I can travel back and forth in 1986

Chapter 132 Old ginger is spicier

Chapter 132 Old ginger is spicier

Jiang Zhengbang led Zhang Beichuan and Chen Mo out the door and turned into a smaller factory next door.

"Old Li, are you busy? Can I borrow your precious machine?" Jiang Zhengbang was obviously very familiar with the owner here, and he called out as soon as he entered.

The middle-aged man, known as Old Li, poked his head out from the inner room, looked at the mold in his hand, and roughly understood what was going on. He then smiled.

"Old Jiang, what a rare guest! Using a coordinate measuring machine? No problem, we're having lunch right now, you can cook for yourself."

The group entered the workshop, where a coordinate measuring machine appeared before them.

Jiang Zhengbang skillfully turned on the machine and then placed the mold on it.

As the measuring instrument is started, the probe begins to move slowly and precisely along the surface of the mold cavity.

On the computer screen, a complex 3D model gradually builds up, with a series of data displayed in real time next to it.

Dimensions, roundness, cylindricity, flatness, positional accuracy...

Zhang Beichuan was also seeing this thing for the first time, and his eyes were fixed on the screen.

"Look here," Jiang Zhengbang pointed to a magnified image on the screen. "Theoretically, the flatness should be within 0.02 millimeters, but the actual measurement shows a fluctuation of 0.05 millimeters. And this hole, the roundness deviation is too large... As for the airtightness..."

'

He switched the computer screen. "The wall thickness is uneven, with the thinnest and thickest points differing by nearly 0.3 millimeters. Stress concentration occurs during injection molding, and coupled with insufficient mold closure precision, air leakage is inevitable."

Chen Mo listened with great interest and was also very curious as to why Zhang Beichuan would go to such lengths to make this thing.

Having confirmed his suspicions, Zhang Beichuan nodded.

The difference between 1986 and 2026 is too great. In 1986, the most they did was use tools like vernier calipers to measure length, width, height, and aperture, and then rely on experience to judge the tightness of the fit.

Three-dimensional geometric tolerances cannot be measured at all; they can only be deduced from two-dimensional data to give a reasonable estimate.

The root cause of the problem was found: the mold's machining precision was insufficient, which made him feel relieved.

"Uncle Jiang, does that mean that if we just make sure the mold meets the required precision, the current problems will be completely solved?"

Jiang Zhengbang nodded. "With the mold precision meeting the standards, coupled with strict control of the process, the finished product yield rate can reach at least 95%, if not 100%."

Looking at the precise data comparison on the screen, Zhang Beichuan quickly made a mental calculation.

Bringing back large-scale equipment in 2026 and manufacturing molds ourselves in 1986 is too conspicuous.

Ideally, we should bring back the precise molds only in 2026.

"Uncle Jiang," Zhang Beichuan turned to Jiang Zhengbang, his tone sincere, "your analysis is exceptionally insightful. So, in your opinion, if..."

We'd like to have a new mold made to meet our precision standards. How long would it take to have it machined here? Do you have any manufacturers you know that you could recommend?

"Old Li can do it; he specializes in high-precision molds. Don't let the small size of his factory fool you; his skills are solid, and you can trust him."

After saying that, he called out to the inner room.

"Old Li, are you done? Come over and let's chat."

Old Li wiped his mouth and came out.

Jiang Zhengbang briefly explained Zhang Beichuan and his team's needs: to process a set of injection molds for lighter casings, requiring high precision, good airtightness, strict tolerances, and a robust and durable mold.

After listening, Old Li chuckled, glanced at the mold on the table, and nodded.

"It can be done. To maximize the mold's lifespan, P20 steel should be used, which can meet the requirement of an annual production of 50 pieces. From design to completion and trial molding, it will take approximately 15 days. The cost..."

Old Li smiled and looked at Jiang Zhengbang, "For Old Jiang's sake, 48000 will do."

Chen Mo first glanced at Zhang Beichuan, then at Jiang Zhengbang who was nodding.

"Alright, Uncle Li, thank you for your trouble. Please help us get a set of molds."

Old Li nodded happily, "Don't worry, I'll definitely get it done for you."

With the problem effectively resolved, the atmosphere became much more relaxed.

The three returned to the Jiang family's parts factory. Sun Hua had already cut up some fruit and brought it up. Jiang Xia also came out of the kitchen and sat down to the side, glancing at Zhang Beichuan from time to time.

Taking advantage of the opportunity, Zhang Beichuan quickly pulled his childhood friend Chen Mo aside and chatted with Jiang Zhengbang about their experience in lighter production.

Such opportunities to ask questions face-to-face are rare.

The more you learn, the fewer detours you'll take in 1986.

Jiang Zhengbang was in a good mood, as it was the first time he had seen young people so interested in lighters.

He shared his decades of hard-earned experience and the pitfalls he encountered without reservation.

Meanwhile, Jiang Xia, who had been pulled back to his room, was being questioned by his mother, Sun Hua.

"Xia, how's business at your coffee shop lately? If it's not doing well, you should close it down quickly, otherwise you'll only lose more money the longer you keep it going."

Jiang Xia knew in her heart that she couldn't hide it anymore, so she simply told her mother about the current situation.

Sun Hua stared wide-eyed at his daughter, his voice rising several octaves.

"What? You sold the car?"

Jiang Xia was startled by her mother's reaction. She shrank back, but quickly straightened her back, trying to make herself look more confident.

"Mom, listen to me... The coffee shop really can't keep going. There are so many chain brands on that street, and the price war is fierce. I can't compete with them at all."

"If you're losing money, just close down! Selling your car to open a barbecue restaurant? Are you crazy?"

Sun Hua cursed at her, then remembered another problem: the car he bought for his daughter was several years old and should still be worth about 100,000 yuan.

Renovating the coffee shop into a barbecue restaurant would cost at least 200,000 yuan, and if the renovation were more upscale, it could easily cost 300,000 to 400,000 yuan.

Where will she get the rest of the money?

"You...you, where did you get the rest of the money? You didn't sell the dowry your father and I prepared for you, did you?"

Seeing his mother's face turn red with anxiety, Jiang Xia quickly said...

"Mom, how could I dare? How could I sell the house without discussing it with you?"

Sun Hua still looked at her with suspicion, feeling somewhat uneasy.

When Lao Jiang said he would buy his daughter a house in Chengdu as a keepsake, she was not too keen on putting it in her daughter's name directly. She thought they could change it after she got married.

Looking back now, my initial concerns were justified; this girl is getting bolder and bolder!

"Then tell me, where did you get the rest of your money? Don't try to fool your mother. I've been in business for so many years, I'm not that easy to fool."

Jiang Xia smiled and had no choice but to reveal Zhang Beichuan's identity.

"Mom, let's open a barbecue restaurant. I'll partner with him. We'll each contribute 100,000 yuan, and each take 50%. Besides, I think what he said makes a lot of sense. Summer is just around the corner, and the barbecue in Chengdu is notorious for its poor quality. Maybe our people-friendly approach can be quite successful..."

'

After hearing her daughter's explanation, Sun Hua breathed a sigh of relief, but then she thought about it again and felt that something was wrong.

"Xia, what can I say to you! You're supposed to be running your own business, but when you partner with someone, how can you expect everyone to take half the profits?"

Jiang Xia paused slightly, somewhat not understanding what her mother meant.

Looking into his daughter's clear eyes, which held a hint of bewilderment, Sun Hua sighed helplessly.

"Let me ask you this: if it's 50/50, who makes the decisions in the store? And if problems arise, whose opinion prevails?"

Jiang Xia blinked. "Mom, is it necessary to be so clear about things? Usually, he's busy with his own things, and I'm the one who makes the decisions at the shop. I only consult him when I'm really unsure about something. Besides, he's not that kind of person."

"Mom didn't mean Xiaochuan was a bad kid. I met him today, and he really seems like a good person." Sun Hua patted her daughter's hand. "But business is business, and personal relationships are personal relationships. You think everything is good now because you have a good relationship, and he really helped you."

"But what if the business takes off and makes money in the future, or... or what if you two have a falling out over something? This equity structure will become a big problem. Even brothers have to keep clear accounts."

Jiang Xia bit her lip, lost in thought.

She really didn't think that much about it; she just felt that Zhang Beichuan's willingness to invest money when she needed help the most was already a huge sign of trust and support.

Besides gratitude, there was also a secret fondness in my heart, so I wouldn't care about these details.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like