At 7:30 the next morning, Lin Yuan pushed open the door to Professor Robert's workshop. The red brick house was still dark, with only the morning light streaming through the high windows casting a blurry patch of light on the ceiling.

He reached out and pressed the switch on the wall. The fluorescent light tube flickered twice and then hummed brightly, illuminating the entire workshop.

Anvil, forging furnace, power hammer, belt sander—every piece of equipment is in its original position from yesterday; he could touch any of the switches with his eyes closed.

He had just placed his backpack on the workbench when the workshop door was pushed open.

Mark walked in with a cup of coffee, followed by a cameraman and a sound engineer. The two of them skillfully set up equipment in a corner of the workshop.

"Good morning." Mark Chonglin raised his coffee cup. "Is today the official start?"

"Let's begin." Lin Yuan walked to the materials shelf and took down a piece of 1084 high-carbon steel plate, which was from the same batch of material used for the sword blank he practiced yesterday.

He placed the steel plate on the worktable, used a belt sander to grind off the oxide layer on the surface, and then repeatedly wiped it clean with acetone solution.

Mark stood at a safe distance with his coffee, assuming today's process would be similar to yesterday's. Then he saw Lin Yuan stop what he was doing, pull out a silver object from somewhere, and place it on the worktable.

It was a silver-white metal plate, about the size of a palm, with uniform thickness and a smooth, flat surface.

Mark put down his coffee cup, not for any other reason than that the silver was so bright under the light—it wasn't just ordinary reflection, but the kind of mirror-like shine that comes from being polished dozens of times.

Of course, it's also possible that the workshop's fluorescent lights just happened to be shining on it.

"Is this silver?" Mark couldn't help but ask. "You're adding silver to the steel billet?"

"Yes." Lin Yuan rubbed the surface of the silver plate with his thumb. The texture was no different from ordinary silver, but the skin on his palm could feel a very slight warmth when it touched the plate.

"Silver's melting point is very different from steel's." Although Mark isn't a swordsmith, he's accumulated a lot of basic forging knowledge from filming several seasons of the show. "Aren't you afraid it'll melt in the furnace?"

"I'm afraid." Lin Yuan flipped the silver plate over and looked at it closely. "That's why we have to control the temperature and not let it melt."

Mark stepped back two paces, returned to the cameraman's side, and asked in a low voice, "Have you filmed the process of forging silver and steel together before?"

The cameraman shook his head, keeping the camera focused on Lin Yuan's hand.

Lin Yuan did not notice their hushed conversation.

He placed the silver plate on the worktable, covered it with a clean cotton cloth, and then picked up the cleaned 1084 steel plate, which gleamed with a bright silver metallic luster under the light.

He silently did the math in his mind. The gold coins issued by the system were standard one-ounce pure gold coins. At the current international gold price, one ounce was worth over four thousand dollars, so ten gold coins would be over forty thousand US dollars. Over forty thousand dollars for a piece of silver—just thinking about it made his insides clench. That's enough to buy a nice car.

But just before he was about to insert the Holy Silver into the steel plate, a new prompt suddenly popped up on the system panel in the corner of his vision.

[Side quest triggered: First Attempt at Enchantment]

[Quest Objective: Independently complete the forging of an enchanted weapon (0/1)]

[Task Description: Infuse materials with special properties into ordinary iron to create enchanted weapons that transcend the scope of conventional forging. Completing this task will mark your official entry into the realm of enchanted forging.]

[Quest Rewards: 50 Gold, 1 Random Enchantment Material Pack, 1 Collection of Standard Weapon Blueprints]

He stared at the words for a few seconds. Fifty gold coins—enough to buy five Blessed Silver, or five hundred Stingray Skins. Also included were enchanting material packs and weapon blueprint collections.

The gold coin reward alone would be enough for him to double the cost of the materials, not to mention that the blueprint collection would likely contain more forging designs of the same caliber as the Paladin Cross Sword.

If it's completed, this sword will be the key to entering a new field. The sword itself is also a finalist entry, achieving two goals at once.

If he fails, he has a spare sword blank to take his place, so it won't affect the match.

He could just spend another ten gold coins to buy materials; he wasn't without the cost of trial and error.

Lin Yuan lifted the cotton cloth, placed the silver plate flat in the center of a 1084 steel plate, and then covered it with another steel plate that had been cleaned in the same way.

A piece of silver material is sandwiched between two high-carbon steel plates. A uniform gap is left around the silver plate and between the edges of the steel plates to prevent the high-temperature electric arc from hitting the silver material directly during spot welding.

He used a spot welder to evenly weld several points along the edge, fixing the sandwich structure into a whole. He also welded an operating handle to the tail end of the billet, with the same length and angle as the one he used for practicing on the sword blank yesterday.

He walked to the furnace, opened the air vent, and lit the fire.

The blower hummed, and flames shot up, turning from red to orange.

Lin Yuan stood in front of the furnace without starting immediately, but stared at the flames inside for a long time.

The melting point of the silver material is the standard melting point of pure silver, approximately 960 degrees Celsius, as indicated in the system.

The forging temperature range of 1084 high-carbon steel is above 1,000 degrees Celsius.

He couldn't just heat the steel billet to a bright orange color and take it out like he did yesterday when making practice sword blanks. Instead, he had to take the billet out of the furnace when it reached the critical point of turning from cherry red to bright orange, and complete the first round of forging while the silver was still solid but close to softening, so that the silver would be engaged by the forging and welding surfaces of the steel billet in a solid state.

Once the silver and steel have initially bonded, the subsequent heating temperature can be increased slightly.

This is the solution he came up with after repeatedly calculating several sets of data on his laptop last night.

The steel billet slowly heated up in the furnace. He activated the pyrometallurgical process, his senses spreading along the temperature field of the flames to accurately read the temperature distribution in every inch of the furnace.

Cherry red is transitioning to bright orange.

The silver plate is positioned in the middle of the steel plate, and heat needs to be conducted from the steel plates on both sides to the middle layer, so the actual temperature of the silver is slightly lower than the surface of the steel plate—this is a buffer window that it can utilize.

He waited a few seconds to allow the silver to catch up in temperature, then reassessed the temperature of the silver layer using a double-fired forging process. It was close to the melting point, but not quite there yet.

Right now.

He used pliers to remove the steel billet and strode towards the anvil. The power hammer's anvil was right next to him—he glanced at it but didn't go over.

The power hammer is too strong; the force of the hammer's impact is preset and cannot be fine-tuned based on the feedback from the silver layer at the moment of contact with the steel billet. He couldn't afford to take that risk.

He placed the steel billet on the anvil, his right hand gripping the wooden handle of the apprentice's forging hammer. The dragon head emblem on the hammerhead gleamed dimly in the furnace fire.

By using a multi-stage forging process, he can activate the flame at the moment of hammering, allowing the two dissimilar metals to penetrate and fuse with each other at high temperatures. This precise control can only be achieved with a hand hammer—a power hammer simply strikes and doesn't adjust its force based on the feedback from the silver layer.

The first hammer fell. His stomach tightened.

The forging hammer strikes the very center of the sandwich structure, and the sensation of the superheated forging spreads along the contact surface of the hammer strike, while simultaneously drawing the activity of the flame to the bonding surface under the hammer.

He could clearly perceive the real-time feedback of the silver layer inside the steel billet—the thickness was getting thinner, extending evenly from the center to both sides, with no signs of tearing at the edges.

The temperature and the force are just right.

No silver liquid was squeezed out from the edge of the steel plate. He adjusted the position of the billet, the second hammer blow landing on the root of the blade, and the third hammer blow landing on the tip of the blade.

For the next twenty minutes, he repeatedly heated, forged, flipped, reheated, and forged the iron at the anvil. Before each hammer blow, he mentally estimated the landing point and force, and after each blow, the heat treatment process provided feedback on the changes in the silver layer.

The silver material was pressed evenly into a thin layer between the steel plates, not flowing and spreading after melting, but rather undergoing plastic extension due to hammering deformation in a solid state.

After finishing the first round of hand forging, he used tongs to pick up the steel billet and flipped it under the light. Visually, it was no different from other ordinary steel billets—no silver seepage, no cracks, and no unusual color changes.

He used his internal vision to penetrate deep into the steel billet, and found that the silver had changed from an initial independent interlayer to a silver phase layer embedded in the steel matrix.

But the fusion had only just begun—the interface between the silver and the steel was still clear, and the annealing process needed to continue. He sent the billet back to the furnace for reheating.

Lin Yuan couldn't remember how many rounds he had gone through. He only remembered that each round of heating required precise temperature control below the melting point of silver, and each round of forging required using stacked forging to activate the flame, allowing the silver and steel to gradually penetrate and fuse under the combined action of high temperature and pressure.

The core area of ​​the silver phase is gradually shrinking, and its thickness and shape are changing with each iteration. It is no longer a separate piece of material, but is gradually incorporated into every gap of the steel matrix.

The forging process, combined with the rhythm of hammering, presses the silver material layer by layer into the steel, completely integrating them into one.

Several times he could feel the silver layer clustering in certain areas—he would immediately adjust the point of the next hammer blow, hitting the clustered area a couple more times to make the silver phase spread out again.

Another time, the temperature was slightly too high, and there were signs of melting at the edge of the silver phase. He immediately took the billet out of the furnace and pre-cooled it in the air, waiting for the temperature to drop back to a safe range before continuing.

At noon, he put down the forging hammer.

The unfinished sword lay quietly on the anvil. He stepped back and performed a thorough examination using his internal vision.

The silver has been completely incorporated into the steel billet.

It's not sandwiched in the middle, not embedded in the base; it's completely fused together—the entire sword blank is made of the same material, inside and out.

It's not two steel plates sandwiched with a layer of silver; it's a new material where silver and steel are repeatedly forged and tempered to form an inseparable whole.

Lin Yuan let out a long breath and wiped the sweat from his forehead with his sleeve.

Throughout the morning, every round of heating, every hammer blow, and every traction of the stacked forging process required complete concentration.

The physical exertion wasn't great, but the mental exertion was several times that of yesterday.

Mark stood in the corner with his coffee cup for the entire morning.

He changed his coffee twice in between—the first cup went cold after he finished watching Lin Yuan's first round of hand forging, and the second cup lost its temperature at a point when he was so engrossed in watching that he forgot to drink it.

Holding his third cup, he watched as Lin Yuan finally put down the forging hammer before asking the cameraman, "Did he use the hand hammer for longer today than he did the previous two days combined?"

The cameraman rubbed his shoulder, the lens never leaving the anvil: "I've changed two batteries."

Mark walked towards Lin Yuan, his gaze still lingering in the direction of the annealing furnace: "How did it go this morning?"

"The silver has completely fused with the steel billet." Lin Yuan placed the sword blank into the annealing furnace, set the program to let it cool down slowly, then walked to the tool wall, picked up his thermos and took a few sips of water. "The morning's task is complete. This afternoon, we'll start shaping the sword."

"What do you mean by 'complete fusion'?" Mark pressed. "Didn't you already insert the silver clip in the first place?"

"Squeezing it in is just putting silver inside steel. Fusion is making the silver become part of the steel." Lin Yuan thought for a moment, "It's like kneading dough—kneading oil into the dough, kneading it thoroughly, the oil is no longer oil, and the dough is no longer the same dough."

You can't tell which is oil and which is flour because they're the same thing.

Mark was silent for a moment, seemingly understanding but not quite, then asked, "That piece of silver must have cost a lot of money."

Lin Yuan did not answer directly. He just stared at the fused holy silver steel billet and smiled, "Only good materials can forge truly good works."

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like