Reborn in 1982: I Became the Richest Man by Repairing Cars

Chapter 23 Jiang's father was convinced and felt inferior.

Although Jiang Hui asked for a high price of two hundred yuan, the money wasn't Zhao Shijie's.

So when he came back after withdrawing the money, the expression on his face had completely lost its anger.

"Masters, now it's up to you to show your skills."

"When the car is being repaired, our driver, Master Fan Chengtian, will be there to watch over it."

When Zhao Shijie returned, he was followed by a middle-aged man.

Being a driver is a glamorous profession these days.

"I wouldn't trade the steering wheel for a county magistrate position."

"Hold the steering wheel, and don't worry about eating or drinking."

These apt descriptions fully illustrate the appeal of being a driver.

At this moment, it's not just company truck and bus drivers, but also drivers who run transportation businesses.

When driving, not only can the company reimburse meal expenses, but when traveling to other places, the host is often treated to meals.

"Okay, no problem."

Jiang Hui knew that the other party definitely wanted to learn how to fix cars, but if one could fix a car after watching it only once, then Fan Chengtian would be a genius among geniuses.

There aren't that many geniuses in this world.

Could it be that his car repair talent is even more extraordinary than Lin Yuanwu's?

Jiang Dadong came to find Jiang Hui around noon, and by the time he arrived at Coca-Cola, it was already past 2 p.m.

Fortunately, the October sun wasn't too harsh.

He rolled up his sleeves, revealing the fairly firm muscles on his arms.

Then he squatted down in front of the hood of the car, ready to dismantle the advanced diesel engine in front of him.

"Dad, hand me that extra-long sleeve, the size 24."

Jiang Hui didn't even look up, his voice crisp and clear.

Jiang Dadong quickly rummaged through his toolbox, pulled out a socket wrench, and handed it over, his eyes filled with tension and curiosity.

He'd spent half his life repairing cars, fixing at least eighty or a hundred trucks, but this was the first time he'd ever been so close to an Isuzu engine made in Japan.

The dense network of pipes and the orderly layout of parts make it look much more refined than domestically produced engines.

Fan Chengtian, who was standing nearby, also came over.

This top driver at the Coca-Cola factory treats his Isuzu truck like the apple of his eye.

With his hands behind his back, his brows furrowed, and his eyes fixed intently on Jiang Hui's movements, he was afraid of missing any detail.

Jiang Hui took the socket wrench and first reached out and felt around on the engine block a few times.

With the system's information, he could disassemble this Isuzu diesel engine with his eyes closed.

"The first step is to drain the coolant, otherwise you'll get splashed with coolant when we remove the cylinder head later."

As Jiang Hui spoke, he crouched down and crawled under the front of the car, found the drain valve on the side of the engine block, and turned on the switch.

The murky coolant gushed into the pre-placed bucket, carrying a rusty smell.

After the coolant had drained completely, he straightened up, picked up the socket wrench assembly, and said, "Now we're removing the intake and exhaust manifolds. These two things are pressing down on the cylinder head bolts; we can't move forward without removing them."

Jiang Hui put the sleeve onto the intake manifold fixing bolt, and with a sudden jerk of his wrist, the bolt loosened a little with a "click".

Seeing this, Jiang Dadong quickly stepped forward to help hold the manifold: "Take it easy, this cast iron thing is brittle, don't twist it and crack it."

"Don't worry, we have it covered."

Jiang Hui grinned, but his grip remained firm. "The bolt torques on these imported manifolds are all calibrated. When disassembling, you have to loosen them diagonally, and when installing, you have to tighten them diagonally, otherwise they'll easily deform and leak air."

Since Jiang Dadong was with him today, Jiang Hui was prepared to show off his skills and completely convince him of his abilities.

Although he was talking, Jiang Hui's hands were constantly moving.

The intake and exhaust manifolds were quickly removed one by one and placed on a clean tarpaulin laid out next to them.

After removing the manifold, the engine cylinder head was finally exposed.

Jiang Hui picked up the torque wrench, adjusted the torque, and began to loosen the cylinder head bolts in a diagonal sequence.

This is a crucial step in disassembling a diesel engine. If the order is messed up, the cylinder head can easily warp and deform, and it will definitely leak oil and air when it is put back together.

"Dad, give me a hand, the cylinder head is really heavy."

After all the cylinder head bolts were unscrewed, Jiang Hui shouted.

The father and son, each holding one side, carefully supported the cast iron cylinder head and slowly lifted it upwards.

Fan Chengtian quickly came over to help, and the three of them put all their strength into placing the heavy cylinder cover steadily on the oilcloth.

Once the cylinder head is removed, the piston, connecting rod, and valve mechanism inside the cylinder block are fully exposed.

"Master Fan, look at the gap between the valves, it's almost as wide as a fingernail."

Jiang Hui picked up a feeler gauge, inserted it between the valve tappet and the camshaft, measured it, and shook his head, saying, "The factory-calibrated intake valve clearance is 0.25 mm, and the exhaust valve clearance is 0.35 mm."

"It's at least doubled now, and the timing is definitely off. No wonder this car shakes at idle."

Jiang Hui made up a few reasons on the spot.

The real reason is so simple, we can't let Fan Chengtian know it directly.

In any case, as long as the problem is eventually solved, the issues he raised will be considered to be genuine problems.

However, it was resolved later.

Fan Chengtian suddenly realized, slapping his thigh: "So that's what happened! The mechanics who came before only knew how to remove the air filter and fuel injectors; they didn't dare touch the cylinder head at all, let alone perform any calibration!"

Jiang Hui smiled but didn't reply. Instead, he started disassembling the fuel injector assembly.

He first used a special wrench to loosen the clamping nuts of the injectors, and then carefully pulled out the four injectors.

每一根都用记号笔做了标记:「1缸、2缸、3缸、4缸、5缸、6缸,可不能搞混了。

Otherwise, if you reinstall it, the fuel injection sequence will be messed up, and the engine won't even start.

After removing the fuel injectors, he set his sights on the timing gear chamber cover at the front of the engine.

This job is the most strenuous. Not only do you have to dismantle the outer generator and water pump pulleys, but you also have to use a crowbar to slowly pry along the gaps.

Jiang Dadong handed him tools and wiped away the oil stains. Watching his son's skillful movements, the unease in his heart gradually dissipated.

This kid really knows his stuff; he's not just bragging.

As the sun began to set, Fan Chengtian took Jiang Hui and Jiang Dadong to the cafeteria for lunch.

"Dinner will be relatively simple, but tomorrow's lunch will be much better."

At this moment, a trace of arrogance finally returned to Fan Chengtian's face.

Coca-Cola's treatment was second to none in this era, not to mention the food.

Sure enough, when Jiang Hui discovered that tonight's dinner consisted of a large spoonful of braised pork, along with scrambled eggs with tomatoes and cabbage, his appetite was immediately whetted.

Don't say that eating too much fatty meat is bad for your health.

These days, fatty meat is the best thing.

When buying pork, lean meat is always the type that is disliked.

"If the food at our factory were even half as good as this, we'd be so happy."

Jiang Dadong didn't care about his image and ate with gusto.

Anyway, Fan Chengtian has already said that there will be plenty to eat tonight.

It must have been arranged in advance by Zhao Shijie.

"The situation at BAIC is unlikely to improve in the future."

"Right now, we're just surviving on the BJ212, which has been in production for over ten years."

"If other manufacturers launch new products in the future, the BJ212 may become unsaleable."

Jiang Hui knew that in the next few years, SAIC would be the one living more comfortably, not BAIC.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like