Coquettish Rebirth

"Grandpa, why do I feel like it would be better if I had a back push? Why did they...why did they get rid of the back push?" Jia Hongjian said, pushing his chin slightly towards the Australian. for a moment. "This is because a good gearbox must be smooth! How to put it, unless the unit power of the car is too large, according to the industry's internal standards, the smaller the pushback feeling, the better. Because the smaller the pushback feeling, It means that the shifting is smoother and more natural! The best transmission is the one that can change gears just like a continuously variable transmission, which makes people feel almost nothing. The car has good horsepower, and you will feel a certain push back when starting , but it is actually not a very good thing to have a feeling of pushing back during driving, because it means that there is a certain setback in shifting! Even in some low-end and mid-range cars, manufacturers will deliberately set the transmission It has a push-back feeling, and it seems that my car has strong horsepower when overtaking and shifting gears. In fact, such a push-back feeling is created by cheating—shift to a low gear at the moment of shifting, and then shift to a high gear. Passengers can feel the push back, but what is the push back?"

Having said that, the old man paused for a moment, and then said with a displeased face: "The feeling of pushing back is actually a quantitative evaluation standard subconsciously found by some domestic consumers who are not familiar with cars. In fact, it is really In those countries where people have been driving for nearly 100 years, people don’t emphasize the feeling of pushing back. The people in our country don’t know much about it. During the test drive, when they feel that the gas is kicked down, the car will jump forward violently. This is the performance of strong power, which means that the car is well adjusted and matched. In fact, what they don't know is that this is the performance of the car that has not been adjusted well! Some manufacturers have discovered this quantitative standard of our people, so they deliberately Changing the throttle setting makes it very sensitive. Let consumers lightly kick the gas when driving, and the car will go forward suddenly, giving consumers the feeling that the power is very strong, but in fact it is just to increase the sensitivity of the throttle That's all. The accelerator with such a high sensitivity is actually not easy to control at all. If you are not careful, the car will slam. This is prone to accidents! And it is like a traffic jam, it is easy to cause a pedestrian to rush forward, Then I stepped on the brakes quickly, causing people to sway back and forth. Is this comfortable?"

When the old man said this, he suddenly became serious, and he continued to criticize: "According to common sense, the manufacturer adjusts the accelerator or the pedal-acceleration characteristic. There should be a curve to design it. In the first half of the The sensitivity should not be high at the time, so that it is convenient for consumers to control, so as not to rush forward too much, and the initial sensitivity of the throttle is not high, which is convenient for fuel saving. Then the second half of the throttle will be set to be relatively sensitive. What is the pursuit? When driving in the city, the manoeuvrability of following the car at low speed is good, and then when you get on the high speed or the road conditions are better, the speed will immediately rise when you step on the gas. This is what you want most. The effect! The gearbox is the same. The gearbox is well adjusted. The matching is good. In fact, the effect is that the G force during acceleration should be averaged, that is, it should not make people feel that there is a push back when shifting up, that is, let the When people can’t feel it when downshifting, the whole person will go forward, this is the best! If it’s up to the consumer’s feeling, then CVT’s continuously variable speed will have to be ********** It’s intentionally designed to be frustrating!”

Whoa!Is there still so much knowledge in the design of the accelerator and shifting of the car?But think about it, the acceleration performance of the car and the acceleration feeling of pushing back are actually two different things!Especially at high speeds, because of the different reference objects, it is actually difficult for people to perceive their own speed on high speeds, and it may feel that they are driving at 80 speeds.In fact, I looked down at my watch, oh, it's all 140!People always think that a good acceleration means a strong push back feeling, but in fact, how fast the speed is really has no direct relationship with whether the push back feeling is strong or not!The car's acceleration is weak.It is also possible to force the push back feeling through the design of the accelerator and the gearbox, so what is the use of this push back feeling?

But to be honest, there is no quantitative indicator for how a car feels when driving, how it handles, and how smooth it is such as acceleration and gear shifting.It is not easy to be noticed by people, and the feeling of pushing back is the easiest to be noticed, so it is naturally easy to be used as an indicator.Just like a camera, consumers always choose the resolution or something. In fact, whether the imaging effect of a camera is good or not has nothing to do with the resolution!In the case of a certain area of ​​the photosensitive chip and the same aperture, there is a certain amount of light entering the camera within a certain period of time.With such a certain amount of light, the higher the resolution, the less light is actually distributed to each pixel of the photosensitive element!When the number of pixels reaches a certain level, when the amount of light distributed to each pixel reaches a certain level, the imaging effect is actually no better than that of fewer pixels!But many consumers don't understand this truth. They can't quickly quantify the imaging effect, so they can only rely on the resolution as an indicator!

Smartphone manufacturers in history were driven crazy by consumers’ habit of only looking at the resolution. They knew that the effect of increasing the resolution may not be good, but consumers only look at the resolution, so why? What to do?They can only increase the resolution of the camera according to the requirements of consumers.And in history, Apple can stand up and say that they don't increase the resolution, they only use the resolution they think has the best imaging effect.Only Apple in history had that kind of identity, and Apple fans accepted such a design!Otherwise, if other manufacturers come, consumers will definitely turn around and buy other mobile phones, okay?

Thinking of the design of the car, Jia Hongjian didn't think of any setting of the accelerator and gearbox of our car in the future. After all, there will be time to think about these things later. What he is thinking about now is this-"Old man, then according to In your opinion, their gearbox is good?" "Well, yes, very good! Although they have not implemented CVT infinitely variable transmission, they have done a good job with this 6AT transmission, and the driving experience is already similar to CVT. Yes, from such a perspective, their skills are really good! At least in terms of matching and adjusting the gearbox on this large-displacement car, their skills are really good!" The old man praised while nodding.Ah!So it sounds like we've found the baby again?Maybe the gearboxes of DSI used to be used for trucks and various agricultural machinery, maybe they have only entered the field of passenger cars for a few years, but at least they are still well-adjusted and fit in the automatic gearbox, at least it proves that They are still good enough.They haven't developed CVT or anything, it's just that they don't have enough time. Maybe after taking over the company, as long as they spend enough money and give enough time, they can still keep up with the international level?

Next, the old man led Ding Haitao to hold a symposium with DSI's chief technology officer and technicians. Needless to say, the old man just wanted to check how his technology was.The result of such a symposium was that the old man recognized DSI's technology, and thought that buying DSI would be a good thing for Huaxia Automobile!Now that our chief technical expert has said so, what else can we say?Just talk about the price!

Since we want to talk about the price, it is natural to look at the accounts of DSI.It doesn't matter if you look at it, Jia Hongjian really found out why DSI is so interested in our Chinese company - the total assets of the company is just over 1 million US dollars, but now there are already loans that are about to expire. $1 million!That's right, three years ago, in order to expand their production capacity and cling to Ford and Chrysler's thighs more tightly, they used large loans to build new factories and invest in R&D. It turned out to be a good thing, just as their loans were about to expire. At that time, Ford was in trouble and wanted to cut production, and the first thing to cut was an unimportant market like Australia!Then Chrysler was also sold by Mercedes-Benz in Germany because it was not very profitable.Although it is an American company that bought Chrysler from Mercedes-Benz, the American company is actually just an investment company, and the company itself came to invest and be the boss.After the company passed over, people found that the economic situation in the United States was not good, and the decision they made was to let Chrysler reduce production and then shrink back to the United States!

In this way, DSI's major customers suddenly disappeared, the expected orders also disappeared, and the expected money also disappeared. In this way, and the loan is about to expire, is it imminent?At the same time, they still have to pay their employees wages. Now that there is basically no business income, they have to repay the loan and pay wages. In terms of orders, it can be said that their factory will be insolvent and bankrupt if it lasts for a year at most!In such a situation, they discovered that a Chinese manufacturer was interested in them, so why not hurry up and say hello?After all, if they say hello now, they have not lost money and are not insolvent, so they can make some money for shareholders if the company is sold!A few months later, it may be that the shareholders can't make any money, they can only escape with capital preservation, if it is delayed for a year, the shareholders may lose all their money, okay?When the time comes for bankruptcy, various assets will be directly seized by the court and then auctioned off, and the money from the auction will be directly returned to various debtors. In the end, the money invested by the directors will definitely not come back!

So, how much do we offer?What is certain is that the board of directors of DSI will definitely hope that we will also directly bear the debts of DSI during the acquisition, so that the directors of the company can take the money and leave without debts! (~^~)