Rebirth at the beginning through the belt system, hand-made nuclear fusion

With the rapid expansion of various emerging industries in the past year, the scale of the upstream and downstream of the industry is also developing by leaps and bounds, and even in some low-tech upstream industries, there is a strange situation of short supply and tight production capacity.

For example, molds, which are widely used in the appearance parts of electronic products, have become a key blocking point restricting the rapid launch of new products on the market!

Mold, in modern industrial production used to injection molding, blow molding, extrusion, die casting or forging forming, smelting, stamping and other methods to obtain the required products of various models, appliances and standard aperture tools.

In short, mold is used to make highly standardized, large-scale product tools, this tool is generally composed of a variety of parts, different parts in the mold work process together, and finally produce the required product.

The mold is generally through the change of the physical state of the formed material to realize the processing of the shape of the article, which is widely used in blanking, die forging, cold upsetting, extrusion, powder metallurgy parts pressing, pressure casting, as well as engineering plastics, rubber, ceramics and other products compression molding or injection molding processing. Therefore, the mold must have a specific contour or cavity shape.

The specific principle will not be repeated here, in short, the mold is an extremely precise tool, the shape and structure is extremely precise, complex, need to withstand the expansion of the blank without the deformation above the fault tolerance accuracy, the structural strength, stiffness, surface hardness, surface roughness and processing accuracy have high requirements, the development level of mold production is one of the important signs of the level of mechanical manufacturing, known as the title of "mother of industry".

From the above characteristics of the mold, it can be seen that such precision tools widely used in industrial production, but its production and manufacturing is highly personalized, decentralized and customized, requiring two important prerequisites, one is a machine tool with high precision and high intelligence level, and the other is a technician, a well-trained technician!

And now the biggest problem appears in the technicians, because the explosive growth of mold demand, so that the already not rich mold technician team, there is a huge gap between supply and demand!

A skilled mold technician is not so simple to train, not only need the technician himself to have a certain spatial thinking, logical thinking, image thinking and strong hands-on ability, but also need to go through a long and long practical experience accumulation, in order to truly cultivate a qualified mold manufacturing talent!

In a sense, the training difficulty of mold technicians is many times more difficult than that of lithography machine installation technicians!

Because the installation of the lithography machine has high requirements for human stability, proficiency, etc., but it is always a few of the same steps, keep practicing repeatedly, and will always be proficient, but the mold technician is different, and the task he accepts each time is different, there are different spatial structures, and different parts are needed to finally get the mold you want.

At present, in the new dragon country, it takes an average of 10 to 15 years to train a qualified mold technician, with the miniaturization and miniaturization of various electronic products, the mold design is becoming more and more complex, the accuracy requirements are getting higher and higher, and the requirements for skilled technicians are getting higher and higher, and the training time is much longer than before!

Therefore, the talent gap of mold technicians is as big as you can imagine!

At present, the mold industry in Jiangnan is relatively concentrated, and there is a highly prosperous scene! Some factories that have the ability to produce high-precision molds have been delayed to more than one and a half years, which makes many downstream factories complain!

Now countless downstream manufacturers, squeeze the head, do everything possible, try all kinds of methods, find relationships, take doors, open high prices, want to cut the queue, first get the mold they need, the quotation of many molds, has been more than 10 times higher than a year ago, can be described as "hard to find"!

This kind of industry's high prosperity, directly prompted the skilled mold technician to rob, currently in Jiangnan, annual salary of more than one million mold technicians abound, many higher level of teachers, annual salary has exceeded five million, and salary comparison and growth rate, there is a further acceleration of the upward trend, according to this trend of development, annual salary of more than ten million mold technicians, will appear in large numbers in the near future!

In fact, the occurrence of this phenomenon is not accidental, but inevitable, which is inseparable from the educational tradition of the New Dragon Kingdom!

The people of the new dragon country have always attached importance to the education of their children, the tradition of "learning and excellence, learning and refining is business", ancient times, therefore, vocational and technical education is not valued by parents and students, and mold This kind of technical talents that require practical ability is much greater than theoretical ability, most of them are still cultivated through vocational and technical education, and are taught hand-in-hand through the traditional master-apprentice inheritance of the master and apprentice, therefore, the huge mold talent gap is also the inevitable of rapid development!

Problems like this have gradually emerged in other upstream and front-end industries, such as CNC machine operators, colorists, electricians, maintenance workers, etc., and there are more than a dozen categories, which are more or less slowing down the technological iteration speed of the rapid development of the new dragon country.

This problem has intensified, and has caused more and more obstacles to the rapid development of the emerging industry of the New Dragon Kingdom, and has become an urgent problem to be solved!

In order to truly alleviate the current embarrassing situation, there are only two ways, one is to vigorously cultivate talents, and the other is to vigorously introduce talents!

Reforming the current situation of uneven distribution of Xinlong education levels, increasing and strengthening vocational and technical education through various means, is the fundamental solution to this problem, but in order to see results, it will take at least 5 to 10 years, far from quenching the near thirst, and the role in solving the current industry dilemma is not obvious!

Another method, vigorously introducing talents, can be immediately visible in a short period of time, becoming the key to the current breakthrough!

There have also been proposals for global industrial division of labor and cooperation, to release the huge upstream industry demand of Xinlong, through the form of global industry and technology outsourcing, expand the supply of basic industries, increase upstream technology guarantees, and enrich the source of front-end industries to solve this problem, but it was rejected.

The lessons are not far off!

Whether it is an upstream industry or a high-tech industry, as long as an industry is heavily dependent on external supply, there is a danger of being pinched by the neck at any time!

In the process of development, Xinlong has been restrained in different fields almost all the time, which has left a shadow in the hearts of decision-makers, and now it is necessary to hand over the door of life to others, of course, it is not at ease!

Even from the perspective of cost-effectiveness, the cost of introducing talents is far higher than the division of labor, but in order to be able to be independent and controllable, no matter how high the cost is!

Don't say that Xinlong is narrow-minded, without the mind of global common development and division of labor!

Once Xinlong's mind was very open, broad-minded, and fully embraced globalization, but what happened?

Therefore, before the new dragon has completely controlled the strength of the world, in the current international environment where the Yangru-Sksun civilization is still dominant, it is extremely crucial to take your fate into your own hands!

So next, Xinlong launched a vigorous talent introduction campaign around the world, targeting the talents that Xinlong is in short supply in China!

With the rise of the emerging industry of the new dragon country, it is bound to bring an inevitable impact to the stable employment of related industries and vocational and technical talents in other countries around the world, because the total global demand is so large, although the progress of new technologies will bring new demand, but it also means that the demand of some backward industries and industries is partially replaced, which makes the related industries in other countries have local shrinkage and downturn, which is also a matter of no way.

These vocational and technical talents are not because of their own ability is not good, technology backward, on the contrary, because of the extreme stratification and labeling of foreign education, so that they from junior high school, high school began to receive professional, classified technician training, generally from the age of fifteen or sixteen, began to follow the master in school or factory for computer operation training, although their theoretical knowledge is not necessarily solid, but in their familiar industry field ability is not bad, can even be said to be very good, It's just that because the technical iteration ability of the new dragon country is too amazing, it quickly forms a generation gap in the industry, which makes their jobs unbearable.

In fact, since May this year, private enterprises have begun to spontaneously introduce mold technician talents from abroad, but most of them are scattered, fragmented, and most importantly, they are mainly short-term employment relationships, with high salaries as the attraction and focus, rather than in the form of permanent technical immigration.

Therefore, when the government of the New Dragon Kingdom in the official name of allowing skilled immigration to attract relevant technical talents from around the world, it has completely caused a sensation in related fields!

You know, the new dragon country is not a traditional immigration country, so foreigners want to obtain the nationality of the new dragon country, it is a very difficult thing, there is such a saying in the world, the new dragon country green card is the most difficult to obtain green card in the world, there is no one.

In the past, the issuance of the green card of the new dragon country was not only as simple as meeting the conditions, but also the total amount was controlled! In such a huge country as the New Dragon Kingdom, the green cards issued in a year are generally measured in thousands, and the difficulty can be imagined!

Now, in order to introduce high-level technicians and technician talents, the mouth of talent immigration has been opened, and countless foreigners who yearn for the new dragon country are flocking to it all of a sudden!

From the mid-August to the end of September, a large number of skilled workers and technicians with a high level of technology have joined the army of skilled immigrants through interviews, background checks, technical rating and other links. The number of personnel from various countries approved by the New Dragon Kingdom to enter the talent immigration inspection period exceeds nearly 10,000!

Personnel from various countries who enter the talent immigration inspection period, according to the principle of autonomy and voluntariness, sign labor contracts with various enterprises in New Dragon Kingdom, as long as their actual working ability is not much different from their declared ability, they will pass the examination and obtain a green card after one year.

This move of the New Dragon Kingdom is equivalent to drawing salaries from the bottom of the cauldron, which may not have a big impact in the short term, and may also open up a new market for the remaining employed population in other countries, but the elites of many other countries are very worried about this, and have repeatedly called on the government to attach great importance to this issue in various media, and cannot let the New Dragon Kingdom take away their country's talents casually, otherwise it will cause major harm to the country.

In fact, there is no need for them to say, everyone knows that this is not a very pleasant thing, the technicians and technicians who have worked hard to train in their own country, say take it away, do not even say hello, who can not be on fire? But what can be done? If you keep people, you have to solve their employment and salary problems, but now various industries and many industries abroad are half-dead, the cost is high, and now even the technology has begun to lag behind people, which will inevitably lead to the shrinkage of the overall economy, the more shrinking the environment, the more important the market of the new dragon country, the more it can not be easily abandoned!

A few years ago, the West, under the leadership of the boss, could force Xinlong to shrink in certain industries and block its international market in some industries by exerting all kinds of pressure, but now it is simply impossible to do so!

The first is that many parts of the world have broken out in such and such turmoil, resulting in all parties falling into a quagmire, there is no ability to deter to the east, and secondly, with the technological progress of Xinlong, Xinlong's products gradually cannot find similar products that can be replaced, and the technological leadership has made Xinlong slowly in the dominant position of the industry, from the previous buyer's market, to the current seller's market, not whether they want to import from Xinlong, but the problem of whether Xinlong can be sold to them!

1 nanometer chip is like this, lithography machine, diamond crystal square, super battery, super new energy vehicle, etc., all like this!

Under such circumstances, it is not a particularly difficult event for a large number of idle and unemployed technicians to be taken away by others!

The large-scale talent immigration introduction of the new dragon country this time has not only caused a sensational effect abroad, but also caused a great shock in China!

"As a world country with a large population, the New Dragon Kingdom is actually short of people! Foreign immigration is actually encouraged! "

Such an explosive news has been crowded and loud recently!

A large number of netizens have launched various forms of debate in various cyberspaces around the topic of skilled migration centered on mechanics and technicians!

Of course, like many countries in the world, the arrival of immigrants is bound to have an impact on the job market of their own countries, and they will definitely be dissatisfied and resisted by their own people!

However, everyone has to face the fact that the team of technicians and technicians is indeed very scarce, and the entire job market has been distorted!

Then, the sky-high annual salaries of various scarce jobs, through such debates, gradually became well-known to the people of the New Dragon Kingdom, which brought a huge impact on concepts and subtle changes in the future, and vocational and technical education, as the foundation of the national industry, gradually began to prosper.

This may be the biggest gain of this skilled immigration policy!