I asked you to refurbish it, and you turned a scrap car into a supercar?
Chapter 31 Your job looks exhausting.
"It's fucking hot!"
Lu Wei wiped the sweat from his brow.
He just called an installer who will come to install the air conditioner in a bit.
In this sweltering heat, this huge factory is like an oven; if I stayed any longer, I'd probably suffocate.
Disassembling the heart of this rare supercar proved far more challenging than he had anticipated.
The sports car caught fire after the high-speed collision, and the engine compartment was subjected to temperatures of over a thousand degrees Celsius.
Under these extreme physical conditions, the aluminum alloy cylinder block and the internal forged steel parts underwent varying degrees of thermal expansion, causing the crankshaft, which had broken into three pieces, to become firmly stuck in the main bearing.
You can't just smash it with a sledgehammer.
Once the fragile cylinder walls are damaged, this machine with a hidden value of fifteen million will truly only be worth its weight in the scrap yard.
Lu Wei brought over a heavy-duty puller and carefully inserted the chuck into the gap in the bearing cover.
He twisted the top bar screw, the veins on the back of his hands bulging, relying solely on the slow, mechanical meshing force to resist the adhesion caused by high-temperature sintering.
With a few harsh metallic scraping sounds, the stuck bearing loosened slightly.
He then sprayed in a large amount of industrial penetrant and patiently pried it down little by little.
It took him three whole hours to finally remove the three heavy crankshaft fragments intact.
The remains were placed on an anti-static table mat, the surface of which had an eerie bluish-purple hue caused by high-temperature annealing.
Lu Wei rubbed his aching lower back and pulled over a folding chair to sit down.
Disassembly is only the first step; the toughest challenge lies in reverse engineering.
This is the soul of the Porsche Carrera GT, and the factory's requirements for crankshaft dynamic balance and tolerances are extremely demanding.
The crankshaft is now broken into three pieces, and the metal at some of the joints has even been physically twisted, making it impossible for conventional measuring tools to obtain the original, accurate data.
He activated the advanced scanning function of the secondary system.
A blue three-dimensional light curtain unfolded in the field of vision, scanning through the damaged wreckage and constructing a semi-transparent crankshaft outline in mid-air.
But the system is not an omnipotent god.
It can only provide a rough skeleton before the damage based on the existing wreckage.
Lu Wei had to fill in and calculate those minute parameters, such as the micrometer-level eccentricity and the included angle of the oil hole.
He took out a micrometer and a high-precision vernier caliper, and, using the basic model provided by the system, began to frantically reverse engineer on the draft paper.
The weight ratio of each set of balance weights and the chamfer transition of each crank pin require rigorous mathematical calculations.
This takes far more effort than studying theoretical knowledge from books.
The draft paper on the table was filled with writing, then crumpled up and thrown at my feet.
Lu Wei's eyes were bloodshot, and his brain was throbbing from overwork.
In the world of top-tier sports cars, where information barriers are extremely high, trying to deduce the answer by hand is no less difficult than climbing a cliff with bare hands.
Before I knew it, the sky outside the window had completely darkened.
The sound of an electric scooter horn came from outside the factory.
The roller shutter door was pulled up halfway from below, and the male caregiver, Xiao Li, walked in carrying two large insulated boxes.
"Brother Lu, your aunt asked me to bring you your food."
Xiao Li placed the insulated box on an empty table next to him and was stunned for a moment when he saw Lu Wei covered in oil and littered with scraps of paper.
"Your job looks exhausting."
Lu Wei put down his pen, closed his eyes, and rubbed his temples.
"It's a huge, brain-intensive project; we can't rush it."
He walked to the sink, vigorously scrubbed the machine oil and carbon ash off his hands with industrial hand sanitizer, then dried them with a towel and came back.
"How's my dad doing today?"
Xiao Li opened the insulated box, and a rich aroma of beef bone soup wafted out.
"Uncle is doing well. He even did a set of stretches with a rehabilitation video this afternoon. He's full of energy."
"My aunt said you do manual labor outside, so she specially went to the market to pick out beef bones and simmered them for three hours."
Lu Wei took the bowl and chopsticks and began to eat heartily.
The warm bone broth warmed my stomach, easing the tension that had gripped me all afternoon.
This family care became his most effective buffer in this high-intensity industrial maintenance.
While eating, he chatted casually with Xiao Li about trivial matters at home.
After the meal, Xiao Li cleaned up the dishes and rode his bike home.
The factory was once again empty and quiet.
Lu Wei stood up, picked up the final draft of the crankshaft parameter drawing on the table, and his eyes sharpened.
He overcame the difficulties of reverse engineering, and the next challenge was material processing.
He walked to the corner of the aviation waste pile, rummaged around for a while, and pulled out an extremely thick TC4 titanium alloy forging.
This is a core support component disassembled from the main landing gear of a retired passenger aircraft. Its metal density and torsional strength far exceed those of ordinary industrial titanium materials.
Only with such top-grade aerospace materials could it withstand the terrifying centrifugal force of that V10 engine when it exceeds 10,000 revolutions per minute.
However, the size of this blank was too large. For that battle-damaged five-axis machine tool pieced together from wires and scrap metal, this was definitely an extreme load test that challenged the physical limits.
Lu Wei moved the heavy titanium alloy onto the machining platform of the machine tool.
He turned the screw of the heavy-duty vise, added the upper stop, and used a large adjustable wrench to lock the material in the center of the clamp.
He turned around to inspect the new pneumatic equipment delivered by Lin's Electromechanical.
The air tank of the variable frequency air compressor is fully pressurized, and the refrigerated dryer is operating normally.
He removed the tool holder from the machine tool spindle and replaced it with a brand-new, high-nitrogen composite tungsten steel end mill.
He then turned on the bottom coolant circulation pump and confirmed that the pipes were filled with the several barrels of aerospace-grade water-soluble coolant.
Walking to the control panel, Lu Wei unfolded the oil-stained drawing.
Fingers tapped on the worn keyboard, inputting a series of complex cutting codes into the system.
He set the roughing feed rate to the maximum threshold that the machine tool could currently withstand.
Pressing the green start button seemed to cause the air in the entire factory to tremble.
Milky white coolant shot out from the rubber nozzle, forming a thick water curtain above the titanium alloy blank.
The spindle motor let out a deep roar, and its speed instantly soared.
The sharp tungsten steel blade sliced through the water curtain and plunged deep into the hard aerospace titanium alloy.
The ear-piercing sound of metal cutting echoed in the empty factory, and dazzling sparks still flew everywhere despite being washed away by the coolant.
The immense cutting resistance was transmitted along the main shaft to the fuselage frame, and the roughly welded aircraft skin creaked under the strain.
The entire machine tool resembles an old ox carrying a heavy load.
Lu Wei stood beside the control panel, his eyes fixed on the various parameters on the instrument panel, his palms sweating.
If the spindle deviates by even a millimeter, this expensive titanium alloy blank will be scrapped on the spot, and may even directly sever the fragile communication circuit inside the machine tool.
Just as the roughing process had been running smoothly for half an hour and the cutter head was peeling off the first thick layer of excess material, the screen of the mobile phone placed on the operating table suddenly lit up.
A short notification tone pierced through the noisy mechanical sounds.
Lu Wei turned his head and glanced at it.
A new private message from a verified official account popped up in the notification bar of the short video platform.
The sender was the heavy industry company that had seen through the true nature of the machine tool business.
You'll Also Like
-
Star Fleet, Starting with Datafication
Chapter 325 2 hours ago -
Naruto: Traveling Through Time Starting with Seizing the Dragon Vein
Chapter 265 2 hours ago -
One Piece: Blue Scale Admiral
Chapter 941 2 hours ago -
Why bother with dating when you already have a cat?
Chapter 252 2 hours ago -
Tokusatsu: How come this knight drama is different?!
Chapter 735 2 hours ago -
Gundam: From Piece to Player
Chapter 287 2 hours ago -
Primordial Era: Starting with the Immortals of the Jie Sect to Prove the Dao of Hunyuan
Chapter 133 2 hours ago -
After mastering the resurrection technique, they begged me to extend their lives.
Chapter 104 2 hours ago -
Lawyer: Start with legal retaliation against infidelity!
Chapter 352 2 hours ago -
Fanatics of the Magic Academy
Chapter 133 2 hours ago