I asked you to refurbish it, and you turned a scrap car into a supercar?
Chapter 81 This round is called "trade-in".
Around 3 p.m., the truck slowly drove into the factory in the southern suburbs.
After unloading the equipment, Wang Jianye walked around the factory building again, exchanged a few polite words, and then drove away.
Lu Wei pulled down the roller shutter door, and the factory immediately fell silent.
Lu Wei walked to the tin box, lifted the lid, and reached under the tarpaulin to take out the square box wrapped in foam paper.
He simply unwrapped the foam paper and held a dongle with a frosted aluminum alloy casing in his hand.
The outer casing is printed with a row of small German letters, the connector is plated with a layer of gold, and a short cable is trailing at the end, with a standard serial port plug at the other end of the cable.
Lu Wei weighed it in his hand, then turned it over and looked at it again. The equipment wasn't fixed yet, so he wasn't in a hurry to plug it in.
He placed the dongle on the worktable.
A string of scanned information appeared in my mind, which was different from before.
[Target Item: Original factory-tuned dongle, compatible with all A10VS28 series.]
[Core licensing agreements and German-engineered marine engineering underlying verification algorithms have been detected, enabling pixel-level full data reading.]
[Start backup?]
Lu Wei didn't hesitate for long and directly confirmed.
The progress bar in front of me started to move slowly.
The data was refreshed line by line.
A few minutes later, a message popped up: "Authorization agreement read complete, underlying verification algorithm read complete, data synchronized."
It's not that he's overly cautious, but being cautious isn't necessarily a bad thing.
Now that he has this data, this series of devices is like having a universal key in his hands forever.
If you encounter similar problems in the future, you won't need to search for various information or ask the original manufacturer for help, since asking them for help would be pointless.
Even if the dongle is lost, it's just a matter of creating a new one for him; the core has already been stored in the system.
After backing up the dongle, he turned and walked toward the three water-damaged devices.
Knuckle boom cranes, winches, and hydraulic pump stations are lined up in a row, occupying most of the open space in the factory.
In the morning, he only glanced at it briefly and did not conduct a thorough examination.
"Start scan".
As soon as he finished speaking, the blue three-dimensional mesh instantly pierced through the thick metal casing, exposing the horrific state of the equipment's interior to him without reservation.
Looking at the scene before him, Lu Wei frowned.
The reality is far worse than what we see.
He then removed the rain cover from the control cabinet, revealing the main control board inside, which was covered in green mold.
Wang Jianye had told him from the beginning that he had consulted those technicians before, but they all directly sentenced him to death.
The reason for this is that the motherboard is an expensive 6-layer high-density PCB board.
After seawater seeps in, the highly acidic and alkaline salt water not only corrodes the surface layer, but also penetrates into the inner layer through the gaps in the glass fibers of the board.
This resulted in large-scale breakage of the fine traces and metal vias inside the 6-layer board.
Such internal fractures are absolutely impossible to locate with the naked eye from the outside.
It's even more impossible to use a regular soldering iron for multi-layer soldering, because that would just ruin the whole thing.
Even if it's sent to the original manufacturer, the engineers there will only know this one trick.
Lu Wei crouched down, and the three-dimensional optical mesh penetrated the negative copper layer of the motherboard, presenting the internal wiring structure of the 6-layer PCB in a three-dimensional way before his eyes.
The break points caused by electrochemical corrosion are marked in red on the optical network, with a total of 37 break points.
Instead of rushing to start, he used a brush dipped in anhydrous ethanol to carefully scrub away the green mold and salt crystals on the surface.
He then pulled out a bottle of high-purity oxygen-free copper powder from the drawer.
"Synthesis initiated."
As Lu Wei finished speaking, a faint light curtain appeared on the surface of the multilayer board.
The copper powder was liquefied and peeled off by the system at the microscopic level, and seeped into the multilayer board through the capillary fractures that were invisible to the naked eye.
Through thermal effects, molten copper powder is guided to be redeposited inside the six-layer plate.
In just a few minutes, the 37 broken inner layer traces and metal vias were refilled with high-purity oxygen-free copper.
All the breakpoints at the micro level were reconstructed, and a stable connection was re-established on the six-layer circuit board.
After dealing with the circuit board, Lu Wei removed the proportional valve of the hydraulic pump station.
This is also the problem that outside repairmen cannot solve.
Due to prolonged immersion in seawater, the metal surfaces of the proportional valve and winch precision valve core suffered severe saltwater pitting, with the valve core surface covered with tiny rust pits.
This type of pitting corrosion can cause internal leakage of hydraulic oil, preventing the system from reaching its rated operating pressure during operation.
According to the maintenance guidelines of major manufacturers, once the surface of such a precision slide valve is pitted, there is no other way but to replace it.
Because manual polishing and grinding will directly increase the tolerance, once the valve fitting clearance becomes larger, internal leakage will become more serious.
For the repair technicians nearby, there was simply nowhere to find genuine parts for replacement.
But this is not a problem for Lu Wei.
He quickly recalled the three-dimensional grid of the valve core in his mind.
He grabbed a handful of special alloy powder from the nearby scrap box and evenly applied it to the surface of the valve core.
Start synthesis.
As soon as he finished speaking, the alloy powder applied to the surface of the valve core perfectly filled the rust pits of varying depths.
Excess foam was directly removed, and the valve core surface was restored to an extremely smooth state.
"This wave is called 'trade-in'."
Lu Wei murmured to himself with a hint of smugness.
Lu Wei then reinstalled the restored valve core into the proportional valve. The size was just right, and it was no different from a brand new one.
Next was the oil pump bearing of the folding boom crane. Lu Wei used the same method to prepare alloy powder and used the synthesis function to repair the wear layer on the outer surface of the bearing.
The hydraulic cylinder of the boom of the folding boom crane also underwent a major overhaul to ensure that the piston would not jam.
After repairing all the internal damage to these three major items, Lu Wei wiped the sweat from his forehead.
He reinserted the reconstructed 6-layer main control board into the slot and connected all the wires one by one, with a crisp click from the clips.
When the test power is turned on, the small screen on the control cabinet lights up instantly.
A line of red German text appeared on the screen: System bus error, link deadlock.
Lu Wei was not surprised to see this line of text; everything was still under his control.
He calmly took the original dongle from the drawer.
He plugged the dongle into the console's serial port.
The system's internal self-test indicator light flashed twice.
The red text on the screen instantly went out, and a light blue menu appeared.
The message above clearly states: Original factory authorization detected, system unlock successful, all axes are now allowed to operate.
"OK".
Lu Wei clapped his hands, quite satisfied with his work.
You'll Also Like
-
Naruto: I get stronger by drawing lots
Chapter 426 3 hours ago -
Crossover Anime: Transmigrated as Sasuke, but Must Start from Prince of Tennis
Chapter 242 3 hours ago -
Miss Wang Weina, even your cousin won't do!
Chapter 339 3 hours ago -
Starting with Blood Healing to become an Ancient God
Chapter 242 3 hours ago -
I, the mastermind behind the scenes at Soubu High, refuse to be caught in a bloodbath.
Chapter 158 3 hours ago -
The Infinite World of Weapon Girls
Chapter 287 3 hours ago -
Starting from the roots of Konoha, they were the masterminds behind the scenes.
Chapter 276 3 hours ago -
Douluo Sharingan, I really didn't coerce Xiao Wu!
Chapter 293 3 hours ago -
Reborn in America: Starting as a California Resident
Chapter 174 3 hours ago -
Ultraman: I am really just a human.
Chapter 767 3 hours ago