I asked you to refurbish it, and you turned a scrap car into a supercar?
Chapter 24 Violent Flying Lines!
Early the next morning, at the South Suburb Machinery Factory.
Lu Wei pushed open the metal gate.
Lu Wei walked to the workbench and took out a pair of fine-nose pliers with an anti-static coating from the toolbox.
"Enable secondary auxiliary parsing".
As he silently chanted, a blue light screen rapidly expanded in the lower right corner of Lu Wei's retina, and a three-dimensional structural diagram of the machine tool floated directly in front of his field of vision.
The machine tool's originally sophisticated control board had long since been reduced to a charred resin board in the fire, leaving only a few broken terminals standing there forlornly.
In the eyes of any original equipment manufacturer (OEM) engineer, this behemoth would be sent straight to the scrap yard for remanufacturing.
Next, Lu Wei plans to undergo a brutal heart bypass surgery.
He picked up a piece of refined aviation gold wire and looked at it in the light.
The gold wire has a slightly dull luster, and its insufficient purity results in a significant reduction in conductivity. Forcibly connecting it to the original manufacturer's precision microcircuit will definitely cause a short circuit and burn the board.
He used needle-nose pliers to clamp the end of a gold wire, and with his other hand holding a soldering iron, he brought it close to the external power supply terminal of the servo motor.
The high temperature of the soldering iron tip melted the inferior solder paste, and a drop of silver solder firmly connected the gold wire to the copper sheet.
"OK"
Lu Wei muttered to himself, his eyes fixed on the blue current path provided by the secondary auxiliary vision.
He dragged the gold wire around the completely melted control chip in the center of the motherboard and pulled it to the signal receiving pin on the other side.
The soldering iron was lit again, and a plume of white smoke carrying the scent of pine rose up.
……
A week later, Lu Wei looked at his masterpiece and finally smiled.
One after another, rough wires were forcibly connected in front of them.
The slender gold wires, like a tangled spider web, hang across the charred motherboard, forming a visually striking cross-board flying wire diagram.
To outsiders, this seemed like an impossible task.
But with the help of the system, the impossible became possible.
After finishing the communication bridging, he bent down to inspect the hydraulic transmission system at the bottom of the machine tool.
The original high-pressure resistant metal bellows had long since melted into scrap metal, and the hydraulic pump's interface was also severely deformed.
Lu Wei turned and walked to the corner of the factory, where he rummaged through the pile of waste and found several rough black rubber pipes used for pumping water.
He cut off a suitable section with a utility knife, slipped it onto the rusty metal clamp, and forced it into the deformed hydraulic pump interface with brute force. Then he picked up a large adjustable wrench and tightened the clamp with force.
Lu Wei wrapped the white Teflon tape around the joint more than a dozen times until the gap was completely sealed.
Once the internal piping was fixed, the sheet metal repair of the outer casing became much simpler and more straightforward.
The shell, twisted and dented by the high temperature, is beyond repair. If it is not wrapped, the internal cutting fluid will splash out and directly cause a secondary short circuit.
Lu Wei pulled out several pieces of dismantled aircraft skin from under the woven bag.
These aluminum alloy leather pieces bear chipped airline logos and have jagged edges.
He found a piece of iron to place underneath, and then swung the ten-pound sledgehammer down on the bent skin.
The dull thud of metal clashing echoed through the empty factory, sparks flying outwards with each swing of the hammer.
After dozens of heavy blows, the thick aluminum alloy sheet was forcibly flattened, with several tears along the edges.
He put on a flip-top black glass welding mask, held welding pliers in his hand, and the blinding arc light flickered continuously in the dimly lit factory.
He roughly welded several pieces of scrap iron of different styles onto the charred frame of the machine tool, leaving behind ugly black weld scars that looked like twisted centipedes at the weld seams.
After four hours of intense physical and mental labor, Lu Wei's old T-shirt was completely soaked with sweat, and beads of sweat dripped down his nose.
He threw down his welding mask, took two steps back, and examined his masterpiece.
The outer shell of this thing is pieced together from a jumble of aircraft skin, and its surface is covered with black weld marks.
Rough black rubber tubing hangs on the outside of the machine, and a tangled mess of wires floats on the control board.
This is a battle-damaged Frankenstein's monster, full of twisted metal and external pipes, so ugly it looks like a defective product cobbled together in Frankenstein's lab.
"It looks a bit rough, but as long as it can turn, it's a good cat."
Lu Wei pulled the towel from his neck to wipe his sweat, then walked to the worktable next to him to prepare for a trial cut.
He picked up a piece of aerospace-grade titanium alloy blank that had been brought back with him yesterday and fixed it onto the machining platform of the machine tool.
This titanium alloy has extremely high hardness, and is jokingly referred to as the "machine tool killer" by industry insiders.
Lu Wei turned and walked to the old knife cabinet in the corner of the factory. He kicked the bottom of the drawer, and the rusty slide made a sour friction sound.
The drawer was forcibly pulled open, and apart from a rusty second-hand tungsten carbide end mill, there were no other usable cutting tools inside.
"Tsk." Lu Wei tossed the rusty tungsten steel knife onto the table, his expression darkening slightly.
Using this broken blade to cut aerospace titanium alloy will definitely cause strong vibrations once the spindle comes into contact with the material, causing the blade to break on the spot and even destroying the fragile motherboard that has just been connected to the fly wire.
Even a skilled cook can't cook without rice; ordinary tools simply can't handle this kind of demanding test.
As Lu Wei stared at the worn-out milling cutter, a flash of inspiration struck him.
After the system was upgraded to level 2, the material synthesis function remained silent except for advanced scanning.
Since I can't buy top-of-the-line knives, I'll just make one myself.
He quickly walked back to the woven bag and dumped the remaining waste onto the cement floor.
Inside were trace amounts of tungsten slag scraped from old instrument dials, several discarded cobalt metal connectors, and a small amount of carbide residue.
Lu Wei picked up the scrap metal pieces and threw them into the empty iron basin on the workbench.
"Activate the material synthesis function."
As soon as he finished speaking, a blue screen in the lower right corner of his retina popped up with an options interface containing synthesis recipes, listing various molecular combinations of metallic materials.
Lu Wei glanced at it and decisively clicked the confirm option for the high-strength special milling cutter.
A deep blue halo instantly appeared above the iron basin, completely enveloping the messy waste.
This was the first time he had truly witnessed the system displaying its creator-like power at the microscopic level.
Under the blue light, ripples spread across the surface of the waste tungsten slag and cobalt joints.
They were forcibly broken at the molecular level, and the impurities they contained were stripped away by an invisible force, turning into a wisp of black smoke and dissipating.
Pure metal atoms move rapidly in blue light, rearranging themselves according to a lattice structure that transcends conventional processes.
The entire synthesis process did not generate any heat, yet it exuded a breathtaking sci-fi aesthetic.
In just a few seconds, the dazzling blue light suddenly subsided and completely disappeared.
The original scrap material in the empty iron basin had disappeared, replaced by a metal milling cutter with a dark purple sheen on its surface.
Lu Wei reached out and picked up the milling cutter. It felt heavy in his hand, and the edge of the blade reflected a chilling light that was hard to look away from.
[Synthesis complete: High-nitrogen composite tungsten carbide special end mill.]
【Features: Possesses high strength, wear resistance, and high temperature resistance.】
Lu Wei nodded in satisfaction.
With this knife, cutting titanium alloy is as smooth as cutting tofu.
Everything is ready; now it's time to witness the moment of life and death.
Lu Wei strode to the large industrial power distribution box in the corner and placed his hand on the rough handle of the main power switch.
He took a deep breath and used his wrist to forcefully slam the main switch shut.
A powerful three-phase current surged into the long-dormant, thick cable.
The crisscrossing aviation gold wires on the machine tool's motherboard flashed a faint electric spark the instant current passed through them, and then took on the important task of bridging communication.
The external temporary LCD screen flickered twice, displayed a string of white underlying loading code, and then lit up the user interface.
A crisp sound of a relay clicking could be heard coming from inside the control panel.
The long-silent carbonized spindle emitted a muffled roar driven by the motor, and its speed began to soar, causing the special milling cutter to leave afterimages in the air.
At the same time that the machine tool was running smoothly, a long message popped up on the blue screen.
[The underlying physical functions of the target item have been restored.]
[Current item dirt level: 55% (Extensive physical damage and inferior material replacement exist).]
[Status Check: Physical damage and dirt levels exceed limits, preventing a perfect rollback from being triggered.]
The downgrade repair decision has taken effect; only the lost experience points will be issued.
[Experience points gained: 500.]
Looking at the experience points on the panel, Lu Wei patted the dust off his hands, his eyes showing no disappointment.
He never expected to achieve a perfect system backtracking by using a few gold wires of insufficient purity and broken rubber tubes.
As long as we can force the dirt level down below the passing grade and get this pile of scrap metal spinning, the goal will be achieved.
You'll Also Like
-
Star Fleet, Starting with Datafication
Chapter 325 1 hours ago -
Naruto: Traveling Through Time Starting with Seizing the Dragon Vein
Chapter 265 1 hours ago -
One Piece: Blue Scale Admiral
Chapter 941 1 hours ago -
Why bother with dating when you already have a cat?
Chapter 252 1 hours ago -
Tokusatsu: How come this knight drama is different?!
Chapter 735 1 hours ago -
Gundam: From Piece to Player
Chapter 287 1 hours ago -
Primordial Era: Starting with the Immortals of the Jie Sect to Prove the Dao of Hunyuan
Chapter 133 1 hours ago -
After mastering the resurrection technique, they begged me to extend their lives.
Chapter 104 1 hours ago -
Lawyer: Start with legal retaliation against infidelity!
Chapter 352 1 hours ago -
Fanatics of the Magic Academy
Chapter 133 1 hours ago