Reborn in 1982: I Became the Richest Man by Repairing Cars

Chapter 94: Jiang Hui Volunteers, Begins to Let Go

As soon as the driver left, Lin Yuanwu had already set his sights on the BJ130.

Without waiting for Jiang Hui's instructions, he stepped forward and said, "Jiang Hui, let me fix this car."

"I've helped you disassemble carburetors several times before. The BJ130 carburetor isn't anything new, and it's the same as the BJ212. I'm confident I can fix it."

Lin Yuanwu is exceptionally gifted and has an extraordinary ability to learn car repair techniques.

During this time, he really mastered a lot of basic repair skills.

So Jiang Hui laughed when he heard that and nodded in agreement: "Okay, Brother Yuanwu, then I'll leave it to you to take charge."

"I'll have Weimin and Shigui learn from you. As you work on it, explain your ideas to them."

In the future, there will definitely be more than just a few people at [Xiao Jiang's Auto Repair].

Jiang Hui couldn't possibly personally mentor every apprentice.

Lin Yuanwu, as the eldest disciple, must now shoulder the responsibility.

The key is that he has the ability.

Jiang Hui naturally wouldn't be polite.

Don't worry!

Lin Yuanwu rolled up his sleeves and deftly took out a box wrench and a flathead screwdriver from the toolbox.

There was also a small roll of fine sandpaper and a copper oil pan.

These are all standard tools for repairing carburetors.

He placed the tools beside the car and deftly lifted the hood.

Jiang Hui then called Fan Weimin and Li Shigui over.

"Both of you stand closer, watch carefully, and remember this."

"Although Yuanwu has not been learning car repair for very long, his skills have improved very quickly."

"Listen carefully and watch closely as he repairs the car, making sure you don't miss a single step."

"Weimin, observe the techniques and sequence. Shigui, first memorize the parts and the corresponding repair methods for the problems."

"Ask if you don't understand, but don't touch things randomly or interrupt."

Although Lin Yuanwu was to teach while repairing cars, the focus was definitely on repairing cars, with teaching as a secondary task.

Jiang Hui didn't want to force things to grow too fast, lest it delay the car repair or cause it to break down.

That would be a losing proposition.

"Yes, Master!"

The two immediately moved closer to Lin Yuanwu, their eyes fixed on the engine compartment.

Lin Yuanwu lifted the hood and first glanced at the 492Q engine in the engine bay.

He touched the carburetor casing with his finger again, and said without turning his head.

"The customer has already mentioned the problems with this car: oil leaks, unstable idling, and stalling when starting."

"It can be basically determined that the most critical reason is that the triangular needle valve of the BJ130 carburetor cannot seal the oil."

"The carburetor casing is still a little warm because the car was parked not long ago. We have to be extra careful when disassembling it so as not to burn ourselves or spill any gasoline residue from the fuel lines."

As he spoke, he followed the method Jiang Hui had taught him before, doing and explaining at the same time.

Jiang Hui stood to the side, trying to minimize his presence.

"When repairing a carburetor, the first thing to do is to disconnect the power."

"Unplug the distributor wires. See that plug covered in black rubber? Just pull it up and it will come off."

"This is to prevent the gasoline from igniting when the engine is started; this is something that must never be forgotten."

"Also, make sure to turn off the fuel tank switch before disassembling, otherwise gasoline will keep flowing into the carburetor, making a mess everywhere and easily causing a fire."

Lin Yuanwu unplugged the wire, then bent down and peered to the bottom outside of the fuel tank, near the longitudinal beam of the frame, and found the fuel tank switch to turn it off.

This type of fuel tank switch was also standard equipment on vehicles in the 1970s and 80s.

Then he picked up a box wrench and began to disassemble the various connecting pipes of the carburetor.

He aimed at the screw on the oil pipe clamp, turned it twice, and loosened the clamp.

"Be gentle when removing the oil pipe, don't pull it hard, the oil pipe is made of rubber."

"Over time, it becomes brittle and prone to cracking and leaking, which can cause serious problems."

"After loosening the clip, slowly move the oil pipe away, and place a copper basin underneath to catch it."

"Catch the remaining gasoline, don't waste it, you can add it to the repair shop's spare fuel tank later."

This copper basin was recently purchased.

In the past, we would just find any bucket or basin to put it in.

However, iron, aluminum, and enamel basins are prone to sparks when they collide or rub against each other, and can explode at the slightest touch.

Furthermore, copper will not be corroded by gasoline or solvent oil, will not rust or shed residue, and will not contaminate the precision measuring orifice of the carburetor when used to hold solvent oil for cleaning precision parts.

When you're broke, there's nothing you can do but be careful.

Now that I have money, I certainly can't skimp on things like this.

After collecting the remaining gasoline in the copper basin, Lin Yuanwu picked up a flathead screwdriver.

Loosen each of the four fixing screws on the carburetor base.

He kept Jiang Hui's instructions in mind and used just the right amount of force, neither twisting the threads too much nor leaving any scratches.

"The carburetor's mounting screws are made of brass, which is softer than iron screws, so don't tighten them too much."

"Otherwise, if the threads get stripped, the entire carburetor base will have to be replaced, which will delay work and cost money."

"Tighten the four screws one by one, don't unscrew them all at once, otherwise the carburetor will be unevenly stressed and easily become crooked, and it won't fit the holes when you put it back."

Following Jiang Hui's example, he relayed these words of advice to Fan Weimin and Li Shigui.

After removing all four screws, he held the carburetor body with both hands, pressed his thumbs against the edge of the base, and removed it smoothly.

Then place it on the clean cotton cloth laid on the ground.

He didn't put it directly on the ground because he was afraid it would get dirty with mud and soil the delicate parts inside the carburetor.

"Look closely, this is the 231 carburetor. It's used in the BJ130 from Beijing Second Automobile Works and the BJ212 from Beijing Automotive Industry Corporation, and it's also the part most prone to problems."

"It consists of three parts: upper, middle, and lower. The upper cover is equipped with a float and a needle valve."

"The middle body contains the metering orifice and oil passage, while the lower body connects to the throttle body. When disassembling, you must follow the correct order and not disassemble randomly."

"The disassembled parts must be arranged neatly, and you must remember which screw corresponds to which hole."

"Otherwise, things will be a mess when you put it back together. Not only will the problem not be solved, but it might even get worse."

After saying that, Lin Yuanwu picked up a flathead screwdriver and gently pried open the clips on the carburetor cover.

"When you pry open the top cover, go slowly. These clips are made of thin sheet metal and are very brittle. If you break them, the top cover will no longer be able to stay in place."

"Look, once the top cover is lifted, the float, needle valve, and measuring orifice inside are all exposed."

"That silver, spoon-like thing is the float."

"This small brass valve over there is a triangular needle valve, which is also the key valve we are repairing today."

Fan Weimin had seen Jiang Hui repair cars before, so he didn't find it strange.

However, this was the first time Li Shigui had ever seen a carburetor, and he stared wide-eyed, afraid of missing any detail.

However, as a complete newcomer, he really wanted to learn and memorize more things.

Unfortunately, no matter how carefully he looked at something, he would forget it a little while later.

This is a process that newcomers often encounter.

After all, not everyone is as gifted as Lin Yuanwu.

Although Lin Yuanwu was giving instructions, he never looked at Fan Weimin and Li Shigui.

He gently pinched the float with his fingers, pulled it up, and the float rod moved accordingly.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like