On Monday afternoon, he set up the Sony A6400.

The camera belonged to Robert's daughter when she went to college. The body was slightly worn, but the lens was well-maintained. Lin Yuan mounted it on a tripod, aimed it at the anvil area, and adjusted the angle several times. In the viewfinder, the curved surface of the anvil and the wooden handle of the forging hammer formed a diagonal line, with a dark red brick wall in the background. Light streamed down from the high window on the side, casting a soft, diffused reflection on the metal surface.

He tried swinging the hammer a few times in the air, then looked back at the image—the hammer's trajectory was exactly in the center of the frame. No need to adjust it anymore.

He had no classes on Tuesday morning. He got up early and went to the workshop to photograph the materials.

He took a small piece of patterned steel billet from the materials shelf—it was specially prepared last week for the filming, made by alternating layers of 1084 and 15N20, repeatedly folded and forged and welded, and finally pressed into a rectangular billet.

He smoothed the cross-section of the cooled billet with sandpaper and applied a little ferric chloride solution. A few seconds later, alternating light and dark layered textures gradually emerged, resembling tree rings or compressed geological layers. He took a close-up photo of the cross-section using a macro lens. In the image, the boundaries of each layer were clearly defined; the thinnest layers were less than half a millimeter, but there was no overlap. This indicated that the temperature and pressure were precisely controlled during forging and welding, allowing the two types of steel to truly fuse together at high temperatures.

After filming the patterned steel, he laid out the raw materials of 1084 and 15N20 side by side, measured their thickness with calipers, and added a few more shots. During post-production editing, he added subtitles to the footage, simply indicating the carbon content of the two types of steel and their respective functions—1084 provides hardness, 15N20 provides toughness, and after pickling, one appears dark and the other light, which is how the contrast of the pattern is created.

The forging process was filmed on Wednesday afternoon.

This part was the most grueling. He had to work while ensuring the image remained in focus, the hammer's impact point couldn't stray out of the frame, and the control of the heat couldn't be compromised by distraction. He set up the camera in three positions—a panoramic shot of the entire work, a medium shot of the anvil, and a close-up of the furnace opening. He stopped to adjust the camera at each crucial point, breaking the forging rhythm into intermittent bursts. But he wasn't in a hurry. Robert had said that judges don't watch videos to see how fast you work, they watch to see if you're doing it correctly.

The steel billet, heated to a bright orange, was removed and placed on the anvil. The hammer fell with a steady, powerful rhythm, each strike landing precisely at the pre-planned point. He had previously drawn a sketch, breaking down the blade's arc into a dozen or so consecutive hammer blows, each corresponding to an angle from the hilt to the tip. This wasn't something his father taught him—his father forged swords with decades of experience, needing no thought before the hammer fell. But he had his own method, integrating ancestral experience with modern precision planning.

The sound of the hammer echoed through the red brick house, faithfully captured by the camera's microphone. He didn't add background music or filters. The color of the flames, the patina of the metal, the tiny sparks flying as the hammer fell—these things themselves were the best imagery.

The finished product will be photographed on Thursday.

He had spent two whole days sharpening that knife. He went from 400 grit to 2000 grit, without skipping a single level. The final blade had a warm, matte finish, not glaring, but when spun in the light, you could see the metallic lines following the curve of the blade, like water flowing over stone. The handle was made of stabilized wood, a dark brown base with golden grain, and felt warm to the touch after polishing. He placed the knife on his workbench, shining it under different lights, and filmed dozens of shots. Only a few were ultimately chosen. Robert had said the video was only five minutes long, and every second had to be used on the blade.

I went back to my dorm on Thursday night to edit videos.

Matt was sprawled on the sofa playing video games, wearing headphones, but he would peek over every ten minutes or so. This time, he didn't interfere much—probably because Lin Yuan's expression told him this wasn't the right time to joke around. He only stood behind Lin Yuan for two minutes while he went to the refrigerator to get a drink.

"This shot is good." He said, then went back to playing his game.

The video was edited until 1 a.m. The first draft was four minutes and forty-eight seconds long, twelve seconds shorter than required. Lin Yuan watched it three times from beginning to end, making sure that every transition was perfectly timed and that the narration's pace was synchronized with the visual changes. He didn't add any fancy special effects, only the most basic fade-in and fade-out. The visuals themselves were enough.

He exported the video, saved a copy on his phone, intending to show it to Robert the next day. Then he turned off the computer and lay down on the bed.

The system panel flashed briefly before he closed his eyes.

[Forging Skill: Expert (8910/10000)]

I'm still a little over a thousand points short. If I pass the preliminary rounds, I'll go straight to Master level. If I don't, at a normal leveling pace, it'll probably take another two or three months.

He turned over and went to sleep.

-----------------

On Friday afternoon, Lin Yuan showed the video to Robert.

Robert sat in the old chair against the wall in the workshop, his laptop resting on his lap, and read it from beginning to end. After finishing, he didn't say anything, but dragged the progress bar back to the forging process and watched it again. Then he took off his glasses, wiped the lenses with the hem of his shirt, and put them back on.

"The narrator's pronunciation is better than before," he said.

"I practiced for a while."

"I can tell." Robert closed the laptop and handed it back to Lin Yuan. "Overall, there aren't any major problems. The editing is clean, and the forging steps are clear."

Lin Yuan took the computer and waited. Having dealt with Robert for a long time, he knew that this kind of opening was usually followed by a "however".

"However, there's a problem with the forging scene."

Lin Yuan leaned closer.

Robert reopened his computer, dragged the progress bar to the middle of the forging process, and froze the shot at the moment Lin Yuan took the steel billet out of the furnace. "Look here. You're standing in the backlight, and your shadow blocks most of the hammer's trajectory. The judges want to see the landing point and force, but it's not clear in the shot." He dragged the camera back a little, "And this medium shot is too low. The curved surface of the anvil is blocking the point where the hammer head contacts the steel billet. These two shots are the most crucial parts of the entire video."

Lin Yuan examined the screen closely. Indeed, the moment the hammer struck the steel billet, half of it was obscured by the edge of the anvil. The light of the flame was filmed to create a good atmosphere, but the audition video wasn't a documentary; it needed to clearly demonstrate the technical details.

"And here too." Robert dragged to the quenching section, "When you turn around to quench the fire, you're out of frame, but the camera doesn't move. There's a gap of about three seconds. It's not long, but the rhythm is broken, which will give the judges a bad impression."

Lin Yuan looked at the three-second empty shot on the screen and nodded. At the time, he was focused on the forging itself. Although he had checked the composition, it was indeed impossible for one person to pay attention to some details while forging the knife and watching the monitor.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like