkswagen was not particularly difficult for Jiang Hui to accept.
Soon, both teams began a detailed review of the specific equipment procurement contract.
A week later, the equipment purchase contract was officially signed.
The first 30% advance payment for the equipment contract was quickly deposited into the account of Wudaoying Equipment Factory.
This immediately stunned the bank.
Two lines, $4000 million; even with a 30% prepayment, that's $1200 million.
This number is simply outrageous.
In some ways, this was an unexpected bonus for the bank.
However, because it was so sudden, the bank reported it up the chain of command, which quickly alerted the bank's top management.
The branch manager of the bank in the capital region personally paid a visit.
Upon learning that Wudaoying Equipment Factory had earned a huge amount of foreign exchange by exporting world-leading production line equipment, the other party immediately offered to provide a large amount of low-interest loans.
Banks have always preferred to add to someone's success rather than help someone in need.
Jiang Hui, who wasn't short of money at the moment, directly refused the other party's request.
However, the other party was not angry for a year, and then came to visit every few days, with an extremely good attitude.
The key point is that they never come empty-handed.
"Jiang Hui, why have I never noticed how enthusiastic banks are before?"
"Sometimes when I go to the service center for even the smallest thing, the staff there have a really bad attitude."
Lin Wanqiu, who was in charge of finance, had a deep understanding of these matters.
Despite the fact that Jiang Hui's various factories had gradually grown and expanded over the past few years, they are still a force to be reckoned with.
However, they still don't have much standing in front of government institutions like banks.
Starting this year, the situation seems to have changed dramatically.
Especially after the J71 three-wheeled motorcycle began to be exported to Germany, the enthusiasm of various banks increased significantly.
Now, Wudaoying Equipment Factory has achieved export earnings of 40 million US dollars. Although only 30% has been received, the situation is already very different.
To some extent, the $4000 million in export earnings directly enabled the capital region to complete its export earnings target ahead of schedule this year.
Therefore, not only banks, but also relevant units have increased the number of times they come to inspect.
The leaders were incredibly kind.
"That's normal. We are now a major exporter."
"Jianghui Motorcycle and Wudaoying Equipment Factory combined have earned nearly $5000 million in foreign exchange this year through exports."
"Even if some foreign exchange won't arrive until next year, it's still real export earnings."
"The key is that our development momentum is very good, and next year's export earnings may be even higher than this year's."
"Even large state-owned enterprises can't match such results."
Jiang Hui had a fairly clear understanding of this situation.
This is a fairly normal situation.
"It's definitely more comfortable to make money from foreigners."
Lin Wanqiu said with great emotion.
"The district has proactively found us a factory site covering an area of over 200 acres."
"I plan to give it all to the Wudaoying Equipment Factory and build it into the headquarters of the Wudaoying Equipment Factory."
Nowadays, all factory buildings are directly leased.
Although the neighborhood committee hasn't caused any major trouble yet, it's not their own land, so they're still a little uneasy.
Jiang Hui still hopes to buy land himself to build the factory.
Especially nowadays, industrial land is so cheap that it's practically free.
In particular, the land belonging to the Wudaoying Equipment Factory was practically given away for free by the district, as the factory was a major exporter.
"Yes, judging from the current state of hot stamping equipment, we can definitely export several more production lines next year."
"Building a large factory is no problem at all."
Lin Wanqiu was very clear about the factory's financial situation.
Even disregarding the money earned before, the profits from these two production lines alone would be enough to build a very advanced, large-scale equipment factory.
At that time, whether it is a heating furnace production workshop, a press workshop, or a laser cutting machine production workshop, they can all be set up independently.
To some extent, this is not actually one factory, but several.
In the future, these will lead to the development of various other products.
For example, a heating furnace is certainly not just a type of furnace used in hot stamping production lines.
The same applies to laser cutting equipment; its applications are very broad and it's not limited to hot stamping production lines.
Jiang Hui has made such a big commotion that even if he tried to keep a low profile initially, he couldn't stay low-key any longer.
Especially this year, being a rather special year in the process of reform, some influential newspapers, after receiving the news, specifically reported it as an important achievement of the reform.
As a result, the Wudaoying Equipment Factory became famous overnight.
"Director Jiang, you guys are really impressive. The total export earnings of our Beiyi Machine Tool Factory over the years haven't even reached 4000 million US dollars."
"And yet you guys quietly pulled off such a big deal."
Lin Guotao, as the purchasing manager of Beiyi Machine Tool Factory, was an old acquaintance of Jiang Hui.
The gears from the Wudaoying Gear Factory are now being supplied to the Beiyi Machine Tool Factory on a stable basis.
However, while Wudaoying Gear Factory continued to grow, Beiyi Machine Tool Factory seemed to be stagnating.
The pace of development in the past two years has not been particularly fast.
It even felt a bit like walking with difficulty.
This left Lin Guotao deeply moved.
"We just happened to seize a trend and achieved a breakthrough in hot stamping technology, which is why we got this export order that earns foreign exchange."
"Actually, I think that Beiyi Machine Tool Factory has a very deep foundation and unlimited potential for future development."
"Especially now, many new private enterprises have been established in the south this year, and these enterprises also need various machine tools to produce products."
"If your factory could proactively arrange for sales staff to connect with these private enterprises and provide some cost-effective machine tools, there should be a good market for them."
Some of the equipment in their own factory was purchased from Beiyi Machine Tool Factory.
Although there is a gap in technology compared to imported equipment, not all processes require the use of state-of-the-art machine tools.
Therefore, Jiang Hui also hopes that Beiyi Machine Tool Factory can continue to grow and expand.
This isn't necessarily a bad thing for me.
So he's willing to give him some pointers.
Of course, if Beiyi Machine Tool Factory still fails to develop, then don't blame them for poaching its employees.
In the past, many policies were not so clear, so he didn't dare to be so bold as to poach people from state-owned enterprises.
People are unwilling to easily give up their secure jobs.
But the situation is slowly changing.
Some companies have already started encouraging employees to take unpaid leave, which makes it much easier for Jiang Hui to poach talent.
Due to past circumstances, most technical talents still work in state-owned enterprises.
Jiang Hui had been itching to make a move for a while.
"What you said makes a lot of sense, but putting it into practice will be a bit difficult."
"Our factory is now too big to be managed. We have so many employees, but not many of them are serious about their work."
"In the past, we just waited for customers to come to us. Now we have to take the initiative to develop the market ourselves. It's not that easy."
Although he wasn't in charge of sales, Lin Guotao must have had some understanding of it.
Therefore, he is not very optimistic about this area.
"Minister Lin, there must be quite a few people in your factory who took early retirement so that their children could get a job there, right?"
"Could you introduce me to a few people?"
"Don't worry, I will provide a service fee of 100 yuan for each person I recruit."
"I want as many as you can, as long as you are a level 3 or above worker or technician from Beiyi Machine Tool Factory."
Upon hearing Jiang Hui's words, Lin Guotao was immediately intrigued.
There are just too many people like that at Beiyi Machine Tool Factory.
The referral fee is 100 yuan per person; if you refer 100 people...
Wouldn't that make you a millionaire overnight?
Although the value of being a "ten-thousand-yuan household" is not as high now, there are not many people in the entire Beiyi Machine Tool Factory with a net worth of over ten thousand yuan.
"I'll keep an eye on this matter, but I'll probably have to handle it discreetly."
After a moment's hesitation, Lin Guotao agreed.
Even if Jiang Hui didn't do it himself, he could find someone else to do it.
Then the referral fee will be no longer my responsibility.
The key point is that after thinking about it, he felt that what he did did not harm the factory's interests.
After all, the people being introduced are all retired.
Of course, we're introducing retired people now, but we might introduce working people in the future.
He selectively ignored this point.
You'll Also Like
-
I'm just an ordinary person passing by.
Chapter 347 3 hours ago -
I, a ship girl, am the savior of civilization.
Chapter 110 3 hours ago -
I am the leader of the anti-racism movement.
Chapter 312 3 hours ago -
My girlfriend isn't as cute as me.
Chapter 588 3 hours ago -
The Daily Life of a Hogwarts Terrorist
Chapter 171 3 hours ago -
Brass Dragons in the Dragon World
Chapter 330 3 hours ago -
Who made him Ultraman!.
Chapter 164 3 hours ago -
Sharing the Heavens Starting from Douluo Continent
Chapter 457 3 hours ago -
Douluo Continent: Transmigrating into Huo Yuhao's world, I start by becoming Yao Lao's app
Chapter 559 3 hours ago -
Douluo Continent: The God of Thunder Descends, Martial Soul Lei Yi
Chapter 91 3 hours ago