I manufacture weapons in the Middle East and am wanted globally?
Chapter 145: Please use honorifics at this time!
Chen Yong called home again a week later.
He squatted in the shade of the crooked olive tree on the outskirts of the camp; the blazing sun was really irritating.
"Ah Yong! Let me tell you, over two hundred people have already signed up! If I weren't so strict, it would easily have reached 500!"
Chen Yong's fingers trembled as he held his phone: "How much? Over two hundred?"
"Holy crap? Dad, you included the old yellow dog in the family?"
"What nonsense are you talking about!"
"Does your dog screw in screws or shovel dust?"
The old man's tone was smug: "You have no idea, Wang Laosi, the guy who runs the small shop next door, brought two cartons of cigarettes to my house just to get his nephew into the family."
Chen Yong's lips twitched: "Dad, that's Ah Zheng opening a factory in Africa, not carrying bricks on a construction site. I've seen Wang Laosi's nephew before; he has one leg shorter than the other. I saw him when he was a kid... You wouldn't agree to this, would you?"
"I'm a village official, how could I make such a mistake?"
"Two lions are trying to test the cadres?"
"Ahem, you and Ah Zheng are dealing with the Chen family's business; do you think just anyone can come in?"
"Don't worry, these two hundred-plus are all reliable young people from our hometown..."
Chen Yong was silent for two seconds: "Dad, then you organize the list. I need to tell A-Zheng."
"Okay, okay, I've tidied it up for you."
"Dad, you've worked hard."
"What's so hard about it? You guys are the ones who are having a hard time out there."
The old man's voice suddenly lowered, as if it were being squeezed out of his throat, "Ah Yong, be careful out there. I'm old, and I don't care about you anymore."
"But when I was young, your father also killed people. Just remember this: when you're alive, you have everything; when you're dead, you really have nothing left."
"..."
Chen Yong took a deep breath. "Dad, don't worry. Zheng has a lot of prestige here now. Nobody's blind to his abilities."
"That's fine, that's all."
After hanging up the phone, Chen Yong stood up, dusted himself off, and searched the camp for a while but couldn't find Chen Zheng. He then saw Assam and hurriedly asked, "Where's the boss?"
When you're out in public, you should use a formal title or address.
"He went to the factory. Do you need to see him?"
Chen Yong nodded: "I got word from home that more than two hundred people are coming. I need to let him know."
"More than 200 people?"
Assam scratched his head. "Wow, all your family members back home like to travel around!"
"Hometown of overseas Chinese, hometown of overseas Chinese~" Chen Yong said with an awkward smile.
As for how to get out, don't worry about that!
It's a hometown of overseas Chinese anyway!
……
Meanwhile, Chen was in the underground military factory, witnessing the rollout of a new product!
The Soviet Union's 2A42 30mm autocannon!
NATO doesn't have a code name for this thing.
However, within the Russian military, it is jokingly referred to as an infantry harvester or a building demolition machine.
Military enthusiasts call it: 30 Shipunov!
It can reliably destroy various armored vehicles, armored personnel carriers, pickup trucks, and fortifications within 1500 meters.
At close range (within 500 meters), striking the sides, rear, and observation/aiming equipment of main battle tanks is extremely effective. It is not necessary to penetrate the main armor; sweeping the optical equipment, fuel tanks, tracks, and external components can render the tank incapable of combat.
Extremely fierce!
There are even more platforms it can be used on. If you have a big butt... you can even hang some accessories on it (but don't try it!).
If you have an unused Rolls-Royce, Audi, Mercedes, etc. at home, you can try putting it on top; it's very stylish!
Huo Yin walked up to Chen Zheng and said, "Boss, the 2A42 gun has about 120 parts, 42 of which are core components. Today, we'll tackle the three toughest parts: the barrel, the receiver, and the ammunition feeding mechanism."
"Come here, come here~"
Huo Yin nodded, turned around, and shouted to the row of monsters behind him who were already in their positions: "Attention all workstations! Activate according to the order of the crafting cards!"
"First step: material processing. Preheat the vacuum furnace to 1100 degrees Celsius, with a target heating time of 45 minutes. The hot rolling mill is ready for billet preparation, and the ingot dimensions are as required!"
The bald man was already standing in front of the ZG-0.5 vacuum melting and degassing furnace.
The graphite heating element inside the furnace began to change from dark red to bright orange, and the furnace temperature value jumped up and down on the screen.
The furnace door was closed, and the vacuum pump unit emitted a low hum, drawing the air down to below 0.05 Pa.
Immediately afterwards, a pre-cut chromium-molybdenum-vanadium steel ingot was carried by Chiang Kai-shek. The ingot was about two meters long and about 150 millimeters in diameter, and its surface still had the casting skin from when it was taken out of the ingot mold.
Kaishen used a pneumatic clamp to hold one end of the steel ingot and fed it into the first roughing roll of the hot rolling mill.
"Boss, for the 2A42 gun barrel blank, we use chromium-molybdenum-vanadium steel that we smelted ourselves. It has a carbon content of 0.28%, a chromium content of 1.6%, a molybdenum content of 0.5%, and a vanadium content of 0.15%."
Huo Yin stood next to Chen Zheng and explained point by point, "This grade of steel is the standard material for making high-pressure automatic cannon barrels. Its tensile strength can reach more than 1100 MPa and its yield strength is not less than 900 MPa."
He paused, then added, "The data looks even better than the original manufacturer's standard Russian grade because we used a hot isostatic press for densification, reducing the micro-porosity of the material to below 0.1%."
The roughing rolls of the hot rolling mill begin to rotate, and the hot steel ingot is squeezed and deformed between the roll gaps, from a diameter of 150 mm to 120 mm, 100 mm, and finally through the finishing rolling passes, it becomes a round bar with an outer diameter of about 85 mm and a length of about 2.6 meters.
When the steel bars are ejected from the mill exit, their surfaces still retain a dark red residual heat. They slowly roll over the cooling line, and then cooling water is sprayed onto them, hissing as a cloud of white steam rises up.
Awesome~~~
After cooling to room temperature, the bald head used a crane to lift the round bar and send it to the front of the T2108 deep hole drilling machine.
This drilling machine has a buff: drilling speed +120% and accuracy +70%.
With the buff, the T2108's feed system has excellent noise control.
The bald man stood in front of the control panel, his pupils fixed on the reading on the depth gauge, one hand always resting on the feed rate knob, ready to make fine adjustments at any time.
This is also a technical skill.
People who need to fast-forward through videos are really not suited for this job because they lack patience.
About ten minutes later, the drill bit emerged from the other end of the cannon barrel.
"Deep hole passed."
Baldy turned off the machine tool, removed the barrel from the fixture, used an air gun to blow away the remaining cutting fluid from the inner wall, and then used an inside micrometer to measure several sections, reporting the data: "Through hole diameter, 30.02 mm, coaxiality 0.01 mm."
Huo Yin nodded beside him, then raised his chin at Four-Eyes: "Enlarge the hole, ream the hole, rifling, and use your DMU80P five-axis machine for external diameter finishing."
The gun barrel was transferred from the T2108 to the worktable of the DMU80P.
Siyan takes the barrel and uses a hydraulic clamp to fix it on the center line of the spindle, ensuring that the outer diameter machining and deep hole are coaxial.
Four Eyes retrieved a pre-programmed sequence from the control panel and imported the processing program from the computer.
After these tasks are completed, the next steps are to enlarge and ream the holes.
Four-Eyes switched to a 33mm reamer and ran it along the pre-drilled 30mm through hole to enlarge the inner diameter to 33mm. Then, he switched to a 35mm reamer to finely ream it to the standard size—an inner diameter of 35mm, with a tolerance controlled within ±0.015mm.
After these steps are completed, proceed to the next step: rifling.
...
The other DMG MORI DMU60 and Haas VF-2 are for handling the receivers.
The receiver of the 2a42 is the core skeleton of the entire gun. Its shape is complex, with multiple mounting surfaces and threaded holes, as well as interfaces for the feeding mechanism and grooves for the extractor.
The casing is also made of chromium-molybdenum-vanadium steel, which undergoes vacuum melting and hot isostatic pressing, resulting in extremely high density.
Dog Egg is squatting in front of the DMU60. This is a five-axis linkage machining solution that requires a total of 12 different types of milling cutters and drills. The entire program is divided into four steps, and the fixture needs to be changed once and the workpiece orientation needs to be changed once in the middle.
The first step is to rough mill the overall shape of the casing.
A 32mm diameter corn milling cutter quickly cuts into the surface of the blank to roughen the contour.
The second step is to finely process the mounting surface.
Replace with a 12mm diameter carbide end mill and perform finishing on the key mounting surfaces of the housing, requiring a surface roughness of Ra0.8.
The third step is to mill the inner cavity and the groove.
Replace with a 6mm diameter ball end mill to machine the automatic machine guide groove and the shell extraction hook slide inside the casing.
These two slots require extremely high precision.
The width tolerance of the guide rail groove is ±0.01 mm, and the straightness is 0.005 mm. Five-axis linkage is required to ensure the precise coordination between the tool posture and the workpiece posture.
The fourth step is drilling and tapping.
The casing has more than a dozen threaded holes and locating pin holes, distributed on different surfaces.
The entire drilling process is completed in one clamping operation on the dmu60, avoiding positioning errors caused by secondary clamping.
The whole process lasted nearly two hours.
Dog Egg just squatted next to the machine tool without moving.
This is something that ordinary workers cannot withstand.
When the casing was removed from the dmu60, the surface texture was clear and uniform, and all mounting surfaces and threaded holes were machined in place.
Huo Yin took the casing and placed it on the industrial CT workbench.
"Scan it once and see if there are any internal defects," Huo Yin said to Einsky.
Einsky nodded and started the CT scan.
"No internal cracks, no pores, no shrinkage, all are up to standard."
"Isn't this step unnecessary?" Chen Zheng asked from the side.
"This step is for some clients. After all, many clients are like you, boss... uh, they don't really understand the steps." Huo Yin originally wanted to say, "You're such an amateur."
But then he quickly changed the subject.
Monsters lack emotional intelligence and will never improve!
The next step is the ammunition feeding mechanism.
The 2a42's ammunition feeding mechanism adopts a two-way feeding method and consists of a feeding wheel, a feeding arm, a bullet-stopping tooth, and a feeding chute.
The working environment of this set of parts is extremely harsh. At a firing rate of more than 600 rounds per minute, the feed wheel has to complete more than ten feed actions per second, which requires extremely high wear resistance and impact resistance.
The material is carburized bearing steel, which has undergone vacuum melting and hot isostatic pressing.
Niu Yi rough-machined the shape of the feed wheel on an SK40P CNC lathe, and then transferred it to an M1432B universal cylindrical grinder to finish the outer diameter, achieving a surface roughness of Ra0.4.
After fine grinding, the feed wheel is sent to the DMG MORI 80P to mill the toothed feed wheel. The toothed feed wheel has an involute shape and is milled using a custom-made forming milling cutter.
Meanwhile, the bullet-stopping teeth and bullet-removing arms are processed on another line.
Niu San machined the outer diameter of the blank for the spring-loaded arm on a CAK5085 CNC lathe, and then transferred it to an X6132 horizontal universal milling machine to mill the contour and groove of the spring-loaded arm.
Niu Er stamped out blanks for the bullet-resistant teeth on the J23-63 press, and then trimmed the edges by hand.
"Final assembly can begin."
Huo Yin clapped his hands. "Baldy! Bring over the firing mechanism, recoil spring assembly, buffer, and sight mount."
The bald man responded and turned to walk towards the material rack in the assembly area, carrying over boxes of pre-processed small parts.
Baldy and Chiang Kai-shek each stood on one side, while Tianji handed them tools. The receiver was clamped in the vise on the worktable. Baldy first took the gun barrel from the rack, applied a layer of anti-seize agent to the interface, then aligned it with the mounting hole at the front of the receiver, pushed it in, and tightened the lock nut.
The installation gap is controlled within 0.02 mm, and the coaxiality of the gun barrel and the receiver is tested by a laser alignment instrument, with a deviation not exceeding 0.01 mm.
The firing mechanism and recoil spring assembly are installed from the rear of the receiver. The breech end uses a special tool to compress the recoil spring to a specified length and lock it into the limiting groove.
The extractor and ejector are mounted on top of the receiver. The bald head repeatedly flicks the extractor with his fingers to ensure that the rebound force is even.
Finally, there's the electronic control section of the 2a42.
The firing pin action is controlled by a solenoid valve.
Four-Eyes crouched on the side of the chassis, holding a thin-tipped screwdriver. He inserted the miniature control circuit board, which was made from the LCR 600i, into the reserved slot on the side of the chassis, and then routed the wires, connecting the power and signal wires of the solenoid valve to the circuit board.
After all assembly was completed, the entire cannon was lifted and installed on a simple test bench.
Huo Yin stood to the side of the test bench, holding a speed measuring instrument and a pressure sensor in his hand.
The bald man squatted on the side of the breech, loaded the first training round into the chamber, and closed the locking mechanism.
The ammunition belt passes through the feed mechanism inlet and engages with the first tooth of the feed wheel.
"Prepare for test firing."
Huo Yin shouted to those around him, "Everyone, retreat beyond the safety line!"
Chen Zheng stood about 20 meters away from the test bench, staring wide-eyed.
Just looking at it, he thought, "This machine gun is... damn complicated!"
Even at its peak during the Cold War, this thing only had a production capacity of 120 to 180 units per month.
After 2000, orders shrank, and normal monthly production was only 2.30 units.
The frog took a few steps back and hid to the side of a gantry milling machine, its long ears flattened and pressed against its head.
He looked around, then walked over to Boss Chen and handed him some cotton.
The bald man took the remote-controlled igniter from Huo Yin, stepped back to the firing position, and placed his thumb on the red button.
"Three, two, one!!!"
With a short, muffled thud, the bullet shot out from the muzzle, leaving an almost invisible white trail in the air, before striking the sandbag barrier at the end of the test range with a dull thud, the bullet embedding itself deep within the sandbag.
The velocity meter captured the instantaneous velocity of the projectile at the muzzle, and the number on the screen jumped to 985 meters per second.
The pressure sensor recorded a peak chamber pressure of 195 MPa, which is well within the allowable range of 2a42.
The extractor catches the tail of the cartridge case, smoothly pulling the empty cartridge case out of the chamber and throwing it into the receiving tray on the side with a crisp, clean metallic clang.
"Rapid firing test! Continuous fire!" Huo Yin shouted.
The bald man picked up the ammunition belt from the ground and pressed the second and third training rounds into the links.
He crouched down again and pressed the launch button.
Rat-a-tat-tat-tat!!!
The sandbag barriers were so badly damaged they looked like they were about to fall apart!
Huo Yin walked around the test bench, went to the side of the gun barrel, and touched the surface of the gun barrel with the back of his hand. The temperature rose by about 30 degrees, which is within the normal range.
Chen Zheng walked up to the cannon, "Whoosh!"
"Not bad, it looks pretty convincing."
Huo Yin stood next to him and adjusted his glasses:
"Boss, this cannon is a prototype, with a caliber of 30mm and a total weight of about 150 kg, including the tripod. Its effective range is 1500 meters against ground targets and 1000 meters against air targets. The theoretical rate of fire is 600 rounds per minute, and the actual sustained rate of fire is about 300 rounds per minute. It uses Russian 30x165mm ammunition, and the primer firing method is consistent with the original factory standard, making it compatible with most 30mm artillery ammunition types available on the market."
"Moreover, in the manufacturing process of this cannon, we used the chromium-molybdenum-vanadium steel barrel processed by hot isostatic pressing and the micro-polishing technology from the core process of laser gyroscope, which makes the wear life of the inner wall of the barrel at least 30% longer than the original factory standard."
Chen Zheng nodded: "The armed groups in the Middle East that need vehicle-mounted fire support, such as the Houthi rebels in Yemen and the Shiite militias in Iraq, have a huge demand for this kind of equipment. Could we get some for our Gazelle?"
Huo Yin was taken aback for a moment. "Boss, theoretically, it's possible to fake it."
"The SA-341's fuselage structure has some redundancy. The original design reserved weapon hardpoint interfaces, although the French mainly used it to carry HOT anti-tank missiles or 20mm cannon pods."
「单门2a42全重约150公斤,加上一个简单的弹药箱按备弹200发算,弹药箱重约30到40公斤整组重量接近200公斤。「
"If only one door is mounted on a pylon on the left or right side of the fuselage, the center of gravity shift can be adjusted with counterweights. Speed and maneuverability will be affected, but it can still fly."
Chen Zheng nodded and pressed on, "What about the other two doors?"
Huo Yin scratched his afro: "If it's two doors, one on each side, arranged symmetrically, the center of gravity won't be a big problem, but the overall weight will increase by nearly 400 kilograms."
"The empty weight of the Gazelle is about 900 kilograms, and the maximum takeoff weight is about 1800 kilograms. The extra 400 kilograms means that a large portion of the payload margin is taken away, the fuel volume is halved, and the range will be reduced from more than 600 kilometers to less than 300 kilometers."
"Can you withstand the recoil?" Boss Chen asked hurriedly.
He'd wanted to equip the little antelope with heavy firepower for a long time!
Aircraft without cannons...
Wouldn't that make them infantry?
If only in the future...
He even planned to upgrade the transport planes he bought to heavy firepower.
Huo Yin said, "The theoretical rate of fire of the 2A42 is 600 rounds per minute, and the peak recoil can reach several tons. When firing from a single door, the fuselage will shake noticeably. When firing from both doors at the same time, the pilot must be mentally prepared for the fuselage to shake like a sieve."
Chen Zheng, with a cigarette butt dangling from his lips, frowned and pondered for a moment before saying decisively:
"Then let's just install one!"
Huo Yin pushed up his glasses:
"No problem, boss. The rack structure can be directly milled out on a GMC1811 gantry milling machine using 7075-T6 aluminum alloy sheet. Weld a quick-release clip to the bottom, and fix the mounting points to the original weapon rack interfaces on the fuselage with two 12mm diameter high-strength bolts. The ammunition box is also riveted with aluminum alloy, and the inner lining is made of fiberglass board for anti-static purposes. The entire rack and ammunition box will have an empty weight of less than 25 kg."
"How long will that take?"
"From design to first trial assembly, it takes 2 days; if we modify the existing drawings directly, it takes 1 days."
Chen Zheng waved his hand: "Then let's get to work, as soon as possible. After this thing is built, let me test it by flying it around once."
Huo Yin nodded, turned and walked towards the technical area, already calling out to his men: "Four-Eyes! Frog! Get the 30mm cannon pylon design drawings! Scan the fuselage interface parameters first!"
Chen Zheng watched his hurried figure disappear into the distance, took the cigarette from his mouth, and chuckled.
The cannon turned the little antelope into a real "little bully".
Anyone who dares to loiter over Barigale will get a bullet first!
It can even provide armed support to Puntland frontline troops when necessary!
Of course, you have to pay.
I own an arms company, and I also sell armed support...
Not too much, right?
The problem is that we're taking too big a step now and we're afraid of hurting ourselves.
Boss Chen will establish PMC company sooner or later!
They provide weapons here, and war there, hehehe...
Exciting! (Wen Songyin)
Just then, Chen Yong called him.
"Feed~ What?!"
"The signal is bad inside, wait for me to come out!"
Chen Zheng hung up the phone, crawled out of the underground factory's passage, and drove back to the camp. There he saw Chen Yong squatting there smoking.
"Ah Zheng."
When Chen Yong saw him coming, he quickly stood up and said, "My dad sent word that more than 200 people have come to our house, mostly young people."
"Uncle is really efficient! It's only been a few days!"
Chen Yong grinned and said, "My dad is a very decisive and efficient person. He said that when the villagers heard about triple pay, their eyes lit up. Even the steelworkers from the neighboring village who had been working on construction sites in the county for several years came to sign up."
"More than two hundred people, traveling from China to Somalia, how to get there is a problem."
"Let's charter a plane!"
Chen Zheng interrupted him, "Have your uncle compile a list of everyone's names, ID numbers, home addresses, and contact information, and send a copy to Hernandez in Hong Kong. They can then register a labor dispatch company there and process work visas for them under the company's name. This will make the process more formal and avoid future trouble."
Chen Yong nodded: "Okay, I'll have my dad get it done as soon as possible."
"Oh, right, there's one more thing."
Chen Zheng's expression turned serious. "You need to make it clear to your uncle about the salary. The salary can't be paid to them all at once. You need to be careful."
Chen Yong was taken aback: "Ah Zheng, you mean... deduct a portion?"
Chen Zheng put the cigarette back in his mouth and patiently explained, "We're both from the village, you know better than me how many of those people can control themselves."
"You might save up 100,000 or 200,000 yuan in a year, but on the way back, someone will trick you into going to a casino, hiring prostitutes, and taking out high-interest loans, and you'll squander it all in a month."
"When you go on a long trip, you forget what you believe in, and you wish you could just keep birds in other people's nests every day!"
"I've seen this kind of thing a lot. When I was in Syria, I knew a bricklayer who worked on a construction site for three years and saved up 200,000 yuan. Before returning to China, he was lured into a casino in Beirut and lost it all in one night. In the end, even his plane ticket back to China was paid for by overseas Chinese in Syria."
"So, the salary is divided into two parts. 10% is paid directly to them as pocket money, enough for their expenses in Hong Kong. The remaining 80% is transferred to their bank accounts in Hong Kong through the labor agency and paid monthly. By the time they return to Hong Kong, the money is already safely in their accounts and no one can touch it."
After listening, Chen Yong's eyes lit up, and he nodded repeatedly: "This is a good idea! My dad was worried that those people would waste money, and you've solved that problem for him right away."
"Also, make sure they buy insurance in China, including accident insurance and medical insurance. It only costs about a thousand yuan a year, so they'll have a safety net if something happens."
"Okay, I've written it all down."
Chen Yong pulled a crumpled notebook from his pocket, uncapped the pen, and began writing down items one by one, muttering to himself: "Chartered plane, registering a labor service company in Hong Kong, cousin as the contact person, wages paid in two installments, insurance..."
He looked up and closed his notebook: "Ah Zheng, don't worry, I'll keep an eye on this. Nothing will go wrong."
Chen Zheng patted him on the shoulder: "I trust you to handle things."
"By the way, are there any women here this time?"
"Yes! There are a dozen or so women, all of them skilled workers who have experience on construction sites."
Chen Zheng: "From now on, let them take care of the kitchen."
Chen Yong responded.
As the two walked back to the camp side by side, they saw Assam waving and running towards them.
"Boss!"
"Your mouth is all split open, what's got you so happy?" Chen Zheng said, pointing at the other person.
Assam ran over, still panting, his eyes gleaming with excitement. "Someone saw a civilian plane land at the airport in Somaliland, and Tamir Pardo got off!"
Mr. Chen frowned. "This name sounds familiar."
"The head of the Israeli Mossad!!!"
Chen Zheng immediately raised his head.
"Boss, should we take him down?!" Assam rubbed his hands together.
"How do we do it?"
"We can launch a surprise attack!"
Chen Zheng looked at him like he was an idiot. "Do you think we have that capability? Besides the local army, Somaliland also has Ethiopian special forces trained by Israel. Wouldn't we be walking into the lion's den?"
Even the Delta could be defeated and sink in Mogadishu...
Boss Chen didn't think his newly trained troops could pull off any amazing feats.
Assam's face stiffened upon hearing this. "Then... then we just give up like that?"
As if sensing the resentment in his tone, Chen Zheng glanced at him and said, "Young man, you've been quite hot-tempered lately."
"I... I'm just feeling really pent up," Assam said, his face flushed.
Chen Zheng let out a sigh of relief. "We can't handle this ourselves; we'll have to find outside help!"
"Who should I look for?"
"Could they bomb it from Yemen all the way to Somaliland?"
Assam frowned. "But the Houthi rebels in Yemen don't have missiles. The Scud missiles they can hit are in the hands of the government forces."
"If we don't have it, we'll build it... uh... it seems we can't build it right now... so let's find someone else!"
Chen Zheng rolled his eyes, revealing his lower body, and asked, "Can you get it from your former boss?"
"You mean Muhsen?"
Chen's expression turned serious. "At this time, please call him Imam!"
Assam: "..."
Damn, your bottom line is really flexible!
……
You'll Also Like
-
Marvel: I became an ancestor by sacrificing offerings
Chapter 454 5 hours ago -
Honkai Impact, I'm not a Ditto!
Chapter 481 5 hours ago -
Under One Person: I can manipulate magnetic fields!
Chapter 838 5 hours ago -
Minecraft: Steve came to the back room
Chapter 384 5 hours ago -
Death: This Death is a bit unorthodox.
Chapter 431 5 hours ago -
Tokyo: Idol Girls have absolutely no bad intentions!
Chapter 244 5 hours ago -
I started on a deserted island and encountered Ying Zheng, who insisted I was an immortal.
Chapter 97 5 hours ago -
My Yandere Mechanical Wife
Chapter 681 5 hours ago -
Collapse Iron Cosplay Battle Damaged Star Spinal Cut - Everyone Cries to Death
Chapter 353 5 hours ago -
Divine Realm: Starting with the Broken Bone Dragon
Chapter 267 5 hours ago