I, the Black Technology Boss, Start the Anger Expert

In a short period of time, the wafers were lithographically completed.

Each of these [-]-inch wafers can be photoetched normally, and the photolithography is completed in a short time.

Soon, the ten lithographically completed wafers also began to be packaged.

In a short period of time, it was obvious that a piece of packaged chip appeared.

"Yield rate... [-]%."

Soon, the last engineer also gave the test data of the chip.

Yield rate, [-]%! ! !

"This is impossible!"

Looking at the data of this test, these high-level executives are all going crazy.

The efficiency of this lithography machine is indeed too high and exaggerated.

Coupled with this [-]-inch wafer, it is simply invincible.

"The yield of their [-]-inch wafers shouldn't be so high, right?"

At this time, these high-level officials also began to look at each other.

If the yield rate of such [-]-inch wafers is so high, then the whole world will be the world of [-]-inch wafers!

"It shouldn't be possible."

"The manufacture of wafers is actually very complicated. It is not that simple to manufacture these [-]-inch wafers with a high yield rate."

At this time, the lithography giant boss also said solemnly.

Although Yekong Technology gave too many shocks, he still did not want to believe that Yekong Technology's [-]-inch wafer yield rate would be so high.

"Yes, this kind of wafer technology has not been improved for so many years. I don't believe that a mere Yekong technology can be produced!"

"Yes, they just made some improvements after stealing our technology, and the mature technology of [-]-inch wafers is not available in the world!"

"..."

The other seniors also nodded at this time.

But what they said now sounded a bit self-deceiving.

Now that they have been hit enough, they are definitely not willing to believe without actually seeing the production of mature [-]-inch wafers.

"Boss, what should we do first? Will this 5nm lithography machine be dismantled?"

At this point, an engineer hesitated for a moment, and then spoke up.

To dismantle or not to dismantle?

When everyone heard the dismantling, their scalps felt a little numb. .

Chapter 120

Before, in order to study Yekong Technology's 7nm lithography machine, I had to disassemble it many times, but it didn't work!

And also directly dismantled a few.

One set is worth [-] million Yanlong coins!

Now this 5nm lithography machine, but a billion Yanlong coins~, is more expensive.

If one is dismantled, it will be a direct loss of one billion -!

"For the time being... don't dismantle it."

The lithography machine giant boss thought for a while at this time, and then sighed.

This one, like the 7nm lithography machine purchased before, will not be so easy to disassemble at all.

After all, there is no way to disassemble the 7nm lithography machine normally. It is even more difficult for the 5nm lithography machine to be disassembled normally.

The other high-level officials nodded when they heard his words at this time.

They have no confidence in dismantling the lithography machine now.

After all, we have already lost so much in the past. If we continue to lose money, those shareholders will make trouble.

"Then what do we do now?"

One of the high-level executives looked at everyone at this time, and also looked at each other a little at this time.

Now this 5nm lithography machine is bought back, and it also proves that Yekong Technology's 5nm lithography machine is indeed very remarkable.

But now they have no way to dismantle it, and no way to check Ye Kong Technology's lithography machine, what method is used to make the efficiency so terrifying.

They also did not do any OEM, mainly selling lithography machines.

Now this lithography machine of Yekong Technology is just a decoration here.

"By the way, boss, I have a good idea."

At this time, one of the men seemed to think of something, and a wicked smile appeared on the corner of his mouth.

"Say."

When the lithography machine giant boss heard the words of the high-level man at this time, he immediately said.

The eyes of the others also looked towards him at this time.

"I thought, what if we bought all Yekong Technology's lithography machines?"

All bought?

Hearing his words, the others were slightly startled.

"These lithography machines must be the lithography machines they are going to put into the production line. Now, because there is no way to OEM Kirin's chips, their production line is equivalent to being cut off, so they have no way to lower the price. Sell ​​these 5nm lithography machines for stop loss.”

"But their lithography machines are also limited. We bought their lithography machines. When they can no longer continue to produce, we will change the casing and sell them at a higher price."

He continued to speak at the time.

"This idea is not bad, but it can't be sold in the name of our company."

One of the senior executives also nodded at this time.

"Yes, buy all their lithography machines, and then sell them at a high price!"

Some high-level officials also continued to speak out at this time.

"That's not good."

"What if they produce the efficiency of the lithography machine, very fast?"

The lithography machine giant boss frowned at this time.

"probably not."

"After all, the time required to assemble a 5nm lithography machine is not that easy."

Another person also spoke at this time.

"And now companies in many countries want Yekong Technology to stock up more when it sells 5nm lithography machines at low prices."

Listening to their words, the lithography machine giant boss also frowned at this time.

Why don't you buy Yekong Technology's lithography machine at a low price now...

"Moreover, if they don't ship, they will have to pay three times the compensation. Now companies in many countries are placing orders. As long as Yekong Technology can't ship the goods in time, they will pay!"

……

At this moment, not only the lithography machine giants, but also a large number of companies in other countries are starting to place orders frantically with Yekong Technology!

"Because the Kirin company was sanctioned, Yekong Technology has no way to do OEM now. Their 5nm lithography machine is being sold at a low price on the official website!"

"Hurry up and buy! Yekong Technology's 5nm lithography machine is on sale at a low price!"

"The speed of assembling the lithography machine is not so fast. Next, there will be a 5nm lithography machine, but it will not be so easy!"

"..."

At this moment, many people thought that the 5nm lithography machine OEM project that Yekong Technology had prepared for a long time was cut off because of the incident that the Kirin company was banned from authorization.

All 5nm lithography machines prepared by Yekong Technology will be sold!

Because of the quality of the previous 7nm lithography machine, many people think that the lithography machine sold by Yekong Technology this time must be cleared at a low price.

· · · Flowers · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·??????

There are also a lot of people ordering.

At this moment, in his own office, seeing some information collected by Li Rui, Ye Kong was a little dumbfounded.

"Are these people stupid?"

Ye Kong couldn't help but sigh.

There are actually so many companies who think that the 5nm lithography machines they are selling now are sold at low prices.

Also need to order in bulk.

"I feel that there are still some companies that have ordered too many orders, and are deliberately placing orders, preparing to make us unable to ship, and then making compensation."

Li Rui also continued to speak at this time.

He also did not expect that after the 5nm lithography machine was put on the shelves, there would be so many companies ordering it.

"Some of them have been checked by the Rockwell Group, and they are all shell companies. President Ye, do we want to ship?"

...... 0

Li Rui hesitated a little at this time, and continued to speak.

Obviously, those companies are not really just using lithography machines to make chips.

Most likely, it is for other purposes.

For example, someone who wants to disassemble a research lithography machine, or...

"Send, they placed the order and paid, of course we all sent it."