The next morning, the basic mechanical engineering class covered the forces acting on materials.

The teacher took a section of copper pipe and gently pressed it on the podium.

The pipe wall was not broken.

A fine crack appeared at the bend.

"Some problems are not visible when viewed from the side."

"It will only be revealed when it is subjected to force."

Lin Xiuhe put the connector she had taken apart yesterday in her desk.

Four.

The cracks are all next to the weld joint.

Li Mingyuan picked it up and looked at it for a long time after class.

"Everything is in one place."

"Um."

"The materials may be faulty, and the welding method may also be problematic."

Zhao Guodong moved the chair forward.

"Old Shao said the same thing last night."

"Shall we check the welding station first today?"

Lin Xiuhe closed her class notes.

"Check the remaining five units first."

"Let's take a look at how the welds are made."

Zhao Guodong stood up and picked up his toolbox.

"I'll follow your arrangements this time."

At 10:30, the three people entered the North City Factory on time.

The remaining five refrigeration units for the refrigerators have been placed outside the leak detection area.

The compressor, copper pipes, and electrical components are all mounted on a base frame. After passing the trial run, it is sent to the assembly plant to be installed in refrigerated display cases used in food stations and grocery stores.

Chen Sanshou was in front.

Each unit's outer casing has been re-numbered.

One to five.

The characters are crooked, but still legible.

He pointed to the first one.

"I arranged them according to the order they went online."

"Anyone who tries to cut in line, I'll tell them to go find Director Ma."

The worker pushing the cart next to him laughed at him.

"Yesterday they complained about the trouble of marking, but today they're guarding it more closely than anyone else."

Chen San tucked his gloves into his waistband.

"Even if you take on two more burdens, you can still hold the fort."

Wu Guifang is checking for leaks by the water tank.

Upon hearing this, she raised her chin.

"Be poor."

"Comrade Lin is here, let's get to work."

Ma Jiancheng came over from the welding station, his eyes were bluish, he hadn't slept well all night.

He handed yesterday's records to Lin Xiuhe.

"All six cracks are located in the same spot."

"That batch of materials in the warehouse has been sealed off."

"There are only five left today, how do we check?"

"Check for leaks first."

"Tear down the parts that are leaking."

"Even if there are no leaks, take one out and remove the weld joints."

Sun Dayong, standing next to welding station number two, heard this and his expression turned grim.

"Why tear it down if it's not leaking?"

"Whose responsibility is it if it gets damaged?"

Old Shao put the wrench on the table.

"We're not disassembling the welds, we're not smashing the entire machine."

Sun Dayong wanted to argue, but Ma Jiancheng spoke first.

"The 11th channel almost got sent out yesterday."

"Don't try to save me any effort today."

The first unit was connected to the air pressure.

Wu Guifang pressed the copper pipe connector into the water tank, and a series of small bubbles quickly appeared at the weld.

The second one also leaked.

The water surface at the third station remained consistently calm.

Wu Guifang wiped the sweat from her forehead with the back of her hand.

"This one is approved."

Lin Xiuhe did not allow anyone to push her away.

"Leave."

Sun Dayong immediately spoke up:

"It's all over, what's the point of keeping it?"

"Smoke it."

Zhao Guodong waited until she finished speaking before opening the toolbox.

After the outer casing is opened, the surface of the connector is flat.

There are no cracks.

Sun Dayong breathed a sigh of relief.

"See?"

Lin Xiuhe told him to turn the connector in a different direction.

The back of the weld joint is noticeably darker in color.

Old Shao gently rubbed it with a file.

Once the glossy surface layer peels off, a thin crack is revealed underneath.

It hasn't leaked completely yet.

It's hard to say what will happen if we keep running for a few more days.

Wu Guifang gasped.

"If it weren't taken apart, who would be able to see it?"

Chen San stood by the sink, his face changing.

"No bubbles appeared during the leak detection."

"If they return it later, it will be blamed on us again."

Sun Dayong squatted down next to the crew and reached out to touch the crack.

"There's something wrong with the material."

Old Shao shook his head.

"The material is not good."

"The weld is too tight."

"The entire force is concentrated on this one point at the bend; it would be strange if it didn't crack."

Sun Dayong stood up.

"We've always welded like this."

"The materials used before were thicker."

Lin Xiuhe took out the piece of copper pipe from the classroom.

"This batch of material is thin."

"The welds and retaining plates remain the same."

"It won't just be one crack; it's the old method."

She handed the copper pipe to Sun Dayong.

"Give it a try."

Sun Dayong took it and pressed it down with both hands.

The copper pipe was not broken.

The bends first turn white.

The resentment on his face gradually faded.

"Then we'll have to modify the weld."

"How should we change it?" Ma Jiancheng asked.

Old Shao said:

"Eat less welding, and move the bends back."

Sun Dayong added:

"The fixing plate should not be placed too close."

After they finished speaking, they each stared at the connector in their hands.

Yesterday, they each held their own version of events.

We ended up talking about the same thing today.

Lin Xiuhe walked to the welding table.

"Let's make one first."

"Use the remaining new material before sealing it up."

"Change it as you just said."

Sun Dayong rolled up his sleeves.

"I'll do it."

Mars quickly lit up.

Old Shao stood by and watched.

The weld joint is narrower than before.

The fixing plate was also moved back one finger.

After the connection cooled down, Chen San personally pushed the unit to check for leaks.

A crowd had gathered around the sink.

Sun Dayong kept saying "Go get to work," but he himself stood closest to the work station.

Connect the pipeline to the air pressure.

Welds and joints are immersed in water.

After a while, there was no movement on the water.

Chen San increased the pressure again.

There were still no bubbles.

He lifted the connector.

"Passed."

Sun Dayong took it and looked at it again and again.

"Test run".

The unit was pushed onto the test stand.

Once the power is connected, the compressor starts running.

The sound is smooth.

The pointer is also stable.

Ma Jiancheng stood by and didn't breathe a sigh of relief until the test run was over.

"OK."

"Weld it like this."

Sun Dayong compared the new connector with the old one.

One weld width.

A narrow one.

The differences are small, but the results are completely different.

After a moment, he waved to the welding team.

"Come here, everyone."

"The next batch of fixed films will be postponed."

"Don't make the weld joints so stubborn anymore."

Several workers from the group gathered around.

Someone asked why.

Sun Dayong pointed to the section of copper pipe that Lin Xiuhe had brought.

"Thin filling."

"If you keep doing it the old way, it'll crack sooner or later."

After he finished speaking, he added:

"Comrade Lin found out."

Everyone in the workshop heard it.

Zhao Guodong grinned.

Li Mingyuan stood in front of the production sign and wrote down the new practices.

Only two lines were written.

The fixing plate is moved backward.

The weld joint narrows.

Wu Guifang pushed the next generator set over.

"Will this reduce the refund?"

"Let's run a batch first and see," Lin Xiuhe said.

"That's too little. I'll treat you to dinner."

Chen San laughed from the side.

"Are you willing to part with it?"

"One less return, two fewer trips."

"How could I bear to part with it?"

Ma Jiancheng took down the production sign for the day and handed it to Lin Xiuhe.

"You line up."

Sun Dayong raised his head.

"She's in line?"

"She's in line."

Ma Jiancheng pointed to the eleven generating units in the repair area.

"It was her who stopped the shipment yesterday."

"She was also checking the welds today."

"Anyone have any objections? Let the results speak for themselves."

Everyone in the workshop stopped what they were doing.

Old Shao handed over a piece of chalk.

"Don't arrange them too meticulously."

"We only have this many people, so things will still get chaotic when things get really busy."

Lin Xiuhe took the chalk.

She did not renumber all the units.

There are only three columns on the production label.

Repairing with old materials.

New method trial production.

Shipments are proceeding normally.

"Repairing old materials, Zhao Guodong and Lao Shao."

"For the trial production of the new method, Team Leader Sun will bring two people."

"Master Wu is in charge of leak detection."

"Li Mingyuan recorded the quantities for the three groups."

She would wait for a response from the other side before proceeding with the next item.

When it was Chen San's turn, he spoke first:

"I'll guard the entrance."

"We can't tell whose number it is, so don't put it in yet."

Ma Jiancheng nodded.

"Let's do it this way."

The workshop, which had been in complete chaos all morning, finally came into order.

The unit under repair is to the left.

The prototype unit is in the center.

Normal shipments go via the right side.

The cart pusher would sometimes go the wrong way at first.

Chen San called out twice from the entrance, and then the person turned back.

By evening, eight units of the new method had been produced.

Not a single one was returned.

This batch of refrigerated display case units is scheduled to be delivered to the regional food company at the end of the month. Every extra day the Beicheng plant delays delivery, the entire equipment manufacturer will have to wait as well.

Wu Guifang lifted the last leak detection connector out of the sink and placed her gloves on the table.

"Today's efforts were worthwhile."

Sun Dayong is stubborn.

"Only eight."

Old Shao screwed the lid on the thermos.

"Yesterday you didn't even dare to protect Channel 8."

Sun Dayong coughed and turned to collect the welding torch.

Ma Jiancheng flipped the record of the day to the back.

Eleven units were returned for repair yesterday.

Today, all eight stages of the new law were passed.

He drew a line next to the three characters "Lin Xiuhe" with a pencil.

"Run ten more tomorrow."

"If we can still stabilize the situation, we'll keep this method."

Lin Xiuhe hung the production sign back on the wall.

I have two classes tomorrow morning.

Arrive before 12 o'clock.

"OK."

Ma Jiancheng took off the workshop timer and handed it to her.

"Once you arrive, continue queuing."

A man in a Zhongshan suit entered through the door.

Deputy Factory Director Zheng was by his side.

Sun Dayong is leading the welding team to redo the work according to the new method.

Wu Guifang called out from beside the water tank:

"Eighth channel passed too!"

The factory manager stood at the door and listened for a while.

I then looked at the three columns on the production label.

Who's on the schedule today?

Ma Jiancheng raised his hand towards Lin Xiuhe.

"she."

The people in the workshop all looked over in the direction he was pointing.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like