I asked you to refurbish it, and you turned a scrap car into a supercar?
Chapter 2 Status Tracking: From Ragged to Top-Tier!
With a snap, Lu Weiyi broke off the hard shell completely.
The Leica cameras were all exposed to him, and they were in a rather sorry state.
Layers of yellowish-brown mud mixed with sticky engine oil covered it.
The shutter button and ISO adjustment button on the top of the camera body are completely stuck.
The exterior of the device is covered with a layer of black lychee-patterned leather.
However, it is now filled with various unknown pollutants, which is somewhat disgusting to look at.
As for the connection between the lens and the camera body, you can even clearly see some dried algae remains.
Clearly, this machine is a water-soaking machine, and it has been soaking for a very long time.
"What a waste!" Lu Wei exclaimed.
He couldn't understand why anyone would have nothing better to do than throw such a valuable thing into the cement of a building.
However, none of these are serious matters.
This thing is now in his possession.
Wiping the dust off his hands, Lu Wei was about to disassemble it.
Just then, the blue panel in the lower right corner of the screen reappeared.
[Optimal Cleaning Path, Step Two: Dissolving and Sterilizing]
[Heavy oil and silicone grease residue was detected on the exterior of the device, and a large number of anaerobic bacteria were growing deep in the crevices of the buttons. It is recommended to use a rust remover and lubricant with high-concentration ethanol for targeted dissolution treatment.]
Looking at this professional description, Lu Wei couldn't help but raise an eyebrow.
"So, that's what you call professionalism."
He happened to have both of those things.
He turned around and rummaged through the drawer for a moment.
He pulled out a bottle of WD40 rust remover, along with a bottle of medical alcohol he had bought at the pharmacy earlier.
Pick up the WD40 and precisely aim the nozzle at the slit on top of the camera.
The solvent gushed out the moment it was pressed.
Quickly and completely cover the areas where the gaps are blocked.
Lu Wei quickly covered his mouth and nose, and used his other hand to find a pointed pin header from the toolbox.
This is the tool he usually uses to clean the dust from his phone's earpiece; it's perfect for removing grease and grime now.
Before long, the originally solidified and blackened oil stains gradually dissolved into a pool of turbid liquid.
Dirty water slowly flowed down the edge of the metal body.
He immediately picked up several cotton swabs and began to clean the area meticulously, bit by bit.
His hand movements were incredibly fast.
Having repaired so many discarded electronic products for so long, his hands had long since become incredibly steady and stable.
He even felt that he should have filled in clinical medicine when he applied for college.
After a short while, the external buttons were able to move smoothly again after being cleaned.
Hold the camera body and lens with both hands, press the lens release button firmly with your thumbs, and rotate it sharply to the left.
Due to the long-term accumulation of dirt, the resistance was extremely high, and it was impossible to turn it this time.
"Oh, I'm going."
"It's stuck pretty tightly."
Lu Wei took a deep breath and slightly adjusted the way he used his wrist, instantly tensing his arm muscles.
A series of dry, rattling sounds emanated from the metal jaws.
Soon, the expensive lens with the red markings was finally detached from the camera body.
Of course, this lens is no longer priced that way.
Lu Wei held the removed camera up to the lamp and examined it carefully.
Looking at the camera, the situation was much worse than I had initially thought.
The lens was covered with a dense layer of white spots from dried water stains.
This is undoubtedly the fatal flaw of the optical lens.
Lu Wei picked up the dropper on the table, drew up a small amount of alcohol, and dripped it onto the white spots.
Then use a lint-free cloth to wipe the lens surface in a very gentle circular motion.
A few seconds later, the white mold spots on the lens were wiped away little by little.
However, some minor corrosion marks inevitably remained on the lens surface.
The anti-reflective coating that was originally purplish-red on the lens now has visible defects and gaps.
"Tsk."
Lu Wei frowned, but his hands continued moving.
The panel indicates that the cleaning process is not yet complete.
That means there's still hope!
Lu Wei continued to follow the instructions, proceeding step by step.
After he cleaned the lens and the surface of the camera body, he finished cleaning them.
Lines of small text appeared again on the panel.
[Optimal Cleaning Path, Step 3: Motherboard Deoxidation]
Water ingress into the chassis caused extensive oxidation on the core logic board, with severe copper oxide buildup on some capacitor leads, requiring deep deoxidation treatment.
Lu Wei raised an eyebrow; this was the real step that would determine the fate of the machine.
No matter how clean the outer casing is, if the core motherboard is burned out and cannot be repaired.
That camera can only be sold as a used part to secondhand dealers at best.
Or you can simply use it as a decorative item.
However, disassembled parts or decorative items would never sell for 45,000 yuan.
Lu Wei took a deep breath.
The father in the intensive care unit is still desperately waiting for the money to save his life; he simply cannot afford to lose it now.
I stopped thinking about it and cleared my mind of all distractions.
Lu Wei decisively switched to a Phillips screwdriver and began disassembling the camera's base plate and the rear screen assembly.
However, the internal structure of this camera is far more complex than that of a regular smartphone.
Multiple delicate ribbon cables are densely interwoven together.
If you tremble even slightly or use too much force, even just breaking a single strand, the machine will be completely ruined.
He picked up a pair of anti-static tweezers and carefully pried open the fragile ribbon cable clips, then gently removed the metal shielding covering the surface.
The internal waterproofing of this machine is actually quite good.
Most of the water vapor and mud are blocked by the machine body's sealing ring.
However, a small amount of moisture still seeped in through the gaps between the buttons.
A palm-sized green precision circuit board appeared perfectly before Lu Wei's eyes.
Moisture caused a short circuit, leaving several charred spots on the motherboard.
The surface-mount capacitors responsible for the power management module are now surrounded by copper oxide rust.
The transmission path of the tiny current has been completely blocked by these copper rusts.
Lu Wei got a bucket of cleaning solution and put the disassembled core motherboards into a small tray.
The highly volatile board cleaning solution reacts immediately upon contact with the verdigris on the motherboard.
Tiny bubbles begin to form densely on the oxide surface and continuously burst.
With repeated rubbing and cleaning, the stubborn copper rust turned into powder and dissolved in the cleaning solution.
Soon, the metal solder joints on the motherboard slowly returned to their original silver-gray luster.
A few minutes later, Lu Wei took out a can of compressed air dust remover and sprayed it violently onto the motherboard surface.
A series of strong, high-pressure airflows blew away all the remaining washing water.
The dirt and oxides on the motherboard were now completely cleaned.
However, the physical damage is still a problem.
It will be quite difficult to fix.
They either get alternatives or sell them as salvaged parts.
The capacitors, now blackened, were covered in cracks, and the broken metal layers inside were visible to the naked eye.
Several tiny copper traces on the motherboard also suffered irreversible breakage due to the high temperature generated by the short circuit.
"No, is this really something my small workshop can fix?"
Even though Lu Wei usually knows some basic electronic circuit knowledge, he was still somewhat helpless when faced with such a sophisticated microelectronic motherboard.
Just as he was considering whether to go to Huaqiangbei to find a used motherboard to replace it.
[Current overall dirt level of the item: 0%]
The cleaning goal has been achieved; all external and hidden stains have been completely removed.
[The host has completed its first high-difficulty cleanup task.]
[Triggering the ultimate reward for Lv1 privileges: State rollback!]
Before Lu Wei could react...
A phenomenon that completely defies the laws of physics occurred at the workbench.
A layer of pale blue light appeared out of thin air, enveloping all the disassembled body parts, lenses, and the damaged motherboard.
Lu Wei was startled by this sudden scene and subconsciously took a step back.
Breathing almost stopped at this moment.
On the cracked and charred surface-mount capacitor, the carbides actually detached on their own.
The physical reconstruction at the microscopic level is proceeding at an exaggerated speed visible to the naked eye.
The damaged ceramic casing is also rapidly and perfectly healing.
The broken copper foil traces, as if brought to life, reconnected.
Silver solder tightly wrapped around each metal pin.
On the surface of the front lens, the areas that lacked anti-reflective coating due to mold corrosion quickly developed a faint purplish-red glow.
The lenses, which had become cloudy due to the water bubbles, have now become crystal clear again.
The next change was to the metal casing of the fuselage.
A dent or scratch on the edge of the base plate is being rearranged and reorganized.
The brass chassis gradually returned to its original state.
The black paint that had chipped off the surface seemed to regenerate as if time had reversed.
The entire amazing process lasted less than ten seconds.
After the pale blue light disappeared, all the parts became brand new and shiny.
There wasn't a single trace of water damage or damage; not even the tiniest speck of dust could be found on the machine.
It looks brand new.
Lu Wei stood there, stunned, for several seconds.
After a long while, he slowly let out a long breath.
At the same time, they accepted this unscientific scene.
After all, he didn't have the energy to delve into the scientific principles behind it.
For a poor student who urgently needs 20,000 yuan to save his elderly father's life, the best way in the world is to turn inanimate objects into cash.
Lu Wei sat back down in his chair and began the final assembly work.
Having gained experience from the disassembly, reassembling it now is a breeze.
He carefully inserted each thin ribbon cable into the motherboard slot.
The metal shielding cover has been installed in place.
The base plate and screen assembly fit together perfectly, and the screws on the outside are all tightened.
"Completed!"
Lu Wei picked up the lens, aligned the red dot on it with the mount on the camera body, and rotated it clockwise into place.
With a crisp click, the revitalized lens was firmly fixed to the camera body.
The camera's rear screen flickered, and a bright red Leica logo slowly appeared in the center of the screen.
The screen then quickly switched to the viewfinder's live view interface.
Lu Wei pointed the camera at the bottle of WD40 on the table and pressed the shutter.
The shutter assembly produced a crisp, clean mechanical click, very smooth.
Soon, an incredibly clear, high-quality photo appeared in the lower left corner of the screen.
This top-of-the-line rangefinder camera has finally been perfectly revived.
Lu Wei breathed a sigh of relief.
Unable to hold back, Lu Wei sat there and burst out laughing.
Because he knew there was hope.
Taking out his phone, Lu Wei found a familiar number and dialed it.
"Old Li, I have a nearly new M10 with a 35mm prime lens. Get the money ready, I'll be at your shop in ten minutes."
"Junk? You'll see when you get there."
You'll Also Like
-
Star Fleet, Starting with Datafication
Chapter 325 2 hours ago -
Naruto: Traveling Through Time Starting with Seizing the Dragon Vein
Chapter 265 2 hours ago -
One Piece: Blue Scale Admiral
Chapter 941 2 hours ago -
Why bother with dating when you already have a cat?
Chapter 252 2 hours ago -
Tokusatsu: How come this knight drama is different?!
Chapter 735 2 hours ago -
Gundam: From Piece to Player
Chapter 287 2 hours ago -
Primordial Era: Starting with the Immortals of the Jie Sect to Prove the Dao of Hunyuan
Chapter 133 2 hours ago -
After mastering the resurrection technique, they begged me to extend their lives.
Chapter 104 2 hours ago -
Lawyer: Start with legal retaliation against infidelity!
Chapter 352 2 hours ago -
Fanatics of the Magic Academy
Chapter 133 2 hours ago