Reborn in 1982: I Became the Richest Man by Repairing Cars

Chapter 57 Taking One Step Forward, Lin Yuanwu Repairs a Car

They made a lot of money with Shell, which seemed like a good start.

The next day, as soon as Jiang Hui arrived at the store, an old, worn-out Jiefang CA10 truck was parked in front of the store.

From the first Jiefang CA10 rolling off the production line in 1956, it was upgraded to CA10B in 1960.

In 1980, it was further upgraded to CA10C.

The CA10s you see on the street now are all older than Jiang Hui himself.

"Sir, my car's fuel consumption has increased significantly recently, and it's also very difficult to start."

"Could you help me figure out what the problem is?"

A middle-aged driver who looked to be in his forties or fifties approached Jiang Hui.

"Let me take a look first."

Jiang Hui quickly went to the CA10, picked up the handlebars, and started the CA10 from the front.

However, starting this truck, which was older than itself, was indeed a bit difficult.

It took several attempts to get it started successfully.

No wonder there are almost no female drivers of these cars.

Starting the engine alone is not something an ordinary woman can handle.

Unlike the trucks behind, they no longer need to use a crank handle.

The moment Jiang Hui touched CA10, various fault information appeared in his mind.

Yoho!

There are more than a dozen different kinds of faults.

However, considering that this car was manufactured more than 20 years ago, it is not surprising that it has a lot of malfunctions.

"The distributor, circuit breaker, spark plugs, carburetor, fuel pump, fuel filter—all these parts have some problems."

"If you want it all repaired, the price won't be low."

"Considering the condition of your car, I suggest you don't replace any parts, but instead adjust the parts that can be repaired."

"It basically ensures a smooth start, and fuel consumption is also somewhat reduced compared to before."

Jiang Hui thought for a moment and realized that the fact that people were still using such outdated trucks meant that this company wasn't particularly wealthy.

Replacing all the faulty parts would cost at least several hundred dollars, or even more.

This price is definitely not appropriate.

The key issue is that he couldn't find all the parts in a short time.

"If we only perform some repairs without replacing parts, can we solve the starting and fuel consumption problems?"

The other party asked a question, sounding somewhat uncertain.

Clearly, they still had some concerns.

"It's definitely impossible to achieve the same condition as a brand new car."

"But there will be absolutely no problem with a smooth start, and there will also be no problem with lower fuel consumption than it is now."

Jiang Hui gave a positive answer.

"So... how long will it take to repair, and how much will it cost?"

The other party asked, somewhat hesitantly.

"The circuit breaker contacts on your vehicle are burnt out, and the gap is incorrect."

"Distributor cam wear, distributor head leakage, carbon brush wear."

"The ignition advance angle is out of control and needs adjustment."

"Spark plug carbon buildup, oil stains, electrode erosion, and excessive gap."

"Excessive wear of the carburetor main jet, excessively high fuel level in the float chamber, clogged air jet, and stuck choke valve that does not close properly."

"Basically, the entire engine needs to be disassembled and the key parts processed before it can be used again."

"It would take the three of us two whole days to finish this."

"I'll give you a discount; without replacing any parts, it'll be forty-eight yuan."

"This price is definitely more than half the price of going to a state-run repair shop."

Jiang Hui calculated the working hours based on eight hours per day, which would be forty-eight hours for three people over two days.

However, the hourly rate is calculated at an average of one yuan per hour, which is lower than the two yuan per hour charged by state-owned auto repair shops.

Of course, Lin Yuanwu and Fan Weiming were also included.

Otherwise, Jiang Hui's hourly wage would be equivalent to three yuan, which is already considered high.

"Okay, forty-eight yuan it is."

"But we need to be sure it can be fixed first."

Clearly, the other party must have inquired elsewhere beforehand and knew that the price of 48 yuan was indeed cheap.

Otherwise, they wouldn't have agreed so readily.

"You can wait inside the store, or you can come and pick up your car tomorrow evening."

Jiang Hui called out to them, then turned back into the shop to get his toolbox ready to work.

"I...I'm free this morning, so I'll just wait here."

"I'll leave when I have something to do later."

The other party was clearly a little uneasy, so they wanted to observe for a while first.

Jiang Hui didn't care about this.

"Brother Yuanwu, go open the engine hood and get ready to remove the engine cylinder head and surrounding accessories."

"Weiming, lay a mat on the floor and arrange all the disassembled parts."

"Could you please hand me some tools?"

Jiang Hui quickly began arranging various tasks.

Jiang Hui has always repaired all the cars himself.

This old, worn-out CA10 truck is the perfect practice vehicle.

Therefore, he planned to hand over the repairs to Lin Yuanwu.

Given the theoretical knowledge the other party has accumulated, there shouldn't be any major problems.

At most, it's just a few minor issues; I can lend a hand from the sidelines.

"no problem!"

Lin Yuanwu became excited when he saw that Jiang Hui actually let him do the work.

He had been itching to volunteer, but since Jiang Hui hadn't said anything, he felt too embarrassed to take the initiative.

Jiang Hui has finally brought it up himself.

As for Fan Weiming, although he also works very hard, his talent is clearly not on par with Lin Yuanwu's.

For now, I can only assist.

After opening the engine compartment, Lin Yuanwu first disconnected the battery.

Then the disassembly work began.

He removed the air filter, carburetor, intake manifold, and exhaust manifold in sequence.

Then disassemble the distributor, fuel pump, cooling system piping, starter motor, generator and other accessories.

In addition, pipes and wiring harnesses should be clearly marked to prevent assembly errors.

Jiang Hui watched from the side, occasionally lending a hand.

It has to be said that talented people are truly remarkable.

Lin Yuanwu's every movement was very precise, and the order in which he disassembled the parts was also perfect.

Jiang Hui hardly needed any extra instructions.

In less than an hour, all the surrounding accessories had been disassembled.

Next comes the removal of the cylinder head.

"Remove the cylinder head bolts in a symmetrical, step-by-step manner, starting from both ends and moving towards the middle."

"To prevent cylinder head deformation. After removing the cylinder head, check the cylinder head gasket for damage or corrosion."

Jiang Hui gave a brief reminder and then left it to Lin Yuanwu to figure out on his own.

Jiang Hui only helped a little when it came to disassembling the valve mechanism and piston connecting rod assembly.

"The CA10 has a side-mounted valve structure. After removing the valve cover, take out the valve, valve spring, and valve lifter, and check the valve wear and sealing condition."

"Then remove the oil pan and oil pump, take off the connecting rod cap, place the piston and connecting rod assemblies in sequence, mark the cylinder positions, and ensure that they are assembled in their original positions."

Inside an engine, the more precise the small parts, the easier they are to assemble incorrectly.

If something goes wrong, the engine could be completely destroyed.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like