I asked you to refurbish it, and you turned a scrap car into a supercar?

Chapter 55 Those who just said the streamer was faking it, step forward!

Holding up his phone, Xiao Liu frowned and pressed, "Not among these large items? Then where is it?"

Several other young people also gathered around, their faces full of curiosity.

Lu Wei did not rush to answer, but turned to look at Du Haifeng beside him.

"Director Du, please turn on the switch first to get the machine running."

Upon hearing this, Du Haifeng, who was standing aside watching the commotion, was stunned: "It's already been taken apart, how can it run away? I hope nothing bad happens."

Lu Wei waved his hand: "Don't worry, removing the panel won't affect operation. The malfunction is intermittent, and the specific problem won't be apparent in a short time if it shuts down."

Du Haifeng was unsure of what to do, and his gaze fell on Gao Jianjun.

Gao Jianjun nodded.

With the leader's signal, Du Haifeng raised his hand to turn on the switch, and the machine roared to life, with the main shaft starting to run.

The technicians exchanged glances, somewhat confused about what Lu Wei was trying to do.

Lu Wei stood there, staring intently at the parameters on the panel for a full two minutes.

The rotation speed is stable, the temperature is normal, and all data are normal.

If I hadn't been told beforehand that this thing had malfunctioned, I wouldn't have noticed the problem at all.

Meanwhile, the comments section was still buzzing.

"Just arrived, what are you doing here?"

"Live-streaming machine repair? Wow, that machine doesn't look cheap!"

"How do you explain the plagiarism?"

"They even removed the panel and still dared to run away. They're really bold."

Three more minutes passed, and the machine still did not report any errors.

"Could it be that he's recovered?" Du Haifeng muttered to himself.

A technician nearby whispered, "Yesterday it took us almost half an hour to get the error message."

Lu Wei squatted down and gently patted the side wall of the control cabinet a few times.

The machine immediately sounded a sharp alarm, and the spindle speed dropped sharply.

Du Haifeng immediately said, "That's exactly the problem. How come it reproduces as soon as you take a picture?"

The comments section immediately became very active.

"I blanched it, and the error message reappeared after just one tap?"

"I can do that too. I used to film like that when my TV broke when I was a kid."

"Hilarious! Is this the legendary physical therapy?"

"I told you Cook was something, but you didn't believe me. Why did you insist on believing that basket?"

Lu Wei straightened up and patted the dust off his hands.

"See? It reports an error as soon as you tap it, you don't have to wait that long at all."

"What does this mean?" Lu Wei asked, then looked at Xiao Liu.

Xiao Liu was stunned for a moment, then tensed up. After thinking for a few seconds, he slowly said, "It's...it's a problem with physical contact, it has nothing to do with the parameters."

Lu Wei clapped his hands with admiration and said, "Smart."

He pointed to the base of the machine.

"When the spindle is running at high speed, there will be a vibration at a fixed frequency. It may be that a certain solder joint or connector just happens to come loose at that frequency, and the signal will be interrupted. When it stops, the vibration will disappear and then it will be restored."

The room was very quiet, and everyone stared at him with surprise.

"Is it really that simple?" Du Haifeng asked, somewhat incredulously.

Lu Wei ignored them and instead looked at the technicians.

"It's very simple to investigate."

"When you were conducting your investigation, were the machines stopped or running?"

The group exchanged glances, then finally looked at Xiao Liu.

Xiao Liu said, "It's for a shutdown inspection."

Lu Wei clapped his hands and said, "Then that matches up!"

"It was fine when I checked it during shutdown, so how could I tell?"

Xiao Liu opened his mouth, but couldn't say a word.

Lu Wei took out a multimeter and began measuring the signal links on the motherboard, one level at a time.

"The servo driver is outputting normally."

"The encoder feedback signal is also normal."

"The motor drive circuit is working fine."

Each time a level was tested, he would move aside to make sure everyone around could see him clearly.

The young men initially looked at each other blankly, but eventually pulled out their phones and started recording.

At this moment, Lu Wei is the teacher, and they are the students.

When Lu Wei reached the feedback signal processing board, he stopped.

The numbers on the multimeter flashed once, returned to normal, and then flashed again.

Lu Wei held up the multimeter.

"The problem lies here: the feedback signal processing board is intermittent, sometimes it doesn't work and sometimes it doesn't."

Xiao Liu frowned, somewhat puzzled: "The key is that we measured this board before, and it's working..."

Lu Wei nodded and said, "It was indeed working when it was shut down, but once it started running, it immediately went offline. Believe me, it'll be working again the moment you stop it and measure again."

Xiao Liu fell silent, his face full of thought.

The comments section was flooded with messages.

"Hahahaha, Glasses Guy is having an existential crisis."

"I've learned it, I've really learned it. It's like when I'm moving, it's definitely flowing, but as soon as I stop, it immediately stops flowing. It's the same principle."

"What are you thinking? I'm talking about unclogging the toilet."

"Cook is truly Cook, so meticulous!"

"Compared to them, these young people are still too inexperienced!"

Lu Wei turned off the machine, pulled the motherboard out of the slot, and flipped it over.

After taking a look, my eyes lit up.

"Yes, I was right, that's the problem."

In front of everyone, he pointed to a row of surface-mount capacitors.

"The feedback loop of the signal processing board is here. One of the solder joints in this row of capacitors is fatigued. It looks fine normally, but it will crack when vibrated and close when it stops."

Xiao Liu went closer to take a look and his face showed surprise.

"It really is true!"

"There is a micro-crack at the root of the second solder joint. You really can't see it unless you look closely."

Du Haifeng waited for a while before finally asking, "Master Lu, can this be repaired?"

This is what he's most concerned about right now; he doesn't care about the problems involved.

"Yes, they can. Just clean up the old solder joints and re-solder them. Any of them can do it."

At this moment, Xiao Liu volunteered, "I'll do it!"

Then, Xiao Liu clamped the motherboard in the vise and picked up the pointed soldering iron next to him.

With a quick dip and a flick of the soldering iron tip, the old solder on the solder joint is cleaned away.

They re-tinned and spot-soldered, their movements were clean and efficient.

After finishing all that, Xiao Liu blew off the solder residue on the board and put the motherboard back in.

"Close the gate!"

The machine started running again, all the indicator lights on the panel lit up, and the spindle started to turn.

One minute, five minutes, ten minutes...

Half an hour later, there were still no error messages, and the engine speed remained steady.

Just to be on the safe side, Du Haifeng had someone shift the engine speed several times, and everything was normal!

Du Haifeng looked at Gao Jianjun with a face full of excitement.

"Mr. Gao, it's really healed!"

At this moment, the live chat was filled with cheers.

"It's actually fixed! This guy's got real skills! I'm following him."

"Those who just said the streamer was faking it, step forward!!!"

"With this one trick alone, even the copycat from the southern suburbs couldn't figure it out!"

"That's real skill; that blondie can't even compare!"

The comments that were previously accusing the company of plagiarism have now been completely drowned out.

Occasionally, one or two people might still try to argue, but they are immediately overwhelmed by the flood of comments and can't make a ripple.

Lu Wei took the phone from Xiao Liu.

Lu Wei coughed lightly in front of the camera.

"As for the plagiarism, I'm sure everyone knows it. The innocent are innocent, and I have nothing more to say."

"As for those who want to learn technical skills, they can follow first-hand live streamers."

"The work is done, so let's end the live stream here for today."

Lu Wei shut down the live stream.

Gao Jianjun raised his hand and clapped, a smile playing on his lips.

After all, he was the one who invited this powerful figure.

Lu Wei's performance just now certainly deserves applause.

"Master Lu, that was fantastic! It truly broadened my horizons!"

Several technicians gathered around, some offering cigarettes, others giving a thumbs-up.

Xiao Liu approached, his face full of admiration: "Master Lu, can I add you on WeChat? I'd like to ask you a few questions."

Lu Wei smiled and said, "Just follow me. If you have any questions, you can send me a private message."

Lu Wei spoke as he tidied up.

Du Haifeng, who had just gone out to answer a phone call, approached Lu Wei and the other man, looking somewhat embarrassed.

Gao Jianjun frowned: "What is it? Speak."

Du Haifeng coughed lightly and said, "General Manager Gao, Master Lu, we just received a call from Workshop Six. A coordinate measuring machine... has suddenly stopped working."

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like