I asked you to refurbish it, and you turned a scrap car into a supercar?
Chapter 9 Perfect Repair
Lu Wei secured the cleaned watch fragments to the professional bench vise on the workbench.
He pulled out a special three-jaw dial opener from the bottom of the toolbox and adjusted the spacing of the metal jaws.
The clasp precisely engages in the grooves of Rolex's iconic fluted case back.
Due to prolonged immersion in seawater and internal salt crystallization, the threads on the back cover had long been rusted shut.
Lu Wei gripped the handle of the watch opener tightly with both hands, the veins on the back of his hands bulging, and he suddenly exerted force and pressure to the left with his wrists.
The metal scraped together with a dry, metallic sound, and the sturdy bottom cover finally began to loosen slightly.
He continued to rotate, following the loose momentum, and completely removed the stainless steel back cover with oxide spots.
Rolex's proud 3135 mechanical movement was thus exposed to his view.
The situation inside was far more dire than it appeared on the outside.
The metal plates that once gleamed with a polished sheen are now covered with clusters of bluish-green copper oxide rust.
The gaps in the gear transmission assembly were filled with dried, whitish seawater salt grains.
The most fatal flaw is in the heart of the movement, where the tiny hairspring responsible for controlling the accuracy of timekeeping has been severely broken.
The broken metal wires were tangled together haphazardly, having completely lost their elasticity.
Such devastating physical damage would render a watch unusable in the hands of any skilled watch repairman.
But Lu Wei was not deterred by the terrible scene before him. He only needed to reset the dirt value to zero to turn the tide.
He pulled over a high-brightness shadowless work light and focused the light on the center of the vise.
He then picked up a black magnifying glass with a high magnification lens and clamped it firmly onto his right eye socket.
Holding a pair of anti-static pointed tweezers in his left hand and picking up an extremely fine flathead clock screwdriver in his right, the microscopic disassembly work officially began.
This is a delicate engineering project that demands extreme patience and hand stability.
Lu Wei held his breath and precisely inserted the tip of the knife into the screw slot, which was less than a millimeter wide, and gently loosened it.
He used tweezers to pick up the tiny screws and sorted them into the multi-compartment parts box next to him.
The automatic rotor was removed, followed by the winding mechanism and the mainspring barrel.
He carefully picked out each of the transmission gear sets.
Finally, there was the escapement system, covered in salt and rust.
In less than half an hour, he disassembled a tightly structured mechanical watch into hundreds of scattered tiny parts.
The smallest of these parts is only the size of a sesame seed; if they are accidentally dropped on the ground, they can never be found again.
Lu Wei rubbed his slightly sore right eye, turned around and took out a clean, shallow glass petri dish.
He poured in some of the board cleaning solution and added a few drops of the diluted oxalic acid that he had just used.
To deal with these deep oxides adhering to the fragile gears, a specially formulated solvent must be used for precise targeting.
He picked up a wolf-hair brush and used tweezers to pick up a rusty transmission gear and dip it into the solvent.
The soft bristles of the brush swept back and forth in the gaps on the surface of the gear.
The blue-green oxide layer turns into a cloudy powder under the action of the solvent and is quickly carried away by the brush bristles.
After cleaning a part, he immediately placed it on absorbent paper.
He then picked up the high-pressure air gun, adjusted the pressure at the outlet to the lowest setting, and briefly sprayed the surface of the part.
The remaining solvent was instantly dried by the airflow, revealing the original brass color of the gear.
This set of movements may seem simple, but with hundreds of tiny parts, Lu Wei must maintain a mechanical level of precision in repeating them.
The air in the garage was still stuffy.
Sweat slid down his forehead, gathering into droplets on his chin, and he didn't even bother to raise his hand to wipe it away.
Time flew by amidst the tedious scrubbing.
After he brushed off the salt and alkali from the last broken hairspring assembly with a brush and blew it dry, he leaned heavily against the back of his folding chair.
At that very moment, the blue panel in the lower right corner of the retina burst forth with intense light.
[Current overall dirt level of the item: 0%]
The cleaning objective has been achieved; deep stains have been completely removed.
[The host has completed a complex and challenging mechanical cleaning process, and the integrity of the parts meets the required standards.]
[Triggering the ultimate reward for Lv1 privileges: State rollback!]
The dazzling gold lettering danced and shimmered on the panel.
Immediately afterwards, a strange, pale blue halo appeared on the worktable in the garage.
This halo, like flowing water, enveloped all the hundreds of tiny, scattered parts in the parts box.
Lu Wei stared wide-eyed at the physical reconstruction miracle occurring within the halo of light.
The metal hairsprings that were originally broken into several pieces seemed to come together as if they were alive, enveloped in the halo of light.
The broken sections merged perfectly together, restoring themselves to a regular and compact concentric spiral shape.
The worn ruby bearing surface gleamed with a warm luster, and the pits and scratches were instantly filled in.
The tiny, damaged teeth on the edge of the brass gear are growing back rapidly, becoming sharp and symmetrical again.
The halo spread along the tabletop, climbing onto the oxidized stainless steel case and the shattered dial.
The blackened dial, stained by fire, quickly faded, revealing once again the deep and captivating Rolex green.
The luminous coating powder that had fallen off the dial was reassembled in the air and precisely filled back into the hour markers on the metal frame.
The most amazing thing is the sapphire crystal glass that shattered like a spider web.
The cracks quickly disappeared and healed under the soothing blue light, like the ice layer on a lake refreezing in winter.
The green ceramic bezel on the outer edge has also shed the corrosion marks of seawater and is now reflecting light anew.
In just a few seconds, this molecular-level reversal and repair process came to an end.
The pale blue halo dissipated into the air, leaving only a pile of brand-new, reflective precision parts on the workbench.
Those tiny gears and plates exude the mechanical beauty of when they first came out of the factory, without a trace of the devastation caused by being burned by fire and soaked in seawater.
[Rolex Submariner "Hulk" mechanical watch cleaning and resetting complete]
Experience points gained: 30
Current Lv1 progress: 50/100
Lu Wei let out a long breath of stale air, his eyes filled with fanaticism.
He put his glasses back on, picked up tweezers and a screwdriver, and began the restoration and reassembly work.
Having become familiar with the parts during disassembly, he is now assembling them almost twice as fast as he used to with these brand-new components.
The mainspring barrel is in place, the transmission gear set is precisely engaged, and the escapement mechanism is properly installed.
As he placed the fully remodeled hairspring assembly into the heart of the movement, the familiar and rhythmic ticking sound instantly filled his ears.
The movement was brought back to life, and the tiny gear train operated perfectly under the drive of the mainspring.
Lu Wei put the gleaming stainless steel cover on and screwed it firmly shut with a watch opener.
He picked up the heavy green Submariner watch and examined it closely under the bright light.
The green ceramic bezel paired with the deep dial exudes an indescribable sense of luxury under the light.
The brushed metal texture on the watch strap is clearly visible, without any scratches.
This is not some scrap metal weighed by weight in a junkyard; this is clearly a brand new, top-quality watch just taken out of its display case from an authorized dealer.
Lu Wei took off his gloves, took out his phone from his pocket, and glanced at the time.
It was already past 11 p.m.
Pawn shops and secondhand luxury goods stores would have been closed long ago by now.
He put the watch into a clean plastic resealable bag and pulled down the garage door.
Finally, I can catch my breath a little.
You'll Also Like
-
Star Fleet, Starting with Datafication
Chapter 325 3 hours ago -
Naruto: Traveling Through Time Starting with Seizing the Dragon Vein
Chapter 265 3 hours ago -
One Piece: Blue Scale Admiral
Chapter 941 3 hours ago -
Why bother with dating when you already have a cat?
Chapter 252 3 hours ago -
Tokusatsu: How come this knight drama is different?!
Chapter 735 3 hours ago -
Gundam: From Piece to Player
Chapter 287 3 hours ago -
Primordial Era: Starting with the Immortals of the Jie Sect to Prove the Dao of Hunyuan
Chapter 133 3 hours ago -
After mastering the resurrection technique, they begged me to extend their lives.
Chapter 104 3 hours ago -
Lawyer: Start with legal retaliation against infidelity!
Chapter 352 3 hours ago -
Fanatics of the Magic Academy
Chapter 133 3 hours ago