In the 90s, you could acquire max-level skills every 14 days.

Chapter 144 The Confidence to Burn the Boats

Chapter 145 The Confidence to Burn the Boats

Several people gathered around the main steam pipeline of boiler number one.

The faulty safety valve was stuck at the junction of the pipes; from the outside, only a fist-sized cast iron piece was visible, covered with a layer of scale.

The three Germans stood to the side, not saying a word, just watching.

Zhang Yong didn't stand on ceremony. He immediately took out his asbestos gloves, put them on, and touched the valve body with both hands.

[Automotive Repair Lv.5: Mechanical Sensing - Start-up]

The valve body temperature is approximately 47 degrees Celsius, and the stress is concentrated on the mating surfaces of the valve seat and valve core.

The outer diameter of the valve core is a bit too large.

It's probably due to expansion.

Thermal expansion.

Zhang Yong closed his eyes, touched the sealing surface, and circled it once, getting a sense of what was going on.

The valve core was not burned out; it was simply stuck due to thermal expansion.

Zhang Yong withdrew his hand and stood up.

"Teacher Fang," Zhang Yong said, "I guess the valve body isn't broken."

Fang Qiming leaned forward: "What do you mean?"

"I just saw in their technical manual that the design tolerance of this valve core model is calculated based on the low-sulfur bituminous coal operating conditions in Germany. With a sulfur content of less than 0.5%, the combustion temperature is relatively uniform."

Zhang Yong patted the black ash off the valve body twice.

"We've visited many factories these past few days, and the coal burned here in Tongxian is all high-sulfur coal. The sulfur content can reach up to 3%, and the local combustion temperature is more than 100 degrees Celsius higher than that under German conditions. Their DIN standard doesn't even take into account thermal expansion and deformation under such high temperatures."

Zhang Yong turned to look at Klaus.

"The valve core isn't broken; it's just that thermal expansion and contraction have locked it inside the valve seat. Your design isn't suitable for China's coal and water conditions."

The translator quickly translated the words into German.

Klaus's expression changed repeatedly after hearing this, and he remained silent for a long time.

He whispered a few words to his colleague next to him, then walked a few steps to the valve body and bent down to examine it.

After a while.

Klaus uttered a single word in German.

The translator opened his mouth, glanced at Director Xue, and then didn't dare to translate.

"What did he say? Turn it over!" Factory Director Xue exclaimed anxiously.

The translator swallowed hard: "He said—this possibility exists in theory, but we need to contact the German headquarters and have them send someone over to verify it with instruments."

Zhang Yong smiled.

"Why bother with all that? I can verify it right now."

He crouched down, first loosened the limiting bolt on the side of the valve body, and then slowly pushed it up with a set screw tool to remove the valve core from the valve seat.

After removing the valve core, Zhang Yong measured its outer diameter with calipers.

"Your technical manual says the value is 22.00 millimeters, but my actual measurement is 22.05 millimeters. That's five micrometers more."

He handed the calipers to Klaus.

"These five 'wei' are the result of the cumulative thermal expansion caused by the repeated exposure to high temperatures of high-sulfur coal. In your original design, only two 'wei' of thermal expansion margin was left, which is simply not enough."

Klaus didn't ask for a translator; he took the calipers himself and measured it again.

The numbers are there, there's nothing to argue about.

He put down the calipers, turned to the translator, and said something.

The translator said, "Mr. Klaus admitted that the DIN standard did not specifically test for high-sulfur coal conditions when it was developed."

Zhang Yong nodded.

"Therefore, as long as you machine off five threads from the outer diameter of the valve core and add a soft metal gasket to the sealing surface, it can be restored to normal operation."

Factory Director Xue's eyes widened: "The car lost five millimeters? It's that simple?"

"The principle is simple," Zhang Yong glanced at him. "But the precision of those five threads is not simple."

At this moment, Liu Liang, a graduate student who had been standing silently at the back, tugged at Zhang Yong and pulled him aside.

"Yongzi, please listen to me." Liu Liang tugged at his sleeve.

"This is not like those big, rough, black boilers from the Soviet Union; the German-made ones are much more refined."

"Moreover, that valve core is made of a heat-resistant alloy, which is extremely difficult to manufacture. If it's messed up, a batch of medicine worth tens of thousands of yuan at the pharmaceutical factory will be wasted, and none of us can afford to compensate for that!"

Zhang Yong patted him on the shoulder.

"Liu Liang, you're right, there are indeed risks."

He paused for a moment and looked at Director Xue, who hadn't said a word.

"But do you think Director Xue's pharmaceutical factory can afford to wait a month for the Germans?"

Liu Liang shook his head, speechless.

Zhang Yong turned around and looked at Director Xue.

"Director Xue, I need a manual lathe."

Fang Qiming also asked, "Director Xue, does your factory have a machine repair workshop?"

"Yes! We have a Shanghai-made C620 conventional lathe. It's a bit old, but we've been using it for a long time without any problems!"

Xue Liancheng answered without hesitation. He knew that the car would need repairs anyway, whether it was for parts or for German parts that would arrive a month later. He might as well take a gamble, since he had the backing of Peking University. The bold would get rich while the timid would starve.

Let them do it!

"That's enough." Zhang Yong took off his white shirt, leaving only his work vest, revealing his muscular arms.

"Wei Shuyun!" he called out towards the door.

The jeep door slammed open, and Wei Shuyun ran in carrying a drawing board, her ponytail swinging behind her head.

"I'm here! Do you want the drawings done right now?"

"Yes. Can you do the valve core correction diagram?"

Wei Shuyun placed the drafting board on the iron table in the boiler room and took out a compass, set square, and red and blue pencils from her waist bag.

"Absolutely. You provide the data, and I'll draw it."

Inside the boiler room, Zhang Yong stood next to Wei Shuyun, reporting out the corrected dimensions of the valve cores in sets.

The outer diameter turning amount, the depth of the sealing groove, and the fitting clearance of the soft metal gasket are all accurate to the micrometer.

Wei Shuyun's pen never stopped.

Use a compass to draw arcs, a set square to draw lines, and alternate between red and blue pencils.

Fang Qiming also took measurements on the side, and in just fifteen minutes, a valve core correction drawing was completed.

Klaus walked over at some point, looked down at the blueprint, and frowned.

He pointed to the location of the sealing groove and said a sentence in German.

The translator said, "He asked, 'What material is this soft metal seal made of?'"

"Pure copper wire." Zhang Yong said without even looking up.

"A 0.3 mm annealed copper wire is wrapped twice and pressed into the sealing groove. When heated, the copper wire will undergo a slight plastic deformation, which perfectly compensates for the additional expansion under high-sulfur coal conditions."

After the translation was completed, Klaus fell silent.

He took off his glasses, rubbed his eyes, put them back on, and looked at the blueprints again.

Then he called over two other Germans, and they all came together to look at the blueprints.

It only took a minute for the group to go from being quiet to arguing.

The three spoke very quickly, and the translator seemed hesitant, as if unsure whether to translate or not.

Factory Director Xue couldn't help but whisper and ask, "What are these three blond guys saying in their gibberish? Do they disagree?"

"You want to fight us?"

The translator hesitated for a long time before finally uttering the words: "The three of them thought Zhang Yong's method would work, but they didn't expect the actual situation to deviate so much from the original factory standards."

After a heated discussion, Klaus and his two companions, perhaps feeling awkward staying there, all left the boiler room.

The translator quickly chased after them.

Factory Director Xue called out from behind, "Since the experts haven't said it's no good, why don't you pour them some more tea and let them sit a little longer!"

Zhang Yong handed the drawings to Teacher Fang for confirmation.

"Let's continue."

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like