Reborn in 1982: I Became the Richest Man by Repairing Cars

Chapter 8 Engine Disassembly: Hidden Secrets

"Alright, you said it yourself!" Zhou Ming said in a deep voice, then turned to Chen Qingxiang, "Master Chen, you'll have to be a witness!"

He looked at the certainty in Jiang Hui's eyes, and then thought of the experienced repairmen who had been struggling for a week and were still at a loss.

They are already considering whether to contact experts from FAW for a consultation.

Although experts can certainly handle it, the process is complicated, and the cost of travel expenses and lost wages adds up to far more than twenty yuan, not to mention owing favors.

"Don't worry, Mr. Zhou! If Master Jiang can't fix it and dares to renege on the payment, I'll cover the ten yuan!"

Chen Qingxiang patted his chest and gave his guarantee, showing a rare display of confidence.

Anyway, he lived in a large courtyard with Jiang Hui. The Jiang family had two strong laborers, Jiang Dadong and Jiang Yong, who earned wages, so their family was not poor.

Even if I pay the money upfront, I'm not worried about not getting it back.

Once the rules were agreed upon, Jiang Hui immediately got to work.

At first, Zhou Ming stood by and watched, but he watched as Jiang Hui disassembled the engine with quick and efficient movements.

His skills in tightening bolts and removing parts with a wrench were no less than those of the experienced mechanics in the factory's maintenance team. Unable to bear the sun any longer, he turned around and went back to his office.

Chen Qingxiang was also concerned about his own work, so he said goodbye and left in a hurry.

Jiang Hui, on the contrary, remained calm and composed, believing that slow and steady wins the race.

Although the system had already identified the root cause of the fault, for old trucks of this era, relying solely on the information in the system is ultimately not as effective as hands-on experience.

When disassembling the engine of the Jiefang CA10C, one must adhere to the old rules of "external before internal, auxiliary before main, and cold before hot."

The whole process relies on household tools like wrenches, sockets, screwdrivers, and pullers; there's no high-tech equipment involved.

It all comes down to precision and a good grasp of the fit between the parts; you can't use any brute force at all—these old castings are precious, and they can easily cause serious problems if they're bumped or knocked.

He started with the front-end accessories, first loosening the fixing bolts of the fan cover and removing the shiny metal fan cover.

Next, loosen the connecting nut between the fan clutch and the water pump shaft, remove the fan assembly and V-belt, and the outlines of the water pump, generator, and distributor will immediately be revealed.

Then, the generator bracket bolts were removed, the power cord wrapped in black tape was disconnected, and the generator was carefully removed.

Then, I unscrewed the bolts on the distributor base, drew a mark with chalk, and accurately recorded the corresponding position of the distributor and the cylinder.

Only then did he gently pull out the distributor, afraid of damaging the gears inside—he couldn't fix the old problem only to create a new one.

Next, he removed the carburetor's intake and exhaust pipes, loosened the bolts connecting the carburetor to the intake manifold, and removed the heavy carburetor assembly.

After removing the intake manifold and exhaust manifold in sequence, the aluminum alloy valve cover was finally revealed.

Next came the most challenging part: disassembling the cylinder head assembly. Jiang Hui unscrewed the valve cover bolts, removed the cover, and the neatly arranged valve springs, rocker arms, and push rods came into view.

He first marked the rocker arm shaft bracket, then loosened the fixing nut, removed the rocker arm shaft assembly and rocker arm, and arranged the push rods one by one in the cylinder sequence, without any disorder.

Finally, he used a socket wrench to loosen the cylinder head bolts symmetrically in a crisscross pattern, then bent down and slowly lifted the cast iron cylinder head—it was very heavy, and he had to grit his teeth to lift it steadily.

He couldn't help but think to himself: next time I repair this big thing, I'll definitely need to find a helper.

It saves effort and avoids damage to parts.

There's no suitable candidate right now, so I have to shoulder the burden myself.

After removing the cylinder head, the combustion chamber, valves, and valve seats are clearly visible.

Actually, with the system prompts, he didn't need to disassemble it so thoroughly; he could have just gone straight to the carburetor to clean the carbon deposits.

Such a good opportunity for hands-on practice is rare. It allows you to become familiar with the structure of old trucks and show that you are doing a fine job. Why not take it?

As long as it's fixed before the end of the workday, that's fine. Fixing it too quickly might make people feel like the twenty yuan was a waste.

In just one morning, Jiang Hui did only one thing—he disassembled the engine of the CA10C into eight pieces.

Cylinder head, piston, rocker arm, carburetor...

All the parts were neatly arranged in the order of disassembly, even the bolts were stacked separately. Although the floor was covered with a layer of old newspapers, it did not look messy at all.

Zhou Ming came over to inspect the scene midway through, and seeing the orderly arrangement, his previously furrowed brows relaxed a bit.

The look in her eyes as she looked at Jiang Hui now held a genuine expectation.

At noon, Shougang was quite generous and provided lunch.

In the afternoon, Jiang Hui finally focused on the core component: the carburetor.

He took a thin wire and rummaged through his toolbox for an old rag soaked in kerosene—an old method for cleaning precision parts, more thorough than water.

The idle speed metering orifice is as fine as a needle tip, and the internal blockage is not visible to the naked eye.

Based on the location marked by the system, he gently inserted the thin wire.

The channels of carbon buildup were cleared little by little, the movements as gentle as handling fragile porcelain, for fear of damaging the inner wall of the measuring hole.

After unclogging the carburetor, he repeatedly soaked and wiped it in the kerosene he had obtained from Zhou Ming.

Then use an air pump to blow air in the opposite direction into the oil passage, and the tiny carbon particles fall down with the airflow.

After the carburetor casing dried and revealed a shiny metallic luster, he checked the idle fuel passage and nozzles one by one to make sure there were no residual impurities before starting the reassembly.

Reassembly requires a more precise order than disassembly. Following the markings he had drawn earlier, he first put the rocker arm shaft assembly back in place, and then inserted the push rods back in the cylinder sequence.

Apply even force when tightening bolts, ensuring the bolts are tightened precisely.

If it's too tight, the threads will strip; if it's too loose, steam will leak out.

Next, he carefully lifted the cast iron cylinder head back, tightened the bolts symmetrically and crosswise with a socket, and then installed the exhaust manifold and intake manifold in sequence.

Reset the cleaned carburetor and reconnect the power cord wrapped in black electrical tape.

Finally, the generator, V-belt, and sheet metal fan cover were installed, and every bolt was tightened. The parts on the ground gradually returned to their places, and the engine was restored to its complete state.

The whole process was smooth and effortless. Sunlight streamed through the gaps in the factory building, illuminating his oil-stained hands and making his movements appear even more skillful.

With a "click," Jiang Hui turned the key.

The starter motor roared, unlike the previous dull sound. The engine suddenly "whooshed" and ran smoothly and powerfully, with a uniform idle speed. There was no longer the problem of fluctuating speed and stalling as soon as the accelerator was released.

He stepped on the gas, and after a plume of black smoke billowed from the exhaust pipe, the exhaust gradually became clearer, and the engine sound grew deeper and more resonant.

Just then, Zhou Ming and Chen Qingxiang arrived together and stopped in their tracks upon seeing the scene.

Zhou Ming strode forward, personally turned the key to test drive the car, and repeatedly pressed and released the accelerator. The doubts on his face completely disappeared, replaced by a face full of approval.

"It's really fixed! It's much better than what the repair team did in a week!"

He patted the engine hood, his tone full of surprise, and the look in his eyes when he looked at Jiang Hui had completely changed, no longer showing the initial contempt.

Jiang Hui wiped the grease off his hands and said with a smile, "Zhou Ke, the problem is cured. From now on, just clean the carburetor regularly to avoid this problem from happening again."

Chen Qingxiang leaned over, beaming, and patted him on the shoulder: "Good lad, you're really something! It wasn't for nothing that I vouched for you!"

Zhou Ming immediately pulled out two "big unity" bills from his pocket and handed them over, his tone sincere: "Master Jiang, your skills are top-notch! Take this twenty yuan, if the factory has any problems with the cars and can't fix them, we'll come to you again!"

"And these industrial vouchers are an extra reward for our factory."

Jiang Hui didn't stand on ceremony, took the money and industrial vouchers and put them in his pocket, feeling very at ease.

This is not just twenty yuan in wages, but also the key to getting into Shougang Group.

He greeted Zhou Ming and Chen Qingxiang, picked up his toolbox, and walked briskly out of the factory area.

I had to pay Chen Qingxiang a two-yuan referral fee before I got back.

The days ahead are becoming more and more promising.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like