My Pet is a Snapping Turtle

  Chapter 435 Gone in disgrace

  Chen Shen could only sigh, and smiled bitterly. The situation at Taishan Knife had hit him too hard.

  He has worked in this industry for more than ten years, and has also worked in Shante Knives for several years. He always believes that Shante's knives are the best in the world.

  What happened next to him greatly overturned his cognition, and he felt bad all over.

   "Did you see the test situation of the Taishan knife next to it?"

   "I saw it, I really don't understand what they are doing yelling."

  Hearing that his colleagues didn't know what was going on, he felt even more bitter.

Chen Shen sighed again, "That's what they were celebrating. Their set of knives has processed more than a dozen parts in one go at a speed of 3000 rpm. The knives are not worn at all, and the processed parts are completely intact. Qualified, the appearance is very beautiful."

what!

  This is impossible!

  Sante’s people all looked dull, and it took a long time to come back to their senses. Their first reaction when they came back to their senses was disbelief.

  How can there be such alloy cutting tools in the world, if there is, it will also be born in Shante, not Taishan Cutting Tool Group.

  The two foreigners from Shante glanced at each other quietly, then nodded slightly, quietly went to the Taishan Knife, stretched their necks, and pricked up their ears.

  Among the crowd, there was another burst of cheers, and another part was beautifully processed.

   "What number is this?"

   "It is already the 21st piece, and the tool has not been worn out at all. It seems that there will be no problem in processing another 21 pieces."

   "My God, today is considered a good posture. A set of alloy tools can process dozens of parts in one go. This is the first time I have seen it."

"The key is that these parts are all made of high-temperature alloys, typical difficult-to-machine materials. The people from Shante next to them are testing knives. I heard that they can only process four parts with a set of knives, and then they have to take the knives down for regrinding. Or replace the alloy blade."

   "It's like a dream. When did our domestic alloy knives become so awesome."

  The scene was bustling, and more and more people came to see the excitement. There were almost three floors inside and three floors outside.

  The faces of the two foreigners from Shante gradually darkened, knowing that they were completely slapped in the face this time.

  The two of them lost face and returned to their side in despair. When they told the situation, all the people in Shante were shocked.

   I don’t play like this at all!

  One set of alloy cutting tools processes dozens of parts at one go, so why not try it, there is no comparison at all.

   I slipped away, I can only slip away.

  These people from Shante packed up their things and left in despair.

   Afternoon.

  This batch of parts has a total of 45 pieces. This CNC drilling and milling process may have taken two or three days, but it was completed in half a day.

   "Tsk tsk, this is too heaven-defying. There is still no obvious wear and tear on this set of knives."

   "It's really amazing, today is an eye-opener."

  “.”

  The workers and technicians on the sidelines were discussing enthusiastically, and they all admired them so much that they almost knelt down. This set of knives from Taishan Group is too awesome.

  All the parts have been processed, and all the inspections are qualified. Finally, this set of alloy tools is removed, and the magnification inspection is carried out on the tool setting instrument.

   Only a little bit of wear can be seen when magnified 30 times, and it is slightly clearer when magnified 50 times.

  Feng Xuesong was so satisfied that he burst into laughter, "Mr. Han, the wear of the tool is very small, and there is no need to sharpen it at all. It is no problem to process another 20 to 30 parts.

  At this time, Han Guang was in a very good mood.

  My heart is also full of gratitude. The black alloy cow that Brother Yong gave me has given me such a big surprise.

  He keenly realized that with this black alloy, there will be basically no business for those foreign tool manufacturers in the future medium and high-end alloy tool market.

   After the drilling and milling process, the tool test was completed, and this set of alloy tools performed perfectly, which brought a huge surprise to everyone.

  In addition to drill bits and milling cutters, Han Guang also brought several cars of alloy blades.

  Han Guangdao, "Master Feng, how about we try counting alloy blades next?"

   "Wow!" Feng Xuesong readily agreed. Seeing that the boxes of blades that Han Guang took out were all black and shiny, he cheered up and looked forward to it.

  How about the performance of such a blade, and how many parts can be turned by one blade.

   Arrange now!

  Feng Xuesong said loudly, "Where is Fan Gong, where did he go?"

   Many people looked around and looked for it.

  A technician said, "Fan Gong left long ago, he is not here."

  Feng Xuesong said slightly dissatisfied, "Playing the piano indiscriminately, why did it disappear at this time?"

  Fan Gaoyi didn't have the face to stay here, he slipped away quietly when he processed more than a dozen parts.

  He knew that he was slapped in the face today.

  The imported alloy knives he admired so much failed completely.

   Taking advantage of others not paying attention, he left in a hurry.

  Feng Xuesong personally called another senior technician and gave some instructions. Then, the trial knife of the CNC turning process began.

  The same is still a high-temperature alloy material. This material has poor turning performance, especially the wear on the tool is relatively large. If an alloy turning tool cannot turn two or three parts, it needs to be replaced with an alloy blade.

  The workers of this CNC lathe are making preparations, such as installing the shiny black alloy blade from Taishan Group, loading the parts to be processed on the workbench, and so on.

  Han Guang, Feng Xuesong, etc. were looking at the CNC machining program. After watching for a while, Han Guang said, "Director Feng, I think the parameters of the CNC machining program need to be changed."

  Feng Xuesong deeply agrees.

  So, the original processing speed was changed from 30 rpm to 200 rpm, the depth of rough turning was changed from 0.8 mm to 2 mm, and the depth of finishing turning was changed from 0.3 mm to 0.5 mm.

   After the parameters are modified, the machine tool starts and the turning starts.

  Similarly, there are many people around this CNC machine tool, including workers, technicians, and some management personnel such as team leaders.

   "Wow, the turning speed is so fast!"

   "See, at such a fast speed, the lathe does not vibrate at all, and the sound is very small."

   "This is the real moisturising."

"Really been waiting!"

  Originally, it took about 55 minutes to turn a part in this process, but the turning was completed in only 12 minutes.

  When the protective door of the machine tool is opened, the first thing everyone sees is a very beautiful part with a bright surface like a mirror.

  Experienced people know that the surface of a part is so bright, which means that the alloy tool used to process it is very sharp.

   Awesome!

Eye-opener!

  The surrounding area became lively, everyone commented, and almost everyone was full of admiration.

  Check parts, pass!

   Check the tool, there is no wear and tear, it is still like brand new!

  Second part, third part, fourth part.

  The processing lasted until the evening. There were 42 parts in this batch, and all of them were processed. The alloy turning tools had not yet reached the point where they needed to be replaced with alloy blades.

   This should be put in the past, who would believe it!

  The next day, afternoon.

  Han Guang held a thick knife test report in his hand, and brought a few samples of alloy knives, and he went to the Universal Building excitedly.

  The third update!

  (end of this chapter)