I, the Black Technology Boss, Start the Anger Expert

Before Yekong Technology, the 5nm lithography machine produced by the lithography machine giant did not have such a high yield rate of chips!

In the past, because of their monopoly, only they could produce 5nm lithography machines in the world.

This makes everyone feel that the 5nm chip yield rate is not high.

And the cost of the lithography machine is definitely very high.

But now, with the emergence of Yekong Technology's lithography machine, they found that this kind of lithography machine of Yekong Technology is simply a hammer for the lithography machine produced by the lithography machine giant!

This is too scary.

And the price is relatively low!

Many countries in the world now think that because of the sanctions imposed by the Lighthouse Nation, Yekong Technology has no way to continue manufacturing chips.

In the absence of OEM, some 5nm lithography machines can only be exported to stop losses.

All many companies began to order lithography machines with the mentality of picking up cheap prices.

"Impossible...it's absolutely impossible..."

At the same time, the lithography machine giant also ordered a 5nm lithography machine produced by Yekong Technology through its own shell company.

After the arrival of the 5nm lithography machine, they also began to study the 5nm lithography machine.

But the results of the study were far beyond their expectations!

"Our yield rate can be said to have reached [-]%."

"...The yield rate of their Yekong Technology, after removing the unusable areas in the corners, is [-]%."

At this time, an engineer spoke to a group of high-level executives of the lithography machine giant.

As he spoke, his lips trembled a little.

The results of this 5nm lithography machine test are really crazy.

Just listening to it like this is incredible.

But the results of this test are indeed the case.

"How efficient is it?"

The lithography machine giant boss couldn't help but speak out at this time.

[-]% yield rate?

It sounded like a breath of fresh air.

"The efficiency is also very high, which is 56% higher than the efficiency of our same [-]nm lithography machine..."

At this time, the engineer also bravely spoke out.

The data announced now sounds incredible.

It was really shocking.

"In the end, how was it done?"

Listening to his words, everyone (Zhao De's) couldn't help but gulped secretly at this time.

They are the ones who make lithography machines. Of course, they know how difficult it is for a lithography machine to improve its yield and production efficiency.

But for Yekong Technology, it was like playing.

In a short period of time, not only has a 5nm lithography machine been released, but the yield and efficiency of this lithography machine for lithography are too high!

It's just ridiculously high.

If they hadn't seen it with their own eyes, as well as the data reported by their own engineers, they wouldn't believe it, this is true.

"Damn..."

The lithography machine giant boss also gritted his teeth at this time, and his eyes were also full of disbelief.

His face was also pale and cold now.

Once Yekong Technology's 5nm lithography machine is released, the entire market will abandon them and turn to Yekong Technology! .

Chapter 119

After all, Yekong Technology's lithography machine has an amazing improvement in efficiency and yield compared to the lithography machine produced by them with the same process.

What's even more terrifying is that this price is much lower than theirs!

"By the way, Yekong Technology also comes with ten [-]-inch wafers."

At this time and time, the engineer seemed to have thought of something, and suddenly said.

"[-]-inch wafer?!"

As his voice just fell, the high-level people present were stunned for a moment.

Of course they know about wafers.

In the past, the world's chip giants were also developed together.

But for various reasons, this plan failed.

So far, no company has developed the technology for [-]-inch wafers.

This Yekong Technology has actually developed an [-]-inch wafer?

At this time, the rest of the engineers have begun to take out those [-]-inch wafers for demonstration.

Looking at the beautifully cut [-]-inch wafers, the lithography machine giant boss and the rest of the high-level executives opened their eyes wide.

"They have really developed an [-]-inch wafer!?"

One of the high-level executives walked over at this time, looking at the perfect wafer in front of him, his eyes widened.

The body trembled a little.

"Isn't it an [-]-inch wafer? To manufacture, those fabs can also manufacture it,"

Another high-level executive couldn't help but grit his teeth at this time.

It is not impossible to manufacture large-scale things like wafers.

But depending on the yield rate, if the yield rate is very low, it is just a gimmick to manufacture, and it will not improve the efficiency at all.

"Well, and with an [-]-inch wafer and related equipment, all of them must be updated. The financial investment required for this is very large, at least hundreds of millions of investment!"

"Yes, can their lithography machine support lithography on [-]-inch wafers?"

"Even if it can be supported, what will happen to the efficiency of lithography?"

"..."

At this time, the surrounding high-level people have begun to discuss constantly.

The core of the discussion is basically that the ten [-]-inch wafers that Yekong Technology came with are just a show, that is, a gimmick.

It won't be of much use at all.

"Lithography first."

"Use their [-]-inch wafers and try lithography."

The lithography giant boss pondered for a while at this time, and then said.

The rest of the senior management also stopped discussing, and after being stunned for a while, they also nodded.

"Yes, try lithography, and you can create the effect."

Soon, those engineers, according to their requirements, began to try lithography with the [-]-inch wafer.

They stood in the clean room surrounded by clear glass, looking inside.

Eighteen-inch wafers can be normally put into Yekong Technology's 5nm lithography machine for lithography!

Seeing this scene, their faces also became slightly ugly.

Although they had thought of this for a long time, watching this scene at this time still made them feel very uncomfortable.

When the [-]-inch wafer was just tested, it was able to be manufactured perfectly, and now it is also compatible with [-]-inch wafers.

And with the start of the lithography operation, in a short period of time, the lithography of one of the [-]-inch wafers has been completed.

"It's done!?"

"How much time!?"

One of the executives saw the [-]-inch wafer that had been lithography completed, and at this moment he couldn't help but open his eyes.

Their eyes are wide open now, and their eyes are still full of disbelief.

Because logically speaking, this efficiency should be slower than lithography [-]-inch wafers, right?

"It's the same as the efficiency of a [-]-inch wafer lithography machine."

An engineer has long been counting the timing of lithographic wafers.

It was also quickly calculated.

"Same?"

Hearing his words, everyone around was dumbfounded.

Different size wafers, the time required for lithography is the same!

This is too incredible!

Thinking of this, everyone began to have a headache.

"Continue to test the cutting, and test the chip yield after packaging."

"Then the rest of the [-]-inch wafer, continue lithography"

The lithography machine giant took a deep breath at this time, and then continued to speak.

"it is good."

The engineers over there continued to follow the instructions of the lithography giant and continued to start testing at this time.