We workers have power! From small workshops to arms dealers

Chapter 78 Mountain bikes plus drones, is there any potential?

Lin Tian's gaze was resolute as he slowly said, "Time can be made!"

"What we are going to build is a first-generation lightweight civilian drone with a simplified structure and mature technology. Relying on our factory's military processing foundation, two months is more than enough time for research and development, prototyping, test flights, and finalization. It is not difficult at all."

Looking at Lin Tian's confident and assured appearance.

The anxiety in everyone's hearts was suppressed, knowing that the factory director never made empty promises or fought battles he was not sure of winning.

Since Lin Tian had made up his mind, no one objected and they all nodded in agreement.

"If no one has any further questions, then the meeting is adjourned. Everyone, please return to your posts and be ready to respond at any time!"

"Yes, Factory Manager!"

The crowd gradually got up and left, returning to their respective posts.

Lin Tian returned to his office and immediately began designing and developing the drone.

He pulled over the drawing board, laid out the professional engineering drawing paper, picked up the drawing instruments, and began to write with flowing strokes.

With advanced design experience and a precise understanding of first-generation drones, the outline of the fuselage, component structure, and assembly dimensions were quickly sketched out.

For three whole hours, Lin Tian remained focused and never stopped, meticulously marking every parameter and every structure with each stroke.

A complete set of blueprints for a multi-module lightweight civilian drone, adapted to current industrial standards and ready for mass production, has been drawn up.

This drone was specially designed for this exhibition, taking into account practicality, innovation, and visual appeal.

All core parameters are in line with current technological levels and are suitable for civilian use in multiple scenarios.

The entire aircraft uses a lightweight aviation aluminum alloy fuselage, which is lightweight, high-strength, and has good wind resistance.

Weighing only 28 kilograms empty and 45 kilograms fully loaded, it is portable, easy to operate, and suitable for low-altitude, low-speed civilian operations.

It is powered by a single-cylinder two-stroke small gasoline engine with a rated horsepower of 12.5 hp, which is stable in power, has a low failure rate, and controllable fuel consumption.

It is adapted to the power requirements of light aircraft and is currently the most mature small aircraft power configuration.

With a maximum flight altitude of 1,200 meters and a safe operating altitude of 200 to 800 meters, it perfectly covers the needs of civilian exploration, inspection, and aerial photography.

With a single full tank of fuel, it can fly for 90 minutes and has a maximum flight radius of 30 kilometers, which is sufficient to meet the needs of various civilian scenarios such as suburban exploration, factory inspection, and disaster investigation.

With a cruising speed of 55 kilometers per hour, the flight is stable, the control is precise, the fault tolerance is high, and it is very easy to learn.

The whole machine adopts a modular assembly design, with four core basic modules that can be freely switched to adapt to diverse scenarios.

Basic flight module, high-definition aerial photography and observation module, light material transportation module, and emergency rescue and delivery module.

The basic modules meet the requirements for routine flight and low-altitude inspection.

The aerial photography module is equipped with high-definition observation equipment, enabling high-altitude topographic mapping, factory area inspection, and disaster recording.

The transport module can carry 15 kilograms of light supplies for delivery of supplies and equipment to remote areas.

The rescue module can deploy first aid medicines, ropes, and rescue supplies, making it suitable for scenarios such as mountain rescue and flood emergency response.

In addition, the aircraft is equipped with a radio remote control system, a simple attitude balancer, a point-locking device, and is equipped with the first-generation simple guidance technology.

It can be manually controlled, hovered at a fixed point, and cruised along a flight path. In the domestic civilian industrial field, it is an absolutely groundbreaking and innovative product.

Lin Tian put down his drawing pen, carefully checked the dimensions, parameters, and structure of the drawings, and after confirming that there were no errors and that it was fully ready for production, he breathed a long sigh of relief: "The design of the first-generation multi-functional civilian drone is finally complete!"

Hongxing Machinery Factory can independently process and produce the drone's fuselage frame, hardware accessories, structural parts, and control circuits.

However, high-precision aviation motors and silent dedicated propellers cannot be mass-produced independently for the time being due to limitations in the precision of existing equipment in the factory.

These two types of core components have extremely high precision requirements, special materials, and stringent processes, which ordinary machinery factories simply cannot meet, and are currently the only obstacle to their research and development.

Lin Tian pondered for a moment, then his eyes lit up: "Hey, I've got it!"

He immediately picked up the office phone and dialed the public contact number of the newly established Hangzhou Industrial Chamber of Commerce.

The objective was clear: to inquire whether any manufacturers within the chamber of commerce possessed the technology and production capacity to manufacture high-precision aviation motors and silent propellers.

The accessories must be compatible with lightweight drones, their parameters must match the drawings and standards, and they must be available for expedited delivery.

Upon receiving the call, the chamber of commerce's dedicated liaison officer immediately matched the production capacity and technology records of each member company and provided an accurate response within just five minutes.

"Director Lin, the match was successful! The Hangzhou Precision Electromechanical Factory and the model aircraft parts manufacturer, who have joined the association, are fully capable of meeting the production standards!"

"The Precision Electromechanical Plant has high-precision machine tools that can process low-power, highly stable aviation motors suitable for lightweight UAVs, with smooth start-stop, low power loss, and extremely low failure rate."

"Our model aircraft parts factory has been deeply involved in the production of precision aviation parts for many years and can customize high-strength, quiet nylon propellers."

"Low wind resistance, stable rotation speed, and wear resistance—perfect for your drone's design parameters. Both companies can expedite production, delivering a complete set of accessories within a week!"

Upon hearing the result, Lin Tian instantly smiled with relief, and the problem in his heart was solved.

"That solved the problem smoothly!"

At this moment, Lin Tian truly felt the core value of the Hangzhou Chamber of Commerce, which completely confirmed the significance of developing together.

The companies complement each other's resources, share technologies, and share production capacity; the shortcomings of one company can be made up for by the advantages of another.

This broke the previous deadlock where each factory struggled alone and had no solution when faced with difficulties, and the empowering role of the Chamber of Commerce was fully demonstrated.

The core motor and propeller have been successfully integrated into the supply chain, and the remaining components, including the aluminum alloy frame, mounting bracket, circuit base, control shell, and connecting hardware, number in the hundreds.

All of these processes can be independently handled by Hongxing Machinery Factory, including mold making, processing, prototyping, and precision machining.

With complete accessories, comprehensive drawings, implemented parameters, and controllable technology, the remaining tasks are simply to complete component production, standardized precision calibration, overall assembly and debugging, and flight testing optimization.

This groundbreaking multi-functional civilian drone is ready to be officially launched and showcased at the trade fair!

Afterwards, Lin Tian immediately organized the complete set of detailed component drawings, got up and walked out of the office, called over Zhao Tianming, the production workshop director, and solemnly handed the drawings to him.

"Old Zhao, these are the blueprints for all the components of the drone except for the core motor and propeller. I have clearly marked the parameters, processes, and precision requirements."

"You immediately coordinate the workshop production line, prioritizing production and expediting sample production."

Zhao Tianming took the blueprints, quickly glanced at them, and then said, "Don't worry, Factory Manager!"

"Leave this to me!"

Lin Tian then briefly explained to him the core technological requirements of the first-generation simplified guidance, attitude balance, and remote control adaptation, and gave him instructions on key precautions during production.

"Understood, Factory Manager!" Zhao Tianming remembered the key points, carefully put the blueprints in his pocket, and hurriedly went to the workshop to coordinate production matters.

As soon as Zhao Tianming left, a series of hurried and excited footsteps came from outside the office door.

Technical backbone members Chen Feng, Li Zhiqiang, and Wu Jianming rushed in through the door.

Their faces were filled with excitement and eagerness as they looked directly at Lin Tian and said in unison, "Factory Manager! Our products also want to participate in the trade fair!"

"Products? What products?"

"Mountain bike..."

……

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like