Reborn in 1982: I Became the Richest Man by Repairing Cars

Chapter 78 Andrei is satisfied; 1000 foreign exchange certificates are in hand.

After finishing his lunch with satisfaction, Lin Yuanwu quietly whispered something to Fan Weimin.

"This is the first time in my life I've ever had such a delicious lunch."

"It felt just as good as the food at the US Embassy last time."

Fan Weimin nodded slightly, his eyes filled with emotion.

As for Jiang Hui, he was naturally much calmer.

He picked up a napkin and wiped his mouth. "Andrei, let's go back and fix the car."

"The parts inside the gearbox are very precise, so it takes a lot of time to process."

Andrei had originally intended for Jiang Hui and the others to rest for a while, but after hearing Jiang Hui's words, he immediately changed his mind and said, "Okay, let's go back then."

After eating and drinking to our hearts' content, we still need to get back to work.

Jiang Hui returned to the GAZ-13 and said to the gearbox on the ground, "Next, we need to repair the most easily overlooked but also the most critical part, which is the gearbox valve body assembly."

"This valve body is covered with tiny oil channels, like human blood vessels."

"The valve core moves back and forth in the oil passage to control the oil pressure and switch gears."

Jiang Hui gently turned the valve core with a screwdriver and felt some stiffness and sticking, as well as difficulty in returning to its original position.

"See that? The valve core is stuck."

"Dirty oil, impurities, and sludge clog the oil passages, causing the oil pressure to fluctuate."

"This will result in slow starts in D mode and a jarring 'click' sound when shifting gears."

Jiang Hui was essentially teaching Lin Yuanwu and Fan Weimin step by step.

Such a pace of progress would naturally be much faster.

Faced with the valve body in front of him, Jiang Hui did not pry it open.

Instead, the valve body is repeatedly cleaned with kerosene to restore it to its original state as much as possible.

Then use a fine copper brush to gently brush away the grease and grime on the valve cores until each valve core can move smoothly and rebound crisply.

This single step took almost an hour.

"The repair of transmissions, especially automatic transmissions, cannot be rushed at all."

"It's full of precision parts; if it's even slightly off, the gear shifting won't be smooth."

"They're like some high-precision machine tools; they don't look much different from other machine tools."

"However, in order to fully release the stress of cast iron, these machine tool manufacturers will put the cast iron in the warehouse for natural aging several years in advance."

Jiang Hui's explanation resonated with Andrei, who remarked, "Jiang, I didn't expect you to know so much about the machine tool industry."

"I have an uncle who works at the Kolomen Heavy Machine Tool Plant. Many of their machine bed materials need to be prepared several years in advance."

"The raw materials for some large lathes are prepared as early as ten years in advance."

When Andrei said this, his trust in Jiang Hui increased even more.

The other person looks young, but they know a lot.

In interpersonal interactions, creating resonance is key to rapidly improving relationships.

Clearly, Jiang Hui's love for cars and his knowledge of machine tools resonated with Andrei's.

"Your uncle is very capable. I heard that the high-end machine tools produced by the Kolomen Heavy Machine Tool Plant are core equipment for manufacturing nuclear submarine hulls, large steam turbine rotors, and reactor pressure vessels."

Jiang Hui later knew some information about this machine tool factory.

I never expected to be able to use it in a chat today.

"You knew that too?"

Andrei looked at Jiang Hui with great surprise.

"If you understand one method, you can understand all methods. For example, some parts on a car transmission need to be processed using high-precision machine tools."

"Large-scale ultra-high precision machine tools are definitely key to the military industry."

"This is the same in every country."

Jiang Hui's explanation put Andrei at ease.

He almost began to doubt Jiang Hui's identity.

After all, how would an ordinary person know about the Kolomen Heavy Machine Tool Factory?

He also casually mentioned information that ordinary people don't have access to, such as the hull of a nuclear submarine, the rotor of a large steam turbine, and the pressure vessel of a reactor.

After cleaning the valve body and soaking the clutch discs for a sufficient amount of time, Jiang Hui began to reassemble the parts.

Friction plates, steel plates, pressure plates, and return springs are stacked one by one in sequence, with the gaps adjusted to the standard range.

Planetary gears, bearings, and brake bands were put back in place one by one, and every bolt was tightened to the required torque.

Jiang Hui would explain some precautions to Lin Yuanwu and Fan Weimin when installing each part.

This is something you absolutely can't learn from books.

Once the sealing surfaces of the casing are cleaned and the housing is closed, today's maintenance work enters its final stage.

That means changing the transmission fluid in this gearbox.

Many people know that engines need regular maintenance and oil changes.

However, many people don't know that the transmission fluid also needs to be changed regularly.

However, the transmissions in later generations were of higher quality, and generally only needed to be replaced after 50,000 kilometers.

Unlike engines, where the 4S store calls you to come back for maintenance after 5,000 kilometers or six months.

After changing the transmission fluid, Jiang Hui asked Fan Weimin and Lin Yuanwu to help him reinstall the transmission in the engine compartment.

"After filling up the tank, start the engine, but don't rush off."

"Put it in neutral and let it idle for a few minutes to allow the oil to fill the entire oil passage."

Once everything was settled, Jiang Hui sat in the driver's seat and explained the situation to Andrei and the others outside the window.

Jiang Hui switched between P, R, N, and D gears in sequence, pausing for a few seconds at each gear to allow oil pressure to build up.

The original "click" sound disappeared, and the gear shifting became smooth and quiet.

He stepped on the brake and gently accelerated.

The V8 engine is deep and powerful, and the transmission no longer slips.

"Judging from the sound, the oil pressure is normal and the clutch is engaged stably."

Upon hearing this, Andrei immediately asked impatiently, "Jiang, can we test drive it now?"

Although Jiang Hui said it was all sorted out, Andrei was still worried because there was no test drive.

"Can."

Jiang Hui gave the driver's seat to Andrei and sat in the passenger seat himself.

Soon, Andrei slowly started driving the car.

This time, there was no sense of powerlessness, no stagnation.

The large-displacement V8 engine immediately gives it confidence, providing a smooth and powerful start.

When accelerating to 30km/h and shifting gears, the car only moves slightly smoothly, without any of the sudden jolts or shocks it had before.

When accelerating to 50km/h, the gear shifts are as smooth as flowing water.

As they drove uphill, Andrei lightly pressed the accelerator.

The engine speed rose steadily, and the vehicle speed kept up accordingly. There was no more slippage, idling, or roaring without moving.

Andrei's expression shifted from tension to surprise, and finally he breathed a sigh of relief.

"Jiang, perfect! Exactly like a brand new car!"

Andrei turned off the engine, engaged the handbrake, and got out of the car.

He came over and gave Jiang Hui a bear hug.

"If you have any similar problems within three months, come to my shop anytime."

"We will provide free repairs."

Jiang Hui quickly broke free from Andrei's embrace.

Andrei is not Lin Wanqiu.

He has no interest in hugging men.

"Wait for me a moment, I'll go get the foreign exchange certificates."

After Andrei finished speaking, he quickly left.

He returned shortly afterward with a small stack of foreign exchange certificates.

"This is a 1000 yuan foreign exchange certificate. Please confirm!"

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like