I can travel back and forth in 1986

Chapter 125 Successful Trial Production?

Chapter 125 Successful Trial Production?

Zhang Beichuan perked up and strode to the worktable.

Li Weiguo pointed to the mold on the table, his voice hoarse with excitement.

"Factory manager, we have not failed you! The experienced workers at Factory 715 in the provincial capital have produced the goods strictly according to the blueprints, and the precision is fully up to standard. Please take a look!"

Zhang Beichuan bent down, gently running his fingers across the smooth surface of the mold, and then asked the factory's technician to bring a vernier caliper to check the mold's precision again.

Technician Lao Wu carefully measured the key dimensions of the mold with calipers.

The workshop was so quiet that only the faint metallic scraping sound of the caliper sliding could be heard. Everyone held their breath, their eyes focused on the vernier caliper.

"Factory Manager, look." After measuring the last data, Old Wu straightened up with a relieved smile on his face. "The length, width, thickness, and the depth and spacing of these slots all match the dimensions on the drawing, and the errors are all within the allowable range."

He handed the notebook containing the data to Zhang Beichuan, who then carefully checked each line.

The data is indeed very close to the parameters of the drawings he obtained in 2026. The error in some parts is only 0.015mm different from that in the drawings.

"Great!" Zhang Beichuan closed his notebook, a satisfied smile spreading across his face. He patted Li Weiguo on the shoulder. "You've worked hard; the trip to the provincial capital wasn't in vain. Getting the molds back so quickly is all thanks to you!"

Li Weiguo smiled憨厚ly and rubbed his hands together.

"It's all thanks to the factory manager's excellent blueprints and the skilled craftsmen at Factory 715."

Liu Jianguo chimed in from the side, his tone filled with eager excitement.

"Factory manager, now that the molds have arrived and the precision has been tested and found to be fine, shouldn't we hurry up and try a small batch?"

Zhang Beichuan paused for a moment, then asked, "Have all the raw materials arrived?"

"They've arrived. The resin materials for the outer casing and the custom-made hardware materials were in the warehouse this morning. The butane filling equipment should arrive first thing tomorrow morning."

Lan Baojun, who was standing to the side, added as needed.

Zhang Beichuan glanced around at the expectant eyes of the workers, nodded, and decisively gave the instructions.

"Alright! Comrade Jianguo, you arrange the people and prepare the machines. We'll try it out this afternoon. What do you think is a suitable trial production number?"

The purpose of trial production is twofold: firstly, to verify the precision of the mold, and secondly, to verify defects in the production process.

Taking into account both efficiency and achieving trial production, Li Jianguo held up five fingers.

"Factory manager, I think we should start with a trial production of 500 units. This way, we won't waste materials and we can still achieve the verification goal."

"So, how long will it take to trial-produce 500 shells?" Zhang Beichuan asked.

After all, he didn't know much about the production process.

Li Jianguo quickly calculated in his mind that the mold preparation and calibration would be completed in about an hour.

Once we get to the production stage, even if we encounter some minor issues during the first production run of 500 shells, it will only take about an hour.

The most troublesome and time-consuming part is process debugging.

This is the most uncontrollable part of the entire trial production process.

Because Dongfeng Injection Molding Plant had absolutely no experience in producing lighter casings before, they were lucky enough to adjust the process in 1-3 hours.

If you're unlucky, it might take 1-3 days of repeated adjustments before you can finally determine the correct process for debugging.

After hearing this, Zhang Beichuan was completely stunned.

He had anticipated some setbacks with the current level of technology and the first trial production, but he never expected so many.

But with the arrow already on the bowstring, he had no choice but to nod.

"Then let's get started immediately and strive to begin trial production." Considering that tomorrow is the weekend, Zhang Beichuan added, "All employees who may work overtime tonight and tomorrow weekend will be paid double their daily wage!"

At Zhang Beichuan's command, the entire Dongfeng Injection Molding Plant immediately sprang into operation.

Liu Jianguo quickly organized a team, with Li Weiguo as the technical backbone and several experienced masters, to carefully install the brand-new mold onto the injection molding machine that had just been overhauled.

Lan Baojun then arranged for people to move the prepared resin raw materials from the warehouse to the workshop and to take inventory of all auxiliary tools.

The preparations for the entire trial production lasted from the afternoon until the evening.

The workshop lights were as bright as day, illuminating the workers' tense and focused faces.

Although Liu Jianguo had emphasized the complexity and uncertainty of process debugging beforehand, everyone was determined to succeed.

The factory manager offered double overtime pay and brought in a brand new project and hope; everyone wanted to make a good start.

"Power on, preheat!" Li Weiguo stood beside the machine, giving instructions in a calm voice.

The deep rumble of the machines filled the workshop as the heating system began to operate. Technicians kept a close eye on the temperature parameters on the instrument panel, making minor adjustments from time to time.

Zhang Beichuan also stood aside, patiently waiting.

During the first trial molding, obvious flow marks and shrinkage appeared on the surface of the product after demolding.

"The temperature might be too high, and the pressure holding time might be insufficient." Old Wu picked up a defective product, examined it carefully, and quickly gave his judgment: "Adjust the parameters, lower the temperature by 5 degrees, and extend the pressure holding time by 3 seconds."

The second trial molding improved the shrinkage problem, but flash appeared.

"The pressure is too high, and the clamping force may need to be fine-tuned."

"Reduce the injection pressure and increase the clamping force slightly."

The third time, the fourth time... Time flew by with each adjustment, and it was already pitch black outside the window. The clock in the workshop pointed to one o'clock in the morning.

No one complained or said they were tired; the workers took turns operating the equipment and resting.

The technicians gathered together, arguing, analyzing, and recording the failed samples one by one.

Around 4 a.m., the product, after another adjustment, was demolded.

Li Weiguo held the still-warm shell up to the light, examined it carefully, and then stroked the surface with his hands. Finally, a smile appeared on his face.

"Factory Manager, Factory Manager Liu, look at this!"

Zhang Beichuan and Li Jianguo immediately went over and saw that the shell surface was smooth and flat, without any obvious flaws, and it looked pretty good.

"Quick, get the vernier calipers!" Liu Jianguo shouted.

The measurement results came out quickly, and the key dimensions were basically stable within the tolerance range.

"It's done! We've roughly found the process parameters!"

A cheer erupted in the workshop. Although the process had only been initially stabilized, it meant that the most difficult hurdle had been overcome. With continuous optimization and adjustments, the optimal process parameters could be found.

Everyone's spirits lifted, and their drowsiness vanished.

As dawn broke, and after continuous adjustments and trial and error by the technicians, the rhythm became noticeably smoother this time.

Lighter casings are injection molded one by one, and after a short cooling period, they are carefully removed by workers and placed into a nearby storage box.

Although the speed is not very fast, and occasionally one or two slightly defective products still appear, the proportion of qualified products is steadily increasing.

As the morning sun shone through the workshop windows at 10 a.m., the last batch of casings rolled off the production line.

"Factory manager, all 500 outer shells have been produced!"

Two crates filled with outer shells were lifted onto the worktable. Zhang Beichuan walked over, picked up one of the shells, and compared it with an outer shell that Lan Baojun had brought from 2026.

Everyone held their breath, their eyes fixed on Zhang Beichuan's hands.

In terms of size and shape, they fit together perfectly to the naked eye, almost identical.

He weighed it in his hand and felt it was about right, then carefully checked the details such as the buckles and air intake.

"Good!" Zhang Beichuan raised his head, a relieved and joyful smile spreading across his face. "Comrades, we succeeded!"

"Very good!"

"It's done! It really worked!"

The workshop erupted in cheers and applause. The fatigue from nearly 20 hours of continuous work seemed to vanish in that moment.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like