Rebirth is fine, but I get eight hundred dollars right from the start?

Boss Xu took the lead.

The three of them went out through the side door of the office building and walked about fifty meters along a covered corridor to reach the factory.

The walls on both sides of the corridor are covered with various safety slogans, such as "Safety First, Quality Foremost" and "Anti-static, Dustproof, Moisture-proof" in large red letters. There are also several fire extinguishers and fire hydrant boxes in the corners.

"Please change out of your work clothes!"

At the end of the corridor is a small room where the workers change their clothes.

Mr. Xu reached out, and the staff in the room handed out several sets of white suits that had been prepared in advance.

"Do you need any help?"

"It's okay, I can do it myself."

Lin Shu was quick and agile; despite it being his first time wearing it, he got ahead of the other two.

"Tsk tsk, youth is wonderful."

Mr. Xu was somewhat envious, "Mr. Lin, you sit in front of the computer every day, yet your figure is still top-notch."

"Talent, talent, a gift from God."

Joking around, Boss Xu finally finished dressing, and even helped the overweight Old Tang pull up his zipper.

"Hey Tang Laopao, you've only been with HWG for a short time, and you've already gotten quite a belly."

"The meat really doesn't get fattened up after being exposed to wind and sun."

"Get out of here, just take the lead."

"Haha, you're getting anxious, you're getting anxious."

As Boss Xu smiled, he pushed open the door to the workshop, and Lin Shu instantly felt a noticeable temperature difference.

The temperature in the workshop was controlled at around 24 or 25 degrees Celsius, which was much cooler than he had imagined. There was also a faint smell of electronic components in the air, mixed with the smell of solder paste and anti-static cleaner. It wasn't exactly pleasant, but it wasn't unpleasant either. After smelling it for a while, he actually felt a sense of reality that "this is a proper place for production."

"first?"

"Yes, to be honest, Mr. Xu, this is truly my first time visiting a digital product production line in person."

Xu Lang took the lead and stepped forward, "Alright, today we'll have to give you a proper explanation."

"This is a high-precision parts production workshop, so the requirements are quite high."

"In the workshop where we are now, the floor is covered with anti-static epoxy flooring."

Lin Shu nodded. Antistatic epoxy flooring is quite expensive, costing anywhere from eighty to several hundred yuan per square meter. Clearly, the fact that Boss Xu brought it out specifically indicates that the flooring underfoot is high-end.

The shoes have a slight springy feel when you step on them, and there's a slight "squeaking" sound when the soles touch the ground.

The ceiling is covered with arrays of white fluorescent tubes, and several large industrial air conditioning vents are suspended from the ceiling, continuously delivering filtered cold air.

That makes sense. In the production of electronic products, sweat is a major taboo. Even with work clothes separating the workers, their working environment must be guaranteed.

Further on, the workshop was divided into three main areas, with clear dividing lines drawn on the ground using yellow tape, and blue area signs with white lettering hanging above the lines.

"Our injection molding workshop is on the inside. You two can see what's going on inside through this tempered glass wall."

As Xu Lang spoke, he gestured for Lin Shu and Tang Bin to move closer.

Inside the workshop, six injection molding machines were lined up in a row. The main body of the machines was a large, grayish-green iron lump that looked bulky but operated quite smoothly.

Next to each machine is an automatic feeder and a manually operated robotic arm. Plastic granules go into the hopper, melt at high temperature, and are injected into the mold. They are formed in a few seconds. The robotic arm reaches down to pick out the still slightly hot outer shell and place it on the conveyor belt. The whole process can be said to be very close to fully automatic... well, if you don't look at the few workers in blue anti-static clothing doing visual inspection and packing at the end.

Mr. Xu pointed to the injection molding workshop and said, "There are six injection molding machines over there, all from Chen Hsong. They are new models that were just replaced last year, ranging from 150 tons to 250 tons. We can start making keyboard shells, mouse covers, and the like right here after the molds are made. The daily production capacity is more than 20,000 sets of raw parts. After polishing and painting, they are sent to the assembly line."

"In short, Mr. Lin, however many you can sell, I can produce just as many for you."

More than 20,000 sets of unfinished products per day?

Lin Shu's lips twitched slightly. This guy was probably aiming to monopolize the peripheral market for university students across the country.

Well, it's not entirely impossible...!

The middle area is the SMT assembly workshop, where the environmental standards are significantly stricter than those in the injection molding area. There is a sign at the entrance that reads, "Please wear anti-static clothing, anti-static wristbands, and change into anti-static slippers before entering."

"Let's go, we're fully equipped, we can go in, but try not to touch any running equipment."

Lin Shu stood at the workshop entrance.

Through the glass, you can see about a dozen pick-and-place machines operating simultaneously. The feeder continuously feeds the components from the reel one by one to the nozzle, and the placement head moves back and forth on the circuit board at a speed that is almost impossible to keep up with the naked eye, swishing and swishing as it places the resistor and capacitor chips onto the pads.

Several reflow ovens nearby were emitting a slight amount of heat, and workers were using magnifying glasses to perform first-piece inspections at the oven outlets.

Tang Bin, who was lagging behind, glanced at his old buddy with a complicated expression.

To be honest, I have this feeling that I've come here today to watch you show off.

"Hehe, you managed to spot that?"

Xu Lang laughed heartily, "Oh my, you finally asked! I've been holding back for so long! How's it going, brother? Your empire has expanded quite a bit these past few years, hasn't it?"

As the saying goes, "To return home in wealth and honor is like wearing fine clothes at night."

Over the years, his business has grown several times over, so naturally he wanted to show off to his brothers.

"It's really good. I was worried that you wouldn't be able to sustain it by doing OEM manufacturing, so I specially brought in a new client to cooperate with you."

"Hey, let's not talk like that, brothers. OEM manufacturing is one thing, and branded peripherals is another. Today, you brought General Manager Lin here, and I'm putting all this out in the open to repay your kindness and put your minds at ease."

Just as the other party said.

Even if the two of them didn't understand the specific technical parameters, just by looking at the precise and orderly assembly line operation, they had a good idea of ​​what was going on. With this level of equipment configuration and quality control process, the PCB boards produced would definitely be of high quality and would not have the common problem of cheap domestic keyboards and mice "breaking down after two months of use".

Lin Shu did not speak, or rather, he remained silent.

Oh no, did I accidentally open it?

Since my rebirth, apart from the first week when I suffered a bit from working as a gamer at an internet cafe, everything I do has been successful, and whatever I do, someone will come to my aid.

I just want to make some money by selling e-sports peripherals and gaining more fans, so you just set up a high-quality original manufacturing factory for me.

Is he being reasonable?